• Journal of Mechanical Science and Technology
• /
• 제18권8호
• /
• pp.1461-1469
• /
• 2004

Acoustic characteristics in an industrial gas-turbine combustor are numerically investigated by a linear acoustic analysis. Spatially non-homogeneous temperature field in the combustor is considered in the numerical calculation and the characteristics are analyzed in view of acoustic instability. Acoustic analyses are conducted in the combustors without and with acoustic resonator, which is one of the acoustic-damping devices or combustion stabilization devices. It has been reported that severe pressure fluctuation frequently occurs in the adopted combustor, and the measured signal of pressure oscillation is compared with the acoustic-pressure response from the numerical calculation. The numerical results are in good agreement with the measurement data. In this regard. the phenomenon of pressure fluctuation in the combustor could be caused by acoustic instability. From the numerical results for the combustor with present acoustic resonators installed, the acoustic effects of the resonators are analyzed in the viewpoints of both the frequency tuning and the damping capacity. It is found that the resonators with present specifications are not optimized and thus, the improved specification or design is required.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 1999년도 제1회 학술대회논문집(KIASC 1st conference 99)
• /
• pp.10-13
• /
• 1999

For large scale applications of high temperature superconductor(HTS) such as transmission cables, motors and generators, long length of flexible HTS conductors is required. Currently, HTS tape that is capable of being fabricated in long length by industrial processes is the Bi-2223 HTS tape. In this study, we fabricated 19 filamentary Bi-2223($Bi_{1.8}$$Pb_{0.4}$$Sr_{2}$$Ca_{2}$$Cu_{3}$$O_{10+X}$) HTS tape with 100m length by PIT(Powder In Tube) process. Critical current(Ic) of this long length tape was measured 18.5 A at 77 K, self field and short sample Ic is 32.5 A at the same condition. Critical current of 100m length tape was decreased by about 1/3 compared to that of short tape. This was mainly resulted from the increase of non homogeneity in oxide layer.

• Structural Engineering and Mechanics
• /
• 제4권6호
• /
• pp.703-715
• /
• 1996

In stochastic analysis, the randomness of the structural parameters is taken into consideration and the response variability is obtained in addition to the conventional (mean) response. In the present paper the structural response variability of plate structure is calculated using the weighted integral method and is compared with the results obtained by different methods. The stochastic field is assumed to be normally distributed and to have the homogeneity. The decomposition of strain-displacement matrix enabled us to extend the formulation to the stochastic analysis with the quadratic elements in the weighted integral method. A new auto-correlation function is derived considering the uncertainty of plate thickness. The results obtained in the numerical examples by two different methods, i.e., weighted integral method and Monte Carlo simulation, are in a close agreement. In the case of the variable plate thickness, the obtained results are in good agreement with those of Lawrence and Monte Carlo simulation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1292-1297
• /
• 2004

Acoustic characteristics in an industrial gas-turbine combustor are numerically investigated by adopting linear acoustic analysis. Spatially non-homogeneous temperature field in the combustor is considered in the numerical calculation and the characteristics are analyzed in view of acoustic instability. Acoustic analysis are conducted in the combustors without and with acoustic resonator, which is one of combustion stabilization devices. It has been reported that severe pressure fluctuation frequently occurs in the adopted combustor, and the measured signal of pressure oscillation is compared with the acoustic-pressure response from the numerical calculation. The numerical results are in a good agreement with the measurement data. In this regard, the phenomenon of pressure fluctuation in the combustor could be caused by acoustic instability. The acoustic effects of the resonators are analyzed in the viewpoints of both the frequency tuning and the damping capacity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.93-94
• /
• 2006

The $I_c$ degradation behavior of YBCO CC tapes due to torsional deformation has been investigated. Particularly, the influence of torsion angle on the $I_c$ in HTS tapes was examined at 77K (self-field). At low torsional angles or shear strains, the $I_c$ degradation was small and gradual. Also, a good consistency of the $I_c$ degradation behaviors was found along the longitudinal direction under torsion when multiple voltage terminals were adopted for investigating the homogeneity of the $I_c$ degradation.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권4호
• /
• pp.1-7
• /
• 2009

