• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.1
• /
• pp.93-101
• /
• 2008

It is difficult for a MWR(Missile Warning Radar) to perform a threat decision accurately since there is no tracking part which gives more accurate threat information to the MWR. In this paper, the threat decision algorithm is proposed using an azimuth angular rate to improve the accuracy. The azimuth angular rate is dependent upon the direction of an approaching target. The target is classified into a threat or non-threat using a boundary condition of the azimuth angular rate. The boundary condition is determined using the Monte-Carlo simulation. The performance of the proposed algorithm is evaluated using this condition at field tests of MWR. The efficiency of the proposed method for the threat decision is proved by comparing the results of field tests with the simulation results.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.88-89
• /
• 1991

For the micro-lithography using a KrF excimer laser beam(λ=0.248${\mu}{\textrm}{m}$) a mirror system consisting of four spherical surfaces with reduction magnification 5$\times$ is designed. Initially the aplanat condition of the mirror system is considered. And for the further improved performance of the system the distortion free condition and flat field condition within Seidel 3rd order aberrations are added to the above condition. During the process of designing the computer-aided optimization technique is extensively employed. The spherical aberration, coma, field curvature and distortion of the optimized four-spherical mirror system are removed to the diffraction limit, and residual astigmatism and off-axial vignetting are not corrected enough.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.8
• /
• pp.17-23
• /
• 1999

This paper presents the characteristics of the gas flow in the engine cylinder under various intake flow conditins. The particle tracking velovimetry(PTV) was used to anlayze the gas flow pattern and flow field in the cylinder. Effects of tumble intensifying valve(TIV), swirl intensifying valve(SIV) and one-valve deactivated condition on in-cylinder flow patterns were compared with the baseline engine udner 600rpm motoring condition. In addtion, tumbel ration was estimated rwith results of in -cylinder flow fields. Base on experimental results, the tumble ration of in-cylinder flow field has the maximum value at the bottom dead center for the different four inlet conditions. In TIV condition, the tumble ration is 1.35 times larger than that of baseline engine and 1 intake valve deactivated condition is effective to improve in-cylinder swirl motion.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1323-1328
• /
• 2001

The theory of NAH is based on the assumption of reflection free. However, it is not always possible to meet this condition in many practical cases. Thus, a decomposition of direct and reflected fields is needed to apply NAH to reflective condition for noise problems. In addition, the decomposition of direct and reflected field can give acoustic characteristics of reflecting surfaces. This paper presents that in this condition the decomposition can also be successfully done by MUSIC(Multiple Signal Classification) power method and beamforming method, and that numerical simulation and real experiments verify its performance.

• The Journal of Economics, Marketing and Management
• /
• v.7 no.1
• /
• pp.39-50
• /
• 2019

Purpose - The article views the theoretical basis of adaptation concentric matrix models in the analysis of the financial condition of the organization. Presented the elements counting procedures in the assessment of economic stability. Research design, data, and Methodology - Used the economic indicates in the concentric matrix models. The article views the specific using the concentric matrix models in the analysis of the financial condition of the organization. Results - The concentric matrix models can be adaptation to the analysis of financial conditions of organizations and to the comparative analysis. In the process of analysis of economic stability can be used "a field of efficiency". The classical variant of methods is transformed. The detailed assessment of influence of individual factors defined the additional methods. Conclusions - In the article the methods are demonstrated on the material of organization (Hyundai Elevator Co, China Communications Construction Company).

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2004.11a
• /
• pp.261-268
• /
• 2004

For cam and roller-follower contacting surfaces, the effect of tangential loading on the subsurface stress field at an elaso-hydrodynamic lubrication condition has been studied numerically. As tangential load increases, the subsurface stress field extended more widely to the direction of the tangential load. The positions of the maximum shear stress and the maximum effective stress are getting closer to the surface with the increasing tangential load. The tangential load at the elasto-hydrodynamic lubrication condition is of little consequence to the subsurface stress field.

• Bulletin of the Korean Mathematical Society
• /
• v.51 no.4
• /
• pp.1087-1100
• /
• 2014

We present an accurate and efficient numerical method for solving the Black-Scholes equation. The method uses an adaptive grid technique which is based on a far-field boundary position and the Peclet condition. We present the algorithm for the automatic adaptive grid generation: First, we determine a priori suitable far-field boundary location using the mathematical model parameters. Second, generate the uniform fine grid around the non-smooth point of the payoff and a non-uniform grid in the remaining regions. Numerical tests are presented to demonstrate the accuracy and efficiency of the proposed method. The results show that the computational time is reduced substantially with the accuracy being maintained.

• Journal of Mechanical Science and Technology
• /
• v.19 no.11
• /
• pp.1967-1974
• /
• 2005

The subsurface stress field caused by both normal loads and tangential loads has been evaluated using the rectangular patch solution. The effect of tangential loading on the subsurface stress field has been investigated in detail for both the cylinder-on-cylinder contact and a spur gear teeth contact. For the cylinder-on-cylinder contact, the subsurface stress fields are moved more to the direction of tangential loads and the positions where the maximum stress occur are getting closer to the surface with the increasing tangential loads. The subsurface stress fields of the gear teeth contact are expanded more widely to the direction of tangential loads with the increasing tangential loads. The friction coefficient of a gear teeth contact is low because they are operated in a lubricated condition, and therefore surface tractions in the EHL condition hardly affect on the subsurface stress field.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1992.10a
• /
• pp.121-130
• /
• 1992

Assessement of comsolidation characteristics of soft soil is very important in the project of soft soil improvement. In the design step, the consolidation characteristics of soil is determined by the laboratory tests (typically oedometer test), generally. But there is big differences between the condition of laboratory test and the condition of field(in situ). the differences results in the considerable difference between the predicted and measured consolidation behavior. This article analyzed the consolidation data of the "SOFT SOIL IMPROVEMENT PROJECT of the 2nd Namdong Industrial Complex at Inchon". The project was improving the road way net work in the 2nd Namdong Industrial Complex by preloading and sand pile method. Field instrumentation was performed at 10 points which consist of pneumatic piezometers, magnetic probe extensometers, inclinometers and electronic dipmeter. The results showed that there is big difference in the laboratory predicted consolidation behavior and field consolidadion behavior. Also there was big difference in the settlement behavior and pore pressure behavior. This article investigated the above factors by comparing the settlement, pore pressure and strength at different conditions.onditions.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.70-75
• /
• 2002

It is generally applied constraint welding condition to structure manufacture in the industry field. But it is thinkable that the residual stress of the construction and specimens for experiment is different because not constraint welding but non-constraint welding are applied for experiment. To apply the constraint welding condition as the industry field and compare and evaluate the welding residual stress distribution, the TlG welding of the pure titanium was carried out under constraint and non-constraint welding conditions