• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.120-129
• /
• 2016

The user cost is an important analysis item which should be considered together with life-cycle of facility, administrator cost and discount rate in LCCA for efficient asset management of SOC facilities. Especially, a significant delay cost occurs often for users in the road field due to a work zone for cleaning and maintenance, and in such case, the administrator should consider the administrator cost as well as the user cost for more rational decision making. However, the user cost has not been considered in most decision making steps until recently and relevant studies also have not been carried out actively. In this study, the methodology to estimate the user cost and delay cost required in the decision making step using the traffic flow model and the direct benefit estimation model in the traffic facility investment evaluation guideline is suggested. And, the traffic flow model was estimated on 4 national highway sections where maintenance was actually carried out in 2014 using VISSIM and, the user cost and the delay cost were estimated based on the suggested methodology. The analysis result showed that the average user cost of $17,569,000KRW/km{\times}day$ occurred on Section A with approximately 30,000 AADT before a work zone occurred, and in case the first lane was blocked for maintenance, the delay cost of $10,193,000KRW/km{\times}day$ (158%) on average occurred additionally. The delay cost of $1,507,000KRW/km{\times}day$ (115%) and $1,985,000KRW/km{\times}day$ (119%) occurred on Sections B and D with approximately 20,000 AADT respectively and the delay cost of $262,000KRW/km{\times}day$ (105%) occurred on Section C with approximately 10,000 AADT. This result of this study was estimated based on the simulation of traffic flow model so that there is a limitation in its actual application. A study ot develop a highly appropriate model using actual observation data and improve the possibility to apply it through the verification using the simulation will be necessary in future.

• Journal of the Korean Chemical Society
• /
• v.62 no.4
• /
• pp.299-313
• /
• 2018

Inquiry-centered education is important in science education, but in the actual education field, scientific research is being done in a uniform manner due to realistic difficulties. In this study, we use RS (Reverse Science) as a secondary chemistry class to provide opportunities for students to engage in inquiry learning and scientific thinking through process-oriented activities. In this study, we developed and applied it to explore the effects on the scientific inquiry abilities of middle school students and checked the students' perception of it. For the application of the program, 128 students were selected from 6 classes of the 2nd grade in D district middle school, 64 from the experimental group and 64 from the comparative group. The experimental group taught RSP-based the chemistry inquiry programs and the comparative group taught instructor-led classes and verification experiments on the same topic over the seventh hour with three themes. In addition, we analyzed the results of the pre- and post-test by using the science inquiry ability test, and discussed the effects of the program based on the students' perceptions through class observation, student activity area, questionnaire and interview. As a result, the class using the program showed statistically significant changes in the science inquiry ability of secondary school students. Specifically, the experimental group was found to be significant in its prediction among the subcomponents of basic exploration ability compared to the comparative group. The differences have also been shown to be significant in terms of data translation, hypothesis setup and variable control, which are subcomponents of integrated exploration capabilities (p <. 05). In addition, students became interested in the process of creating the theory of science, and were highly interested in collaborating with their friends. It also provided students with opportunities to experience scientific thinking through process-oriented inquiry. Finally, based on the positive impact of the RSP-based chemistry inquiry program on students, we were able to identify the potential use of the program.

• Korean Journal of Environment and Ecology
• /
• v.28 no.6
• /
• pp.657-663
• /
• 2014

This study was conducted to investigate the difference in feeding habits of Red-Tongued Viper Snakes, according to available foods sources and areas. The effects of differences in food sources were found on Red-Tongued Viper Snake inhabited in the Jeju Island and its islet Gapado, from May 2006 to Nov. 2010. The food sources for the Red-Tongued viper snake population in the Jeju Island were found to be as follows: Chinese red-headed centipedes (Scolopendra subspinipes mutilans), Jeju Salamanders (Hynobius quelpaertensis), Japanese tree Frogs (Hyla japonica), Narrow-mouthed Toad (Kaloula borealis), Dybowski's Brown Frogs (Rana dybowskii), Black-spotted Pond Frogs (Rana nigromaculata), Smooth Skinks (Scincella vandenburghi), Asian Keelback Snakes (Amphiesma vibakari), Lesser White-toothed Shrews (Crosidura shantungensis), Hallasan Shrews (Sorex caecutiens hallamontanus), and Jeju Striped Field Mice (Apodemus chejuensis). This implies that Red-Tongued Viper Snakes mainly feed on amphibians, reptiles, and small mammals. Among these, amphibians occupied the highest portion at 55.2% followed by mammals at 20.7%, centipedes at 13.8%, and reptiles at 10.3%. On the contrary, Red-tongued viper snake population in Gapado only feed on Chinese red-headed centipedes and Smooth Skinks (S. vandenburghi). Since only a small amount of nutrient can be obtained from Chinese red-headed centipeds or Smooth Skinks, this feeding habit for Red-tongued viper snake would adversely effect on the growth or regeneration. The reason why Red-Tongued viper snake population in the Gapado mainly feed on Lizard and Centipedes in spite of relatively various available food sources, might be due to the low density of other food sources in the Gapado. Red-Tongued viper snake could be feeding on foods that are low in quality but are easily accessible, to minimize energy consumption on searching for other more nutritious foods. A snake tends to select the size of its food depending on the size of its own head. The positive correlation was found between the size of the heads of Red-Tongued viper snakes from the Jeju island and the diameter of their foods. The head size was larger in the males than females in viper snake population from the Jeju Island, which might effect on their selection of foods. However, no significant difference was found between the sizes of the head and the food in the Red-Tongued viper snake population from the Gapado. The findings of this study would provide meaningful data, which directly shows that even within the same viper species they choose different available food sources according to their inhabitance. This leads to their growth and adaptation to their environment which is beneficial for sustaining of its population.

