• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.337-337
• /
• 2017

Accurate and optimal water supply to cereal crop is critical in growing stalks and producing maximum yields. Excessive soil moisture may cause nutrient deficiencies and oxygen deficiency. Excessive soil water during crop growth stages results in decrease of yields. In Korea, the largest agricultural lands are paddy fields. Recently, upland crops are cultivated in paddy field soils to reduce overproduced rice in Korea. In order to success this policy, it is necessary to fully understand crop response to excessive soil moisture condition from paddy field soils. Adzuki bean is one of major legumes which provide protein in daily diet. Adzuki bean has been well know its weakness to excessive soil moisture condition, In order to obtain optimal yields of adzuki bean from paddy field cultivation, it is necessary to understand response of adzuki bean under different soil moisture conditions. This study investigated characteristics of growths, yields and response degree of water stress from adzuki bean. Three cultivars were selected for this study; Chungju, Hongeon, and Arari. All adzuki beans were cultivated in a paddy field which was divided into three sections with different soil moistures. The paddy field was located in Milyang, Gyeongsangnam during 2016. One section of the paddy field had the greatest average soil moisture content as 35.1% during adzuki bean cultivation (very poor). The second greatest soil moisture section had 32.6% (somewhat poor) and the smallest soil moisture section had 28.9% of soil moisture (somewhat well). During cultivation of three cultivar adzuki beans, soil moisture contents and groundwater levels were monitored. All the characteristics of growth and yield components were measured; height, thickness, 100 seed weights etc. Stress index values were calculated by Stress Day Index (SDI). All cultivars had the greatest yields from somewhat well section. Chungju had the greatest yields throughout all three sections compared to other cultivars. Chungju had 81% greater yield than Hongeon which had the smallest yield from somewhat well section. Arari set in middle from all sections. However there was no significant differences yields from very poor and somewhat poor sections. Leaf SPAD values tended to decrease and stable carbon isotope values increased as soil moisture increased. However, Chungju had no difference across different soil moistures in SPAD and stable carbon isotope values, while Hongeon had the greatest differences across sections. These trends followed by SDI values. Chungju had the smallest SDI values compared to other cultivars, which meant that Chungju was the strongest tolerance against excessive soil moisture than other cultivars. All three cultivars showed severe decrease of yields from very poor and somewhat poor sections. Arari and Hongeon showed great decrease from somewhat well section compared to yields from upland soil. These two cultivars may not be proper cultivating in paddy fields. In conclusion, adzuki bean is very sensitive to soil moisture condition and detailed soil managements are required to obtain optimal yields of adzuki bean from paddy field cultivation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.27 no.4
• /
• pp.263-268
• /
• 2007

This experiment was carried out to evaluate the effects of organic content and to select lodging resistance for six varieties in paddy field of Chungnam province from 2006 to 2007. In this experiment, plant height was increased at the high fertile field and dry matter rate (%) per fresh matter was decreased at the high fertile soil condition but dry matter rate (%) of spike was increased. The dry matter (DM) yield showed higher in Sunwoo barley (13,520kg/ha) and Youngyang barley (12,780kg/ha) at the high fertile field. Fresh yield was also high in Wooho barely (34,720kg/ha) and Youngyang barely (33,670kg/ha) at the high fertile field but yield in high and normal fertile soil condition was not difference. Total digestible nutrients (TDN) content of Youngyang barley and Yuyeon barley was high as 69.5%, 70.3%, respectively, at the high fertile soil condition. According to this result Soman barley and Youngyang barley might be recommendable for whole crop barely in lower organic content condition of paddy rice field and Wooho barley and Soman barley with the lodging resistance and high yield is suitable for paddy field with high organic content.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.3
• /
• pp.5-8
• /
• 2012

Superconducting windings of synchronous machine have to be operated in below the critical temperature, critical current density and critical magnetic field. If one of these characteristics does not satisfied, then the quench occurred in superconducting winding. Especially the armature current dramatically increased as the superconducting generator is short-circuited at the rated load condition and magnetic field in field winding increased due to the armature current. Therefore, damper is required to reduce the magnetic field of field winding which increases reliability of the superconducting generator. Damper dimension can be decided by time constant[1-2]. In this paper the basic model is high-power and low-speed superconducting generator. Damper time constant was calculated from the changed damper thickness and material. Magnetic flux of field coil at the basic model and changed damper time constant model is analyzed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.730-734
• /
• 2003

A beamforming method is a kind of spatial filter that focus the amy's signal capturing abilities in a desired direction. In this paper, we detect the location of a source under reflective condition using the multi-dimensional MUSIC algorithm then, we can iud the image source locations from the experimental geometry, and we reconstruct the partial fields for direct wave and reflected wave by using Adaptive nulling algorithm. Numerical simulations are performed to verify its performance under various conditions.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.791-796
• /
• 2003