The unique features of HTS offer Opportunities and challenges to a number of applications. In this paper we focus on NMR and MRI magnets, illustrating them with the NMR/MRI magnets that we are currently and will shortly be engaged: a 1.3GHz NMR magnet, an "annulus" magnet, and an $MgB_2$ whole-body MRI magnet. The opportunities with HTS include: 1) high fields (e.g., 1.3GHz magnet); 2) compactness (annulus magnet); and 3) enhanced stability despite liquid-helium-free operation ($MgB_2$ whole-body MRI magnet). The challenges include: 1) a large screening current Beld detrimental to spatial field homogeneity (e.g., 1.3 GHz magnet); 2) uniformity of critical current density (annulus magnet); and 3) superconducting joints ($MgB_2$ magnet).

• 대한방사선치료학회지
• /
• 제33권
• /
• pp.137-144
• /
• 2021

목 적 : VMAT을 이용한 쇄골 상부 림프절을 포함하는 왼쪽 유방암 치료 시 X-Jaw를 나눈 치료계획과 기존 Full field VMAT 치료계획과의 선량분포를 비교 분석하여 X-Jaw split VMAT의 유용성을 평가하였다. 대상 및 방법 : 쇄골 상부 림프절을 포함하는 왼쪽 유방암 환자 10명을 대상으로 Vacuum cushion을 이용하여 CT simulation 하고 2 Arc Full field VMAT과 4 Arc X-Jaw split VMAT을 각각 치료계획 하였다. 각 치료계획은 처방 선량(Prescription dose)이 치료계획표적용적(Planning Target Volume, PTV)의 95% 이상 포함이 되고 주변 정상장기(Organ at risk, OAR)에 최소한으로 조사되도록 설계하였다. 이후 선량체적용적(Dose volume histogram, DVH)을 통해 PTV과 OAR의 대한 선량분석을 하였다. 결 과 : 10명의 환자의 Full field VMAT치료계획과 X-Jaw split VMAT치료계획의 데이터를 평균값으로 나타내어 비교하였다. 처방선량지수(conformity index, CI) 1.05±0.04, 1.04±0.03, 선량균질지수(homogeneity index, HI) 1.07±0.008, 1.07±0.009 로 두 치료계획 간 차이는 크지 않았다. OAR의 경우 왼쪽 폐의 V5 56.1±6.50%, 50.4±6.30%, V20 20.0±4.15%, 13.52±3.61% 로 Full field VMAT대비 X-Jaw split VMAT에서 V5이 10.0% V20은 32.6% 감소하였다. 심장의 V30은 3.68±1.85%, 2.23±1.52%, 평균 선량은 8.93±1.65 Gy, 7.67±1.52 Gy로 X-Jaw split VMAT에서 V30은 39.3%, 선량은 14.1% 감소하였다. 정상조직인 왼쪽 폐와 심장은 통계적 유의 수치인 p-value 0.05미만으로 나타났다. 결 론 : PTV의 체적이 크고 X Jaw의 길이가 15 cm 이상이 되는 쇄골 상부 림프절을 포함하는 왼쪽 유방암치료의 경우 X-Jaw split VMAT 치료계획은 기존의 치료계획과 동등한 HI와 CI로 유사한 PTV coverage를 유지 하면서 개선된 선량분포를 나타내 OAR인 폐와 심장 등의 방사선량을 줄일 수 있어 부작용을 줄이는데 효과적이라고 생각된다.

