• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1327-1331
• /
• 1990

A new dual loop controller using color LCD bar graphs with LED back lights has been developed. An optional memory card is used to load or save the controller configuration, which may be a preprogrammed standard package or a user-programmed configuration, in addition to the built-in functions ready for user selection. The bar-graph display is selectable for single-loop or dual-loop use. A high grade of self-tuning functions using a modeling technique is built-in as standard. The controller can accommodate optional plug-in modules for thermocouples, communication, etc. All the options are fully field upgradable.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.96-101
• /
• 2001

Recently, with the increasing of construction works, large construction equipment are used to reduce the term of work and labor cost in construction field. Therefore, construction equipment noise has caused much annoyance for a number of dweller in nearby construction field and it has become a very serious problem in our living environment. Neverthless, in our country, adequite guidelines for the construction equipment noise are very deficiency because of the lack of basic data and insufficient research works. From this point of view, this study attempts to survey the vertical SPL distribution of piling noise by oil pressure method in construction field. This study also present a basic data found a effective plans for piling noise by oil pressure method.

• Journal of the Korean Society of Safety
• /
• v.13 no.1
• /
• pp.139-146
• /
• 1998

In current domestic construction field, several factors influencing the safety for field workers are various due to the size and complexity of construction works involved. Among the factors, the age is the important one, because the average age of workers is getting older due to the 3D phenomena in construction fields. The safety for workers of all ages is important, but especially safety for the old, is more important. Thus, the fundamental techniques for placement of field workers with adequate safety corresponding to complexity and hard works are investigated through analyzing fatigue and heart rate of individual worker, especially for the old.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.500-505
• /
• 2000

Recently, with the increasing of construction works, large construction equipment are used to reduce the term of work and labor cost in construction field. Therefore, construction equipment noise has caused much annoyance for a number of dweller in nearby construction field and it has become a very serious problem in our living environment. Neverthless, in our country, adequite guidelines for the construction equipment noise are very deficiency because of the lack of basic data and insufficient research works. From this point of view, this study attempts to survey the characteristics of attenuation and propagation of Sand Drain Method in construction field. On the basis of measurement value, we analysed about prediction possibility of Sand Drain Method. This study also present a basic data found a effective plans for Sand Drain Method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.8
• /
• pp.1654-1660
• /
• 2004

In this paper, we describes the design and implementation of LonWorks communication module for distributed intelligent control using LonWorks technology of Echelon. LonWorks communication module can be divided hardware and firmware. First, hardwares is divided into microcontroller attaching sensors and LonWorks components for working together control network and data network. Hardwares are consisted of neuron chip, microcontroller, transceiver, LONCard. Second, operating firmware is realized with neuron C using NodeBulider 3.0 development tool. Produced and implemented LonWorks communication module is pretested using LTM-10A, Gizmo 4 I/O board, parallel I/O Interface. For field test, microcontroller module part is tested by HyperTerminal, communication procedure in data network is certified by transmitting and receiving short message using LonMaker for Windows tool. Herewith, LON technology is based on network communication technique using LonWorks.

• Geomechanics and Engineering
• /
• v.18 no.5
• /
• pp.527-534
• /
• 2019

Although ground investigation had carried out prior to the construction, many problems have arisen during the civil-engineering works because of the presence of the unexpected underground utility lines or anomalies. In this study, a new geophysical exploration method was developed to solve those problems by improving and supplementing the existing methods. This new method was based on the difference of electrical resistance values between anomalies and surrounding ground medium. A theoretical expression was suggested to define the characteristics of the anomalies such as location, size and direction, by applying the electric field analysis. An inverse analysis algorithm was also developed to solve the theoretical expression using the measured electrical resistance values which were generated by the voltage flowing the subsurface medium. To verify the developed method, field applications were conducted at the sites under construction or planned. From the results of the field tests, it was found that not only the new method was more predictive than the existing methods, but its results were good agreed with the measured ones. Therefore, it is expected that application of the new exploration method reduces the unexpected accidents caused by the underground uncertainties during the underground construction works.

