• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.1
• /
• pp.114-120
• /
• 2017

In recent years, applications of high speed rotating bodies have diversified. It is necessary for a device rotating at high speed to be balanced to minimize vibration. It is necessary to reduce the unbalancing factor to evenly wind the yarn. In this study, we also attempted to devise a technique to minimize the unbalance that occurs while assembling the components of spindles and to simplify the balancing procedure in the field. To balance the spindle, the vibration of the rotating spindle was measured using a laser displacement meter. We also performed balancing using the influence coefficient method by considering the phase.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.12 no.4
• /
• pp.15-20
• /
• 2016

Even though the control device of the heating system works well, insufficient water flow rates can degrade control performance and thermal comfort. The water flow rate should be adjusted appropriately to cope with the heating load of each zone. In order to solve these problems, a new balancing concept 'dynamic balancing' was proposed where a balancing valve opening can be automatically modulated according to the heating condition of the room. This study analyzed the effects of dynamic balancing upon indoor thermal environment and energy consumption in a radiant floor heating system through field measurement. Under part-load conditions, the use of a dynamic balancing is a more effective method to reduce energy consumption and to prevent a cavitation. Dynamic balancing is able to help boost the temperature of a room in the start-up period.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.314-320
• /
• 2014

Field balancing is required in any kind of phase information for the determination location balancing mass toward a rotor unbalance mass. Phase or phase angle is a measurement of the relationship of how one vibration signal which relates to another vibration signal and is commonly used to calculate the placement of balance weight. In this paper, A right guideline shows the photo optical speed sensor as the external keyphasor is a very useful when diagnosing machinery vibration problems on considering a phase lag comparing to the laser optical speed sensor. Some experimental results generate the interesting phase errors when appling to a wrong conditions. So, Usage of photo optical speed sensor which is used primarily to measure the shaft rotating speed serves as a reference for measuring vibration phase information has effect on the placement of phase angle how it was misunderstood. This paper will help a right method to search for the position of balancing weight and serves as baseline for further measurements using low cost and much easier user convenience. It is concluded that the propose baseline is likely to be applicable to apply to the practical field balancing weight.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.2
• /
• pp.101-107
• /
• 2015

Field balancing is required in any kind of phase information for the determination location balancing mass toward a rotor unbalance mass. Phase or phase angle is a measurement of the relationship of how one vibration signal which relates to another vibration signal and is commonly used to calculate the placement of balance weight. In this paper, A right guideline shows the photo optical speed sensor as the external KeyPhasor is a very useful when diagnosing machinery vibration problems on considering a phase lag comparing to the laser optical speed sensor. Some experimental results generate the interesting phase errors when appling to a wrong conditions. So, Usage of photo optical speed sensor which is used primarily to measure the shaft rotating speed serves as a reference for measuring vibration phase information has effect on the placement of phase angle how it was misunderstood. This paper will help a right method to search for the position of balancing weight and serves as baseline for further measurements using low cost and much easier user convenience. It is concluded that the propose baseline is likely to be applicable to apply to the practical field balancing weight.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.219-220
• /
• 2010

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.1026-1034
• /
• 1988

An efficient method for designing balancing springs to be used for dynamic balancing of planar mechanisms was studied. In spite of its wide application in the field of balancing problems such as balancing of input torques, clearance effects etc., there have been few efficient ways of determining the specifications of the balancing springs. To improve this problem, a method of approximating the characteristic of linear springs was suggested and its validity was checked through an analysis of errors. Further, through an example of a balancing problem to reduce the fluctuation of input torques of a 4bar mechanism, it was shown that the proposed method of approximation simplifies the design equations and a satisfactory result can be found efficiently.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.6
• /
• pp.1819-1826
• /
• 1996

This paper present the claculating method of optimum correction mass within permissible vibration linits for ratating machinery in two-plane field balancing. Basic technique of this method is based on influence coefficient method, and grphic vector composition that the resultant of two influence vectors obtained by trial mass have to be equilibrium with initial vibration vector in the each correction plane. Genetic algorithm which is a search algorithm based on the mechanism of natural selection and natural genetics is sued for vector composition, and SUMT method is used to objective function which seeks optimum correction mass for balancing a rotor.

• Journal of TMJ Balancing Medicine
• /
• v.8 no.1
• /
• pp.6-10
• /
• 2018

In order to propose a fundamental and appliable theories for balancing therapy of temporomandibular joint (TMBT), evolutionary proofs and up-down theories in evolutionary biology and Korean medicine were investigated. Balancing therapy of temporomandibular joint treats disorder and diseases of the whole body through straightening of the abnormal linking between temporomandibular joint and axis. Although the mechanism of this therapy contains many merits like multicellular integrity and coadjustment, ease of balance and alert forward mobility by the bipedal stepping and evolution to Homo sapiens, increasing disadvantages of balancing pressure of right and left in the lengthened perpendicular axis and the balancing load of temporomandibular joint and axis following the reactional change of dental occlusion are deeply related and considered in this therapy. As for up-down theory, crossing of heavenly qi and earth qi centering on cervical joint is presented as the first mechanism for TMBT, and the other ones like in-out and up-down qi activity of tripple energizer, up-down of essence-qi-spirit in the three backbone barrier and three cinnabar field, up-down of yin-yang-water-fire of viscera and bowels can be related too.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.249-250
• /
• 2008

In the field of mobile communications, load balancing between 3GPP LTE and other networks is expected to be an important topic from the perspective of current technical development. The load balancing technique includes the definition of functions and structures needed to incooperate 3G LTE E-Node B and base-stations designed for heterogeneous networks. The major goal attained from this paper is to ensure an algorithm for the mechanism of load balancing and to achieve a technical leading for the next generation mobile network.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.8
• /
• pp.48-53
• /
• 2001

In order to increase productivity and efficiency, high-speed rotating machines become popular these days. The high-speed rotating machine is likely to vibrate and cause machine failure even though it has small unbalance. Therefore, a balancing technique is studied in this paper. Off-line balancing methods are inadequate to solve unbalance vibration problem occurring in the field due to flexible rotor effect, faster tool change, and shorter spin-up and down, etc. An active balancing is suggested to allow re-balancing of the entire rotating assembly in the machine when a tool is changed. This paper shows how to identify the dynamics of the system using influence coefficient and suggest an active balancing technique based on influence coefficient method for high-speed spindle system.