• 전기학회논문지
• /
• 제66권3호
• /
• pp.593-598
• /
• 2017

Induction generator is always required reactive power in order to generate a rotating magnetic field as an inductive load. The reactive power must be continuously supplied to the induction generator as well as load of distribution system from the power supply side. So the power factor of the power supply side during the induction generation operation is low. Condenser is installed in order to raise the low power factor of the induction generator. Switching transients occurs when the power supply of the capacitor is turned on in order to ensure the low power factor. When using the reactor in series with the capacitor in order to reduce the influence of switching transient, it can affect the reactive power by the condenser voltage rises. In this study, we analyzed the operating characteristics for power and power factor of induction generator in accordance with the presence or absence of the application of the serial reactors for switching transients reduction of the condenser and the condenser for power factor correction.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2004년도 추계학술발표논문집(상)
• /
• pp.829-832
• /
• 2004

실제영상으로 가상환경을 구축해서 사용자가 가상환경을 돌아다님으로써 보다 큰 몰입감과 현실감을 제공하는 영상기반 가상현실 기술은 최근 들어 웹 기반 가상현실시스템을 구축하기 위해서 많이 사용된다. 이 기술은 가상환경 구축에 있어 항해를 쉽게 하기 위한 한 방법으로 넓은 시각 영역(field of view)을 얻을 수 있는 wide-angle 렌즈를 흔히 사용한다. 어안렌즈(fish-eye lens)는 전형적인 넓은 시각 영역을 가진 렌즈로서, 매우 큰 radial distortion 을 가진다. 왜곡을 없앤 영상을 얻기 위해 본 논문에서는 구면기하(spherical geometry) 및 사영기하(projective geometry)를 사용하여 어안영상을 보정하는 non-metric기법을 제안한다. 제안한 이 방법은, 기존의 방법들 보다는 쉽고 빠른 속도로 왜곡을 보정할 수 있으므로 어안영상의 왜곡을 보정하는 하드웨어를 효율적으로 구현할 수 있다. 그리고 spheroid 를 이용해 좀 더 왜곡을 정확히 보정방법과 별도의 서보 모터 없이 pan/title 를 가능케 하는 시점이동에 따른 왜곡 보정 방법을 제시한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2702-2704
• /
• 2003

본 논문은 전력선통신시스템 (Power Line Communications)을 위한 초고속 오류정정 부호화기 회로에 관한 설계방법론과 회로의 동작속도, 회로복잡성과 레이턴시에 직접적으로 기여하는 핵심 GF (Galois Field) 연산기들의 역할 및 이들의 설계결과에 관해 설명한다. 특히, 이러한 설계방법에 충실한 오류정정 부호화기회로는 입출력 병렬구조의 세미-시스톨릭 (Semi-systolic) 아키텍처를 갖는 고속의 내부 핵심 GF 연산기회로들을 채택함으로써 고속 연산을 가능토록 한다. 최적화된 GF곱셈연산기를 기반으로 설계되어진 리드-솔로몬 (Reed-Solomon) 오류정정 부호화기는 전력선 채널상에서 데이터를 전송 시 발생되는 연집오류들을 효과적으로 복원하도록 하는 대표적인 부호화기로 이미 존재하는 다른 회로들에 비해 동작속도, 회로의 복잡성, 및 레이턴시 측면에서 그 성능이 월등히 뛰어나므로, 실제 초고속 전력선 통신시스템의 설계 및 구현 시 효과적으로 이용될 수 있다.

• 한국자동차공학회논문집
• /
• 제15권1호
• /
• pp.78-88
• /
• 2007

In the present study a detailed examination of various porous media models for predicting filtration efficiency and pressure drop of diesel particulate filter (DPF), such as sphere-in-cell and constricted tube models, are attempted. In order for demonstrating their validities of correct estimation on permeability, geometry of property configurations common in commercial cordierite DPFs are correlated to the porous media flow models, and validations of predicted filtration efficiencies due to the use of different unit collectors are made with experiments. The result shows that the porosity, pore size and permeability of cordierite DPF can be successfully correlated by Kuwabara flow field with correction factor of 0.6. The unit collector efficiency predicted by sphere-in-cell model agrees very well with measurements in accumulation mode, whereas that by constricted tube model with significant prediction error.

• 전력전자학회논문지
• /
• 제2권4호
• /
• pp.45-55
• /
• 1997

FA의 중요성이 증가함에 따라 AGV(Autonomous Guided Vehicle)의 역할 또한 중요시되고 있다. 본 논문은 인공 지능의 여러 방법론을 통합하여 하이브리드 형태의 제어기가 가질 수 있는 상호 보완적인 특징을 이용하고자 하며, 유전자 알고리즘에 의한 자기조직이 가능한 퍼지제어기로써 능동적이고 효과적인 AGV 제어기를 구성하고자 한다. 자기 조직이 가능한 퍼지 제어기는 구성하기 위하여 GA(Genetic Algorithm)를 사용하여 멤버십 함수와 제어 규칙을 최적에 근사하게 튜닝하였으며 제어 규칙의 자기 수정 또는 생성을 통하여 제어 성능을 향상시킨다.