• Korean Journal of Environment and Ecology
• /
• v.7 no.2
• /
• pp.207-212
• /
• 1994

The census of Amphibia fauna in Tokyusan National Park was carried out during April 10, 1993 and August 8 - August 9, 1993 at the areas of construction field of golf course in Muju Resort and the Chibong. There were 6 species of 5 genera on the 4 families, 2 orders of Amphibia in Tokyusan National Park including Hynobius leechii. Onychodactylus fischeri, and Bufo bufo gargarizans which were announced the specific wild animals with the object of conserving by The Ministry of Environment. At the area of construction field of golf course in Muju Resort, there were 5 species of Amphibia observed as Hynobius leechii, Bombina orientalis, Bufo bufo gargarizans, Rana nigromaculata, and Rana dybowskii. Onychodactylus fischeri and Rana dyhowskii were observed at the Chibong area. The Chibong inwhich was observed 9 relatively large number of individuals of Onychodactylus fischeri was revealed as an environmentally sound habitat to Onychodactylus fischeri. Whereas in the construction field of golf course, there were intended to diminishing species and population size rapidly by progress with construction works. Therefore the large construction works such as golf couse and ski slopes which were concerning to deteriorate the natural environment should be restrain in National Park for animal diversity conservative.

• Journal of architectural history
• /
• v.16 no.3
• /
• pp.115-131
• /
• 2007

Jeong Woo-tae(?-1809) was a military official who had worked as Byeol-Gan-Yeok in the governmental construction works during the late 18th century through the early 19th century. Byel-Gan-Yeok, literally a special technician, was an official post in the governmental construction works that carries specific technical tasks from the mid 18th century. Over 30 years, Jeong Woo-tae had devoted himself in the construction of various royal tombs, city walls, and palace buildings. He showed superb and various techniques in the works of stone carving and architectural details. After finishing the construction of the tomb of King Jeong-jo's father successfully, he was appointed as a governor of a rural town. Being on duty of the governor, he used to participate in the construction works as a technician. He also made a couple of innovative devices in the field of construction, like a carrying apparatus, Byel-Nok-No. His works secured the setting up of the post of Byel-Gan-Yeok in the governmental construction system in the 19th century. But his technical achievement remained as his own private works rather than developing to the universal growth of the craftsmen's skill. This might be a limitation of the Byel-gan-Yeok's role, whose position was remained in the midway between official and craftsman.

• Journal of the Korean Society of Safety
• /
• v.27 no.3
• /
• pp.131-140
• /
• 2012

Though there might exist not a few differences between cyclic works and atypical works, many researchers have applied the same assessment techniques that used for repetitive works, which may result introduce bias in their conclusions. This research aimed to verify whether there exist non-negligible work characteristics and/or dissimilarity among works with different work nature and whether one of the most prevalent assessment techniques for assessing ergonomic hazards of musculoskeletal disorders, REBA, can be applied to atypical works. For a general hospital, an automobile repair shop, and two auto-part assembly plants which manufactures quite different parts, a questionnaire survey and field investigation and ergonomic assessment were carried out and analyzed statistically with reference to the 3rd Quantification technique. The results showed that there exist remarkable difference between physical factors in cyclic works and atypical non-cyclic works. As for repetitive work, body posture was significant factors affecting on musculoskeletal disorders while atypical works seemed to have none which implied that the necessity of taking psychosocial factors into account for assessment of hazards. Complain rate in repetitive works was highest shoulder, back, and neck or wrist in sequence. However, there existed no consistent trend in complain rate in atypical works. And, though weight of manufacturing objects was a common factor that can partly explain musculoskeletal complain, time duration was significant in atypical work whereas repeatability and body posture were significant in repetitive works. As being the results, to summarize, it could be said that application of conventional ergonomic assessment techniques regardless of repetitiveness would be fruitless, and that the necessity of a unique methodology focused on atypical non-cyclic works should not be neglected.

• 수도
• /
• v.22 no.5 s.75
• /
• pp.76-92
• /
• 1995