• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.1
• /
• pp.93-104
• /
• 2019

This study examined the relationship between the number of medical technologists and the medical test count. Data was obtained from 441 medical technologists in a hospital through a self-reported questionnaire. The Pearson correlation test, student's t-test, ANOVA or descriptive statistics were performed for data analysis. The distribution of medical technologist according to the size of hospitals was small 5.8, medium 14.9, large 25.8, and super 45.4. The analysis demonstrated a relationship between the number of medical technologists and the number of medical tests in the field, number of clinical tests per MT, and number of optimal medical test per MT according to the hospital size (P<0.001). The average time for quality control by the department at a higher hospital was less than two hours. In terms of the satisfaction of salary, work environment, test accomplishment, and welfare service, the dissatisfaction of medical technologists in small and medium hospitals was higher than those in large and super hospitals. Overall, a focus on intensifying systemic supplementation and improving the condition of medical technologists is needed to provide reliable data for medical examinations in medical areas.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.67-74
• /
• 2019

In this paper the response factor is investigated for middle and small size-RC slab aged bridges. The response factor consists of static and dynamic response factors and is a main parameter in the frequency based-bridge load carrying capacity prediction model. Static and dynamic response factors are determined based on the frequency variation and the impact factor variation respectively between current and previous (or design) states of bridges. Here, the impact factor variation is figured out using the impact factor response spectrum which provides the impact factor according to the natural frequency of bridges. In this study, four actual RC slab bridges aged over 30 years after construction are considered and their span length is 12m. The dynamic loading test in field using a dump truck and eigenvalue analysis with FE models are conducted to identify the current and previous (or design) state-natural frequencies of the bridges, respectively. For more realistic considerations in the moving loading situation, the impact factor response spectrum is developed based on tri-axle moving loads representing the dump truck load distribution and various supporting conditions such as simply supported and both ends fixed conditions. From the results, the response factor is widely ranged from 0.21to 0.91, showing that the static response factor contributes significantly on the results while the dynamic response factor has a small effect on the result. Compared to the results obtained from the impact factor response spectrum based on the single axle-simply supported condition, the maximum percentage difference of the response factors is below 3.2% only.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.103-110
• /
• 2019

Damage to the pavement system due to various causes will be required rapid repair work for reopening the vehicle traffic. The magnesium oxide phosphate composite(MPC) has a short curing time and is capable of early compressive strength development, is suitable for rapid repair materials. The aim of this study was to evaluate the hardening and compressive strength characteristics of MPC according to the water-binder (W / B) ratio and magnesium-phosphate(M / P) ratio in order to develop repair materials consisted with light burned magnesia and potassium dihydrogen phosphate. In order to ensure the workability in the field application, the difference of mechanical properties according to standard sand and ordinary sand and performance of retards were evaluated. The mix proportion with W/B ratio was about 35% and the M/P ratio was about 1.0 ~ 1.2 has a superior perfomance with strength and hardening condition. Especially, the strength of composite at only 1 day curing with W/B ratio of 0.35 and the M/P ratio of 1.2 was shown the higher than 25.0 MPa. Boric acid as a retarder was found to be suitable for ensuring the working time, and the purity of magnesium oxide was about 90 ~ 95%, which is effective for ensuring curing time and strength.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.75-83
• /
• 2019

In this study, to propose the deterioration curves of urethane, ceramic, polysiloxane and fluorocarbon coating for the steel bridge, an accelerated corrosion tests were carried out. The each coating system wes applied on the top of the specimens, and circular initial defects were introduced with different diameters with 0.5, 1.0, 3.0, 5.0 mm. An accelerated corrosion test condition was used to simulate severe corrosive environment depending on ISO 20340. The deterioration curve of each coating type was evaluated based on deteriorated area from the circular defects. In order to evaluate the coating service life of installed steel bridge using deterioration curve, the acceleration coefficient was calculated at correlation between ISO 20340 and corrosivity categories by ISO 9223 based on field corrosion rate. From test results, the propagation rate of coating deterioration area was different to diameter of circular defects. In case of urethane coating, the coating service lifes of 3% deterioration area was evaluated in 31.8, 15.8, 9.9 and 3.9 years with C2, C3, C4 and C5 category.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.5
• /
• pp.621-640
• /
• 2019

