• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.168-169
• /
• 2000

We have tried to enhance the density of the near-field optical memory and to improve the recording/readout speed. The current optical memory has the limitation in both density and speed. This barrier due to the far-field nature can be overcome by the use of the near-field$^{(1)}$ . The optical data storage density can be increased by reducing the size of the nanometric aperture where the near-field is obtained. To fabricate the aperture in precise dimension, we applied the orientation-dependent / anisotropic etching property of crystal Si often employed in the field of MEMS$^{(2)}$ . And so we fabricated the 10$\times$10 aperture array. This array will be also the indispensable part for speeding up. One will see the possibility of the multi-tracking pickup in the phase changing type memory through this array$^{(3)}$ . This aperture array will be expected to write the bit-mark whose size is about 100nm. We will show the recent result obtained. (omitted)

• Journal of radiological science and technology
• /
• v.8 no.2
• /
• pp.71-72
• /
• 1985

This study was performed on the dose distribution of various field size and the effect of penumbra shield in the telecobalt unit. The results obtained are as follows. 1. Errors of the light and ${\gamma}-ray$ field size was below the regulation as 0.52 percentage. 2. The coefficient of field area was increased with the larger field area, and this coefficient was showed the more difference in larger SSD. 3. The rectangular field areas, which were described by level of the same percentage depth does, were decreased with the more elongation factor. At the same elongation factor, the compensating factor was decreased with the larger field size. 4. The lead block or extension collimator was able to shield r-ray exposure of outside field size from 50 to 80 percentage. 5. On the matching adjacent fields, while the gap between beam edges are contacted, that overlapped beam edges indicated up to 140 percentage, and while the gap was 1 cm, it could be reduced to 90 Percentage. The lead-libocking on the overlapped area was more effective to lower dose, as 80 percentage in this case. 6. Percentage depth dose of various trimming field sizes were increased linearlly according to area 1 perimeter size, but the center split field size did not maintain linearlly.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.248-251
• /
• 2000

The fabrication and characteristics of HTS race-track type field coil for generators was carried out. Field coils are composed of 3 pancake coils wound by 37-filamental Bi-2223/Ag-alloy tapes. The winding machine is horizontal type. The critical currents (I$_c$) of the superconducting tapes were measured with variation of bending strain and external magnetic fields. I$_c$ of both whole field coils and 3 pancake coils were measured as a function of temperature. At 77K under the self-field, I$_c$ of whole field coils was 12A, while in the case of middle pancake coil, I$_c$ was 15A. The distribution of magnetic field B was obtained, using 3-D FEM. Our simulation showed that maximums of B${\bot}$A in x-y plane were locally distributed in both the upper and the lower coils. In addition, the fabrication processes and the characteristics of field coil are described.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.1018-1021
• /
• 2003

This dissertation is reference to measure visual information about the configuration of magnetic field automatically and materialize the new magnetic field mapping system for the rapid and clear measure by using of the mediocrity orthogonal robot in the three- dimensional space required the measure of magnetic field concurrently. The measuring sensor is composed to be available for the measure of three-dimensional direction of magnetic field by vertically conjoining each of three hall sensors utilized of the hall effect and installed Gaussmeter, which is devised to receive the sensor result and the robot controller, away from the measuring robot in order to minimize the affection of magnetic field. Also, the controller and Gaussmeter are composed of Use interface, RS-232C and IEEE-488.2 communication. Interface system is written in NI's LabVIEW and composed to be able to set up a measuring area, the measuring number of times, two and three-dimensional graph, the velocity of robot and the magnetic field distribution graph of each element by inputting parameters. The materialized magnetic field mapping system expert the collection of the data easily and the effect of utilizing data.

• Progress in Superconductivity and Cryogenics
• /
• v.17 no.2
• /
• pp.31-35
• /
• 2015

Mapping is a useful tool in the magnetic field analysis and design. In some specific research area, such as the nuclear magnetic resonance (NMR) or the magnetic resonance imaging (MRI), it is important to map the magnetic field in the interesting space with high accuracy. In this paper, an indirect mapping method in the center volume of an air-core solenoid is presented, based on the solution of the Laplace's equation for the field. Through the mathematical analysis on the mapping calculation, we know that the condition number of the matrix, generated by the measurement points, can greatly affect the error of mapping result. Two different arrangement methods of the measurement points in field mapping are described in this paper: helical cylindrical line (HCL) method and parallel cylindrical line (PCL) method. According to the condition number, the HCL method is recommended to measure the field components using one probe. As a simple example, we mapped the magnetic fields in a MRI main magnet system. Comparing the results in the different methods, it is feasible and convenient to apply the condition number to reduce the error in the field mapping calculation. Finally, some guidelines were presented for the magnetic field mapping in the center volume of the air-core solenoid.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.177-182
• /
• 2015