• Radiation Oncology Journal
• /
• 제35권1호
• /
• pp.78-89
• /
• 2017

Purpose: To determine the optimal radiotherapy technique for gastric mucosa-associated lymphoid tissue lymphoma (MALToma), we compared the dosimetric parameters and the risk of solid secondary cancer from scattered doses among anterior-posterior/ posterior-anterior parallel-opposed fields (AP/PA), anterior, posterior, right, and left lateral fields (4_field), 3-dimensional conformal radiotherapy (3D-CRT) using noncoplanar beams, and intensity-modulated radiotherapy composed of 7 coplanar beams (IMRT_co) and 7 coplanar and noncoplanar beams (IMRT_non). Materials and Methods: We retrospectively generated 5 planning techniques for 5 patients with gastric MALToma. Homogeneity index (HI), conformity index (CI), and mean doses of the kidney and liver were calculated from the dose-volume histograms. Applied the Biological Effects of Ionizing Radiation VII report to scattered doses, the lifetime attributable risk (LAR) was calculated to estimate the risk of solid secondary cancer. Results: The best value of CI was obtained with IMRT, although the HI varied among patients. The mean kidney dose was the highest with AP/PA, followed by 4_field, 3D-CRT, IMRT_co, and IMRT_non. On the other hand, the mean liver dose was the highest with 4_field and the lowest with AP/PA. Compared with 4_field, the LAR for 3D-CRT decreased except the lungs, and the LAR for IMRT_co and IMRT_non increased except the lungs. However, the absolute differences were much lower than <1%. Conclusion: Tailored RT techniques seem to be beneficial because it could achieve adjacent organ sparing with very small and clinically irrelevant increase of secondary solid cancer risk compared to the conventional techniques.

• Journal of Yeungnam Medical Science
• /
• 제36권1호
• /
• pp.36-42
• /
• 2019

Background: The purpose of this study was to evaluate the efficacy and feasibility of non- coplanar whole brain radiotherapy (NC-WBRT) for parotid sparing. Methods: Fifteen cases, previously treated with WBRT were selected. NC-WBRT plans were generated. The beam arrangement for the non-coplanar plans consisted of superior anterior, right, and left beams. After generation of the non-coplanar plans a field-in-field technique was applied to the bilateral parallel opposed beams in order to reduce maximum dose and increase dose homogeneity. The NC-WBRT plans were subsequently compared with the previously generated bilateral WBRT (B-WBRT) plans. A field-in-field technique was also used with the B-WBRT plans according to our departmental protocol. As per our institutional practice a total dose of 30 Gy in 10 fractions of WBRT was administered 5 days a week. Results: The mean dose to the parotid gland for the two different plans were 16.2 Gy with B-WBRT and 13.7 Gy with NC-WBRT (p<0.05). In the NC-WBRT plan, the V5Gy, V10Gy, V15Gy, V20Gy, and V25Gy of the parotid were significantly lower (p<0.05) than those of the B-WBRT plan. The $D_{max}$ of the lens was also lower by 10% with NC-WBRT. Conclusion: The use of NC-WBRT plans could be a simple and effective method to reduce irradiated volumes and improve the dose-volume parameters of the parotid gland.

• 한국광학회지
• /
• 제8권5호
• /
• pp.377-381
• /
• 1997

MgO가 2 mole% 첨가된 LiNbO$_{3}$ 결정을 3 V/cm, 5 V/cm, 7 V/cm의 전기장에서 poling하여, 5 V/cm의 전기장이 최적의 조건임을 제2고조파발생의 온도의존도특성을 관찰하여 알 수 있었다. 결정에 공간적으로 변조된 전기장을 인가하여 온도 위상 정합 모양이 찌그러짐을 관찰하였으며, 이 결과와 잘 일치하는 계산값을 정량적으로 구할 수 있었다. 이것으로부터 제2고조파의 온도위상정합모양을 이용하여 결정의 균일성을 판단할 수 있음을 증명하였다. 5 V/cm로 poling된 단결정의 온도 위상 정합 모양으로부터 온도에 따른 복굴절의 변화율, c-축으로 전기장을 인가하여 변화된 위상 정합 온도로부터 전기장에 따른 복굴절의 변화율을 계산하였다.