Some basic guidelines for changing non-uniform boundary condition in an acoustically small cavity are presented. In this paper, modal summation technique is used to represent inside sound field. From this formulation, corner effect is defined and proposed. The corner in a cavity is good position for changing boundary condition effectively. Impedance circle with same absorption coefficient is defined to find appropriate impedance of absorptive material for better noise control performance.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.4
• /
• pp.67-71
• /
• 2012

This study analyzed performance changes by an inner flow path of impeller groove for side channel type ring blower using CFD. Two models have the same side channel and clearance while one has an inner flow path and the other doesn't. To analyze the performance change of a ring blower, overall performance and local flow field were analyzed. For the overall performance, pressure increase and impeller torque were checked under the design flow condition. Under the design flow condition, pressure increase was greater for the model with the inner flow path. The model with the inner flow path showed improved efficiency because the area subject to torque decreased due to the creation of inner flow path. To analyze local flow field, a section was created from the representative location of each impeller groove toward the direction of radius. Inner channel pressure distribution depending on the rotation direction shows that the model with the inner flow path has pressure equilibrium of working fluid through the inner flow path. Velocity distribution of inside impeller groove shows that flow field was coupled and appeared to form an inner wall where the flow field was stabilized.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.132-138
• /
• 2007

Carbon nanotubes (CNTs) arc grown on Ni catalysts employing an inductively-coupled plasma chemical vapor deposition (ICP-CVD) method. The structural and field-emissive properties of the CNTs grown are characterized in terms of the substrate-bias applied. Characterization using the various techniques, such as field-omission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), Auger spectroscopy (AES), and Raman spectroscopy, shows that the structural properties of the CNTs, including their physical dimensions and crystal qualities, as well as the nature of vertical growth, are strongly dependent upon the application of substrate bias during CNT growth. It is for the first time observed that the provailing growth mechanism of CNTs, which is either due to tip-driven growth or based-on-catalyst growth, may be influenced by substrate biasing. It is also seen that negatively substrate-biasing would promote the vertical-alignment of the CNTs grown, compared to positively substrate-biasing. However, the CNTs grown under the positively-biased condition display a higher electron-emission capability than those grown under the negatively-biased condition or without any bias applied.

• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.105-110
• /
• 2006

Many previous works have been performed to provide correlations of flame length, theoretically and experimentally. Most of these results studied were conducted in vertical turbulent flame with no coaxial air condition. The present study analyzes the flame length scaling with coaxial air. In turbulent hydrogen non-premixed jet flames with coaxial air, flame length scaling theoretically proposed so far has been related with the concept of a far-field equivalent source. At high coaxial air to fuel velocity ratio, $U_A/U_F$, however, this scaling theory has some difference with experimental flame length data. This difference is understood to be due to the fact that the theory is based on far-field notion, while the effect of coaxial air on jet flame occurs in the region near the nozzle exit. Therefore, we define effective jet density $P_{eff}$ involving the concept of near-field so that effective jet diameter can be extended to the near-field region. In this condition, we modify the correlation and compare with experimental data.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.36 no.2
• /
• pp.123-131
• /
• 1994

Experimental studies were conducted to make clear the soil moisture environment under the condition of paddy-upland rotational fields by investigating water-table depths and soil moisture contents during growing season of crops in two kinds of soil. The following results were obtained. 1.Although water-table depths fluctuated with the amount of rainfall in the experimental field, it seemed that the variation of vater4able depths in the paddy-upland rotational, field was strongly affected by the condition of locations on paddy fields. 2.It is recognized that the concept of sum of excess water depth(SEWxx) and sum of excess water day(SEDxx) can be used to represent the soil moisture stress index due to the fluctuation of water-table depths. 3.The results of this study clearly indicate that drainage in paddy-upland rotational field to maintain an optimum soil moisture content must be made by introducing the concept of block drainage which needs both subsurface drainage and intercept drainage around a field. 4.Soil moisture contents were affected by both the amount of rainfall and water-table depths, however, the moisture content for top soil showed higher correlation with the amount of rainfall while that for subsoil with water-table depths.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.44-47
• /
• 2003

In this paper, the electric field distribution in dielectric tube with one layer and spherical dielectric($ZrO_2$) in water was simulated. The reactor was made up of the spherical dielectric that is diameter : 3.0[mm], $ZrO_2(\varepsilon_r:10)$ and one glass plate of thickness(2[mm]), $\varepsilon_r$(10) as electrode. The discharge gap was 8[mm]. To get more strong electric field, the dielectric constant should be higher comparatively. Using the spherical dielectric for water discharge in dielectric tube, the location of equipotential line was shifting from the interior to the exterior. At real water discharge experimental, ozone was measured higher dissolved ozone in water at condition of water rate(l[l/min]) and injector than condition of non-injector or 2~3[l/min].