Many students can experience, such as for credit and social activities through field trips and participate in field trips. For on-site field training exercise participants currently in Gwangju University They take part in field trip 1, 2, 3 and 4 as the type.. Field Practice 1 type in summer and 2 in winter of 4-week period during vacation holidays with 3 credits, field trips 3 type of 8-week period during vacational holidays with 6 credits recognized for \400,000 in job training fee is also payable by the Leaders in INdustry-university Cooperation Agency. 4 types of job training are fourth grade (Architecture Grade 5) can be employed in conjunction for more than 15 weeks and admitted to the second semester of 15 credits by participating in job training. For most schools, but to pay a fee-job training at the University of Hanyang University, Kyungpook National University has a student assistance in the field training participating companies. This establishment does not have a clear idea of the legal entities responsible in the event of industrial accidents. Academic research is also nonexistent state for them. In this paper, we distinguish the personality for it via the existing labor precedents with respect to the legal responsibility of an industrial accident. This aims at putting the means to establish the role of the University of job training support.

• Journal of the Korean earth science society
• /
• v.21 no.1
• /
• pp.13-21
• /
• 2000

In spite of the benefits of field studies, field surveys have not well performed in secondary school. Although many field sites have been developed lately, most field guidebooks describe the geological formations at the outcrops professionally so they can not be used by secondary school students. It is necessary to develop the field study program with which earth science teachers can do field activities easily rather than the one of a highly technical nature. The purpose of this study is to develope a secondary school geology course and to help earth science teachers practice it by providing the efficient teaching methods for the field study

• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.3
• /
• pp.533-544
• /
• 1997

Among numerous factors that have an effect on visual field, the effects of background condition on the size of the visual field were investigated to obtain more practical visual field that can be readily applicable to industrial settings. A visual experiment was conducted, in which the subject was instructed to search a target with distinct orientations. Size contrast, meridian, nontarget density, and subject's gender showed a significant effect on the size of the visual field at $\alpha=0.01$. The size of the visual field was linearly proportional to size contrast, and inversely proportional to density. Female's visual fields were found to be significantly larger than male subjects', The size of the visual field on horizontal axis was larger than that on vertical axis, and the size of the head & eye field on right meridian was also larger than that on left meridian. The shape was found to be horizontally oriented oval and statistically asymmetric with respect to horizontal and vertical axes. The regression equations to predict the visual fields on the given background condition were suggested. The visual fields suggested in this study would be valuable to the design of visual displays and the panel layout of various displays and controls.

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.566-575
• /
• 2008

We investigated the field emission characteristics from the planar field emitters made of double-walled carbon nanotubes (DWCNTs) synthesized by a catalytic chemical vapor deposition (CCVD) method. Transmission electron microscopy, Thermogravimetric and Raman analysis showed that the carbon materials have a low defect level in their atomic carbon structure, pointing to the synthesis of high-purity DWCNTs. For field emission properties of DWCNTs, the turn-on field of DWCNTs was $1.9\;V/{\mu}m$ and the current density was about $74\;mA/cm^2$ at $8.1\;V/{\mu}m$, which is sufficient for the applications of field emission displays and vacuum microelectronic devices. The DWCNT field emitters also exhibited a uniform field emission pattern and good field emission stability in a diode configuration.

• Hwankyungkyoyuk
• /
• v.21 no.3
• /
• pp.1-12
• /
• 2008

This study is aimed at suggesting ways to develop field trip or learning materials focusing on environment of Jeju seashore in order to make an effective field trip. To perform these purposes, the contents and concepts were analyzed from environment-related 'geological unit' of elementary science textbook. Afterwards, the places having the geological features in coincidence with them are chosen, and investigated, and these regions can develop into geological teaming places for field trip. Each teaming spot focuses on understanding and finding out the characteristic geological environment of rock shore, gravel shore, sand shore, shellfish shore, and tideland shore among Jeju shores. When field trip is conducted at the preparatory stage, students can get advance knowledge on geological concepts from textbook. The activity record paper is presented at the field trip stage where students observe geological phenomena on their own. After field trip is finished, the summary stage is given to solve some problems on the basis of the observed contents. The developed data from this research have its regional limits, but is surely useful for teachers who try to plan field trip when they especially choose the right field trip spots, or plan to make the process for field trip preparation of the environmental education. Furthermore, with this survey and activities, students can take the chance to improve the learning effect through their own experience on environment of Jeju seashore.