Quantitative stability assessment of underground cavities can be presented as a factor of safety based on the Shear Strength Reduction Method (SSRM). Also, SSRM is one of the stability evaluation methods commonly used in slope stability analysis. However, there is a lack of research that considers the relationship between the probability of occurrence of cavities in the ground and the potential failure surface of the slope at the same time. In this study, the effect of small underground cavities on the failure behavior of the slope was analyzed by using SSRM. Considering some of the glaciology studies, there is a case that suggests that there is a cavity effect inside the glacier in the condition that the glacier slides. In this study, the stability evaluation of underground cavities and slope stability analysis, where SSRM is used in geotechnical engineering field, was carried out considering simultaneous conditions. The slope stability analysis according to the shape and position change of underground cavities which are likely to occur in the lower part of a mountain road was analyzed by using SSRM in FLAC3D software and the influence of underground cavities on the slope factor of safety was confirmed. If there are underground cavities near slope potential failure surface, it will affect the calculation of a factor of safety. The results of this study are expected to be basic data on slope stability analysis with small underground cavities.

• Journal of Arbitration Studies
• /
• v.28 no.4
• /
• pp.3-42
• /
• 2018

This paper aims to explore ways to develop the arbitration industry in Korea. The prospects for the promotion of the arbitration industry in Korea are never dim. International arbitration competitiveness is somewhat lower than its competitors at present, but the international economic base to support it is solid, and the domestic arbitration environment seems to be sufficient to support the development possibility of arbitration. Since geographical and economic factors have already been defined, Korea must at least improve the arbitration act with passion and vision for the best one. The arbitration act that is the most accessible to arbitration consumers is the best arbitration act. The important thing is to have an arbitration act that makes people want to use more than litigation or other dispute resolution procedures. There is no hope of remaining as a "second mover" in the field of arbitration law. One should have a will and ambition to become a "first mover" even if it is risky. Considering the situation of the current arbitration law, it is necessary to start an arbitration appeal system in order to become a consumer-friendly arbitration law, and it is necessary to examine ways of integrating the grant of execution clause and enforcement application procedures. The abolition of the condition of Article 35 of the Arbitration Act, which rules the validity of the arbitration award, will help promote international arbitration. Exclusion agreements of setting aside against arbitration awards must also be fully recognized. It is also important to publish a widely cited international arbitration journal. In order to respond to the fourth industrial revolution era, it is necessary to support the establishment of a dispute resolution system that utilizes IT technology. In order to actively engage the arbitrators in the market, it is necessary to abolish the regulations that exist in the Attorneys-at-Law Act. There is also a need to allocate more budget to educate arbitration consumers and to establish arbitration training centers to strengthen domestic arbitration education. It is also necessary to evaluate and verify the Arbitration Promotion Act so that it can achieve results. In the international arbitration market, competition is fierce and competitors are already taking the initiative, so in order not to miss the timing, Korea needs to activate international arbitration first. In order to activate international arbitration, the arbitration body needs to be managed with the same mobility and strategy as the agency in the marketplace. In Korea, unlike in Singapore and Hong Kong, it is necessary to recognize that the size of the domestic arbitration market is very likely to increase sharply due to the economic size of the country and the large market potential it can bring from litigation. In order to promote the arbitration industry, what is most important is to make arbitration activities in accordance with the principles of the market and to establish an institutional basis to enable competition. It is urgently required to change the perception of the relevant government departments and arbitration officials.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.107-119
• /
• 2019

As the development of ICT and integration technology, many changes and innovations in agriculture field are implemented. The agricultural sector has shifted from a traditional industry to a new industrial form called the 6th industry combined with various advanced technologies such as ICT and IT. Various approaches have been attempted to analyze and predict crops based on spatial information. In particular, a variety of research has been carried out recently for crop cultivation and smart farms using drones. The goal of this study was to establish an agricultural drought monitoring system using drones to produce scientific and objective indicators of drought. A soil moisture sensor was installed in the drought area and checked the actual soil moisture. The soil moisture data was used by the reference value to compare and analyze the temperature and NDVI established by drones. The soil temperature by the drone thermal image sensor and the NDVI by the drone hyperspectral was analyzed the correlation between crop condition and soil moisture in study area. To verify this, the actual soil moisture was calculated using the soil moisture measurement sensor installed in the target area and compared with the drone performance. This study using drone drought monitoring system may enhance to promote the crop data and to save time and economy.