• Korean Journal of Environment and Ecology
• /
• v.31 no.2
• /
• pp.266-274
• /
• 2017

The purpose of this study was to analyze the number of visitors to the top of Seoseokdae in Mudeungsan National Park, in which visitors are concentrated, and their visiting patterns, thereby suggesting measures to manage the visitors. The number of annual visitors and the numbers of regional and seasonal visitors to Mudeungsan National Park, which affect the concentration of visits to Seoseokdae were analyzed using the data produced by an automatic digitizing device. A field study was conducted to examine the number of seasonal and periodic visitors to Seoseokdae and their visiting patterns. In 2015, the number of visitors was 2,563,651 and 83.9% of the visitors visited via the Jeungsimsa and Wonhyosa area that is near Gwangju City. This area is close to the Seoseokdae area and it is easy to hike between the areas. Therefore, there was an influx of most visitors to Seoseokdae into the Jeungsimsa and Wonhyosa area. In terms of seasonal visitors, the largest number of visitors came in the fall, followed by the summer, spring, and winter in order. However, the seasonal differences were not notable. There was no statistically significant correlation between the number of visitors and meteorological factors. This result may have been because Gwangju citizens frequently visit Mudeungsan regardless of period and weather. Visitors can get to Seoseokdae via the trails into Wonhyosa and Jangbuljae. A slightly larger number of visitors used the trail into Jangbuljae in the fall and winter, whereas a larger number of visitors used the trail into Wonhyosa in the summer. In general, there is a large influx of visitors into Jangbuljae, a strategic visiting point. However, a slightly larger number of visitors may have chosen the trail into Wonhyosa in the summer because they could hike under the shade of trees. In the summer, visitors stayed in Seoseokdae for a short time with a low level of crowdedness. On the other hand, in the fall and winter, visitors stayed in the area longer because they had lunch and rested. During the time, the number of momentary maximum visitors peaked, causing extreme crowdedness. Therefore, some visitors showed the visiting pattern of entering the grassland outside the designate zone. Because this behavior can damage the grassland on the top of Seoseokdae, which can lead to soil erosion, intensive visitor management may be necessary.

• Journal of Bio-Environment Control
• /
• v.24 no.2
• /
• pp.123-127
• /
• 2015

Wood piles are rarely used in the construction of a greenhouse in Korea, but they are relatively more often used in other countries, such as the Netherlands. There are several advantages associated with wood piles: they are more cost-effective, less time-consuming, and more ecofriendly than the steel pipes (SPs) and pre-stressed highstrength (PHC) piles. However, one of the limiting conditions is that they have to be installed below the groundwater level to prevent decay. Since the groundwater levels are generally high in the reclaimed lands in Korea, wood piles are expected to be used often as reinforcements for foundations of greenhouses in these areas. In this study, we measured the uplift capacities of wood piles through in-situ uplift capacity tests with an aim to provide basic design data for wood pile foundations. In order to test their applicability, we then compared these experimentally measured ultimate uplift capacities with the ones calculated through some of the existing theoretical equations. The wood piles used in the loading tests were made of softwood (pine wood), and the tests were performed using piles with different diameters (∅25cm and ∅30cm) and embedded depths (1m, 3m, and 5m). The test results revealed that the uplift capacity of the wood piles showed a clear linearly increasing tendency in proportion to the embedded depth, with the ultimate uplift capacities for the diameters 25cm and 30cm being 9.38 and 10.56tf, respectively, at the embedded depth of 5m; thus demonstrating uplift capacities of ${\geq}9tf$. The comparison between the actually measured values of the uplift capacity and the ones calculated through equations revealed that the latter, which were obtained using the ${\alpha}$ method, were generally in an approximate agreement with the in-situ measured values.