• 스마트미디어저널
• /
• 제6권3호
• /
• pp.49-56
• /
• 2017

Images and Videos that include the human face contain a lot of information. Therefore, accurately extracting human face is a very important issue in the field of computer vision. However, in real life, human faces have various shapes and textures. To adapt to these variations, A model-based approach is one of the best ways in which unknown data can be represented by the model in which it is built. However, the model-based approach has its weaknesses when the motion between two frames is big, it can be either a sudden change of pose or moving with fast speed. In this paper, we propose an enhanced human face-tracking model. This approach included human face detection and motion estimation using Cascaded Convolutional Neural Networks, and continuous human face tracking and modeling correction steps using the Active Appearance Model. A proposed system detects human face in the first input frame and initializes the models. On later frames, Cascaded CNN face detection is used to estimate the target motion such as location or pose before applying the old model and fit new target.

• Archives of Plastic Surgery
• /
• 제37권4호
• /
• pp.499-530
• /
• 2010

Purpose: Lateral osteotomy is an essential step in the correction of nasal bony asymmetry. Direct visualization allows accurate repositioning of the nasal bones compared to blind techniques, which require precision and manual dexterity. We propose direct visualization procedures in open corrective rhinoplasty. Methods: The technique was used on 16 patients. All patients underwent open rhinoplasty with a columellar incision. The marginal incisions were extended on either side to allow access to the piriform aperture. A double hook was used to caudally retract the lower lateral cartilages and the fibrous connections between the upper and lower lateral cartilages were released until the piriform aperture was visualized. Through the incision, lateral osteotomy was performed using a reciprocating saw at that time with direct visualization. Additional procedures including augmentation rhinoplasty, hump resection, septoplasty and tip plasty were performed simultaneously. Results: This method provided excellent exposure to the lateral nasal bones and allowed the lateral osteotomy to be carried out precisely using the reciprocating saw. Conclusion: This extended open rhinoplasty method is suitable for most individuals, allowing a wide surgical field.

• Journal of Welding and Joining
• /
• 제7권1호
• /
• pp.28-35
• /
• 1989

The fatigue crack growth behavior in GTA butt welded joints of Al-Alloy 5052-H38 was examined using Single Edge Notched(SEN) specimens. It is well known that welding residual stress has marked influence on fatigue crack growth rate in welded structure. In the general area of fatigue crack growth in the presence of residual stress, it is noted that the correction of stress intensity factor (K) to account for residual stress is important for the determination of both stress intensity factor range(.DELTA.K) and stress ratio(R) during a loading cycle. The crack growth rate(da/dN) in welded joints were correlated with the effective stress intensity factor range(.DELTA.Keff) which was estimated by superposition of the respective stress intensity factors for the residual stress field and for the applied stress. However, redistribution of residual stress occurs during crack growth and its effect is not negligible. In this study, fatigue crack growth characteristics of the welded joints were examined by using superposition of redistributed residual stress and discussed in comparison with the results of the initial welding residual stress superposition.

• Advances in materials Research
• /
• 제6권3호
• /
• pp.279-301
• /
• 2017

Thermo-mechanical vibration characteristics of in homogeneousporous functionally graded (FG) micro/nanobeam subjected to various types of thermal loadings are investigated in the present paper based on modified couple stress theory with consideration of the exact position of neutral axis. The FG micro/nanobeam is modeled via a refined hyperbolic beam theory in which shear deformation effect is verified needless of shear correction factor. A modified power-law distribution which contains porosity volume fraction is used to describe the graded material properties of FG micro/nanobeam. Temperature field has uniform, linear and nonlinear distributions across the thickness. The governing equations and the related boundary conditions are derived by Extended Hamilton's principle and they are solved applying an analytical solution which satisfies various boundary conditions. A comparison study is performed to verify the present formulation with the known data in the literature and a good agreement is observed. The parametric study covered in this paper includes several parameters such as thermal loadings, porosity volume fraction, power-law exponents, slenderness ratio, scale parameter and various boundary conditions on natural frequencies of porous FG micro/nanobeams in detail.

• 한국임상수의학회지
• /
• 제35권1호
• /
• pp.10-12
• /
• 2018

Mitral regurgitation is the most frequent cause of cardiac disability and death in dogs. A wide range of medical and surgical treatments have been used for mitral regurgitation. Surgical treatments for complete correction of mitral regurgitation include valve repair and valve replacement, which have the advantages of eliminating or correcting the primary cause. Surgical treatments approach the mitral valve via right- or left-side thoracotomy. Aortic root exposure is needed for cardiopulmonary bypass. To compare right-side and left-side approaches, 10 dog cadavers were used in this study. Subsequently, the left-side surgical approach was used in vivo and in conjunction with cardiopulmonary bypass and cardioplegic arrest. Based on the results, and considering ease of access to the aortic root, valve incision site, and visualization of the surgical field, a left-side approach is recommended.