• Korean Journal of Community Nutrition
• /
• v.24 no.1
• /
• pp.60-76
• /
• 2019

Objectives: The purpose of this study was to develop a systematic and standardized "The Survey on School Foodservice Program" that can identify the current status of school meals on the nationwide level. Methods: This study was carried out in six steps of the analysis of report/investigation data related to school foodservice in metropolitan and provincial offices of education, analysis of preceding research related to the actual status of school foodservice, field verification of the actual condition of the school foodservice site, development of a draft of "The Survey on School Foodservice Program", pilot study of a draft of "The Survey on School Foodservice Program", and suggestions of a final model of "The Survey on School Foodservice Program" from August to December, 2017. Statistical analysis was performed for frequency analysis and descriptive analysis using the SPSS program ver. 23. Results: A draft of "The Survey on School Foodservice Program" was developed by analyzing the current status of report/research data on school meals in metropolitan and provincial offices of education, analyzing the preceding research on school meals, and identifying the actual conditions at school foodservice sites. To verify the validity of the school foodservice survey questionnaire, 1,031 schools were sampled from a total of 10,251 schools and the pilot test of '2017 School Foodservice Survey' was conducted. The final model of "The Survey on School Foodservice Program" consisted of 12 survey sections, 29 survey categories, and 433 survey items, and the survey cycle was set for one year and three years for each survey item. Conclusions: Based on the objective statistical data through "The Survey on School Foodservice Program", it is possible to develop the school foodservice policy, which will help establish the reliability of the school meals.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.205-211
• /
• 2019

Over the past several decades, the polymer dispersed liquid crystal (PDLC) has received particular attention as a material for developing smart window due to their electro-optical switchable properties. In this study, PDLC cells were fabricated using acrylate monomers, namely 2-hydroxyethyl acrylate (2-HEA) and ethylene glycol phenyl ether acrylate (EGPA), and the effect of the monomer composition on their electro-optical properties was investigated. The monomer mixture with a low viscosity (~10 cps) was easily filled between indium tin oxide (ITO) glasses by capillary action at room temperature. PDLC cells prepared using the mixture ratio of 1 : 9 (2-HEA : EGPA) did not show a complete opaque state at a 0 V condition but exhibited unstable electro-optical properties under an electric field. As the LC composition increased in the reaction mixture for PDLC cell preparation, the $V_{th}$ (threshold voltage) and $V_{sat}$ (saturation voltage) values as well as contrast ratio (CR) increased. $V_{th}$ and $V_{sat}$ values also increased with the cell gap thickness. PDLC cells with a $20{\mu}m$ cell gap thickness exhibited higher CR than those with 10 and $40{\mu}m$ cell gap thicknesses. Particularly, PDLC cells prepared using the mixture ratio of 7 : 3 (2-HEA : EGPA) showed excellent electro-optical properties such as a low driving voltage and high contrast ratio.

• Korean Journal of Materials Research
• /
• v.29 no.11
• /
• pp.727-733
• /
• 2019

In this study, the glass melting properties are evaluated to examine the possibility of using refused coal ore as replacement for ceramic materials. To fabricate the glass, refused coal ore with calcium carbonate and sodium carbonate in it (which are added as supplementary materials) is put into an alumina crucible, melted at $1,200{\sim}1,500^{\circ}C$ for 1 hr, and then annealed at $600^{\circ}C$ for 2 hrs. We fabricate a black colored glass. The properties of the glass are measured by XRD (X-ray diffractometry) and TG-DTA (thermogravimetry-differential thermal analysis). Glass samples manufactured at more than $1,300^{\circ}C$ with more than 60 % of refused coal ore are found by XRD to be non-crystalline in nature. In the case of the glass sample with 40 % of refused coal ore, from the sample melted at $1,200^{\circ}C$, a sodium aluminum phosphate peak, a disodium calcium silicate peak, and an unknown peak are observed. On the other hand, in the sample melted at $1,300^{\circ}C$, only the sodium aluminum phosphate peak and unknown peak are observed. And, peak changes that affect crystallization of the glass according to melting temperature are found. Therefore, it is concluded that glass with refused coal ore has good melting conditions at more than $1,200^{\circ}C$ and so can be applied to the construction field for materials such as glass tile, foamed glass panels, etc.