• Progress in Medical Physics
• /
• v.3 no.2
• /
• pp.1-12
• /
• 1992

For intraoperative radiation therapy using electron beams, a cone system to deliver a large dose to the tumor during surgical operation and to save the surrounding normal tissue should be developed and dosimetry for the cone system is necessary to find proper X-ray collimator setting as well as to get useful data for clinical use. We developed a docking type of a cone system consisting of two parts made of aluminum: holder and cone. The cones which range from 4cm to 9cm with 1cm step at 100cm SSD of photon beam are 28cm long circular tubular cylinders. The system has two 26cm long holders: one for the cones larger than or equal to 7cm diamter and another for the smaller ones than 7cm. On the side of the holder is an aperture for insertion of a lamp and mirror to observe treatment field. Depth dose curve. dose profile and output factor at dept of dose maximum. and dose distribution in water for each cone size were measured with a p-type silicone detector controlled by a linear scanner for several extra opening of X-ray collimators. For a combination of electron energy and cone size, the opening of the X-ray collimator was caused to the surface dose, depths of dose maximum and 80%, dose profile and output factor. The variation of the output factor was the most remarkable. The output factors of 9MeV electron, as an example, range from 0.637 to 1.549. The opening of X-ray collimators would cause the quantity of scattered electrons coming to the IORT cone system. which in turn would change the dose distribution as well as the output factor. Dosimetry for an IORT cone system is inevitable to minimize uncertainty in the clinical use.

• The Journal of Information Systems
• /
• v.25 no.1
• /
• pp.1-23
• /
• 2016

Purpose Self-congruity deals with the effect of symbolic value-expressive attributes on consumer decision and behavior, which is the theoretical foundation of the "non-utilitarian destination positioning". Functional congruity refers to utilitarian evaluation of a product or service by consumers. In addition, recent years, social network services, especially mobile social network services have created many opportunities for e-WOM communication that enables consumers to share personal consumption related information anywhere at any time. Moreover, self-construal is a hot and popular topic that has been discussed in the field of modem psychology as well as in marketing area. This study aims to examine the moderating effect of self-construal on the relationship between self-congruity, functional congruity and tourists' positive electronic word of mouth (e-WOM). Design/methodology/approach In order to verify the hypotheses, we developed a questionnaire with 32 survey items. We measured all the items on a five-point Likert-type scale. We used Sojump.com to collect questionnaire and gathered 218 responses from whom have visited Korea before. After a pilot test, we analyzed the main survey data by using SPSS 20.0 and AMOS 18.0, and employed structural equation modeling to test the hypotheses. We first estimated the measurement model for its overall fit, reliability and validity through a confirmatory factor analysis and used common method bias test to make sure that whether measures are affected by common-method variance. Then we tested the hypotheses through the structural model and used regression analysis to measure moderating effect of self-construal. Findings The results reveal that the effect of self-congruity on tourists' positive e-WOM is stronger for tourists with an independent self-construal compared with those with interdependent self-construal. Moreover, it shows that the effect of functional congruity on tourists' positive e-WOM becomes salient when tourists' self-construal is primed to be interdependent rather than independent. We expect that the results of this study can provide important implications for academic and practical perspective.

• Tuberculosis and Respiratory Diseases
• /
• v.52 no.2
• /
• pp.179-185
• /
• 2002

A bronchus-associated lymphoid tissue(BALT) lymphoma of the lung is a rare disorder of patients with Sj$\ddot{o}$gren's syndrome. A 49-year-old woman was admitted for an evaluation of exertional dyspnea and general weakness which had persisted for two years. The patient had suffered from dry mouth and dry eyes for five years. The physical examinations showed a coarse breath sound with inspiratory crackles on the whole lung field, particularly on the both basal lungs. The laboratory data disclosed high titers of anti-nuclear antibodies, and anti-SSA (Ro), and anti-SSB (La) antibodies. Chest radiographs demonstrated the presence of bilateral, diffuse, reticulonodular densities in both lungs. Thin-section CT scans showed diffusely distributed mosaic pattern of an inhomogeneous attenuation extending over the entire lung zone. The histological findings from an open-lung biopsy specimen revealed an accumulation of lymphoid cells around the bronchioles and an extension of malignant lymphoma cells from the bronchiolar epithelium toward the alveolar space. Immunohistochemically, the neoplastic cells reacted positively to the CD 20 antigen and were focally positive for the UCHL 1 antigen. The histological diagnosis was consistent with a low grade marginal zone B-cell lymphoma originating in the BALT. Here, we present a case of a histologically proven BALT lymphoma of the lung in a patient with primary Sj$\ddot{o}$gren's Syndrome.

• The Journal of the Petrological Society of Korea
• /
• v.16 no.2 s.48
• /
• pp.82-99
• /
• 2007

The Paleogene dikes intruding into the late Cretaceous granodiorite are pervasively observed in the Irun-myeon, eastern Geoje Island. They are classified into three groups: NW-trending acidic dike swarm and WNW- (A-Group) and $NS{\sim}NNE-trending$ (B-Group) basic dike swarms. Based on their cross-cutting relationships, the earliest is the acidic dike group and fellowed by A- and B-Groups in succession. The acidic dikes seem to have intruded into tension gashes induced by the sinistral strike-slip faulting of the Yangsan fault system during the late $Cretaceous{\sim}early$ Paleogene. In terms of rock-type, orientation, age, and geochemistry, A-Group and B-Group are intimately correlated with the intermediate and basic dike swarms in the Gyeongju-Gampo area, respectively. These results significantly suggest that the corresponding dike swarms are genetically related. Based on the K-Ar and Ar-Ar age data, A- and B- Groups were intruded during $64{\sim}52\;Ma$ and $51{\sim}44\;Ma$, respectively. The result means that the direction of tensional stress in and around the SE Korean peninsula was changed abruptly from NNE-SSW to $EW{\sim}WNW-ESE$ at about 51 Ma. Considering the tectonic environments during the Paleogene, it is interpreted that A-Group was injected along the WNW-trending tensional fractures developed under an regional sinistral simple shear regime which was caused by the north-northwestward oblique subduction of the Pacific plate beneath the Eurasian plate. Meanwhile, the regional stress caused by the collision of India and Eurasia continents at about 55 Ma was likely propagated to the East Asia at about 51 Ma, and then the East Asia including the Korean peninsula was extruded eastwards as a trench-rollback and the dip of downgoing slab of the Pacific plate was abruptly steepened. As a result, the strong suction-force along the plate boundary produced a tensional stress field trending EW or WNW-ESE in and around the Korean peninsula, which resultantly induced B-Group to intrude passively into the study area.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.6
• /
• pp.346-361
• /
• 2013

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2012. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. The conclusions are as follows : (1) The research works on thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and valves, fuel cells and power plants, ground-coupled heat pumps, and general heat and mass transfer systems. Research issues are mainly focused on new and renewable energy systems, such as fuel cells, ocean thermal energy conversion power plants, and ground-coupled heat pump systems. (2) Research works on the heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, and industrial heat exchangers. Researches on heat transfer characteristics included the results for natural convection in a square enclosure with two hot circular cylinders, non-uniform grooved tube considering tube expansion, single-tube annular baffle system, broadcasting LED light with ion wind generator, mechanical property and microstructure of SA213 P92 boiler pipe steel, and flat plate using multiple tripping wires. In the area of pool boiling and condensing heat transfer, researches on the design of a micro-channel heat exchanger for a heat pump, numerical simulation of a heat pump evaporator considering the pressure drop in the distributor and capillary tubes, critical heat flux on a thermoexcel-E enhanced surface, and the performance of a fin-and-tube condenser with non-uniform air distribution and different tube types were actively carried out. In the area of industrial heat exchangers, researches on a plate heat exchanger type dehumidifier, fin-tube heat exchanger, an electric circuit transient analogy model in a vertical closed loop ground heat exchanger, heat transfer characteristics of a double skin window for plant factory, a regenerative heat exchanger depending on its porous structure, and various types of plate heat exchangers were performed. (3) In the field of refrigeration, various studies were executed to improve refrigeration system performance, and to evaluate the applicability of alternative refrigerants and new components. Various topics were presented in the area of refrigeration cycle. Research issues mainly focused on the enhancement of the system performance. In the alternative refrigerant area, studies on CO2, R32/R152a mixture, and R1234yf were performed. Studies on the design and performance analysis of various compressors and evaporator were executed. (4) In building mechanical system research fields, twenty-nine studies were conducted to achieve effective design of mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, renewable energy systems, and lighting systems in buildings. New designs and performance tests using numerical methods and experiments provide useful information and key data, which can improve the energy efficiency of buildings. (5) In the fields of the architectural environment, studies for various purposes, such as indoor environment, building energy, and renewable energy were performed. In particular, building energy-related researches and renewable energy systems have been mainly studied, reflecting interests in global climate change, and efforts to reduce building energy consumption by government and architectural specialists. In addition, many researches have been conducted regarding indoor environments.