• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.6
• /
• pp.1819-1826
• /
• 1996

This paper present the claculating method of optimum correction mass within permissible vibration linits for ratating machinery in two-plane field balancing. Basic technique of this method is based on influence coefficient method, and grphic vector composition that the resultant of two influence vectors obtained by trial mass have to be equilibrium with initial vibration vector in the each correction plane. Genetic algorithm which is a search algorithm based on the mechanism of natural selection and natural genetics is sued for vector composition, and SUMT method is used to objective function which seeks optimum correction mass for balancing a rotor.

• Plant Disease and Agriculture
• /
• v.1 no.1
• /
• pp.37-44
• /
• 1995

This study was carried out to select effective fungicides against white and violet root rot caused by Rosellinia necatrix and Helicobasidium mompa with nine fungicides including thiophanate-methyl from 1993 to 1994. Through laboratory, greenhouse and field trials on inhibitory effect of mycelial growth and disease incidence against the two fungal pathogens, 5 fungicides have been selected finally. Thiopanate-methyl, benomyl, iminoctadine-triacetate and isoprothiolane were proven to have high control effect against R. necatrix. In addition to thiopanate-methyl and benomyl, tolclofos-methyl has been selected for effective control of H. mompa, since it showed prominent control effect in field trial than in laboratory or green house test.

• The Korean Journal of Applied Statistics
• /
• v.10 no.1
• /
• pp.15-27
• /
• 1997

Randomized block design (RBD) with three replication is very frequently adopted in agricultural experiments of the Rural Development Administration of Korea. Even though it works well in field trials of traditional crops, it may not accomodate trial site conditions and/or experimental environment. In this research report, we deal with two such cases. The first case is for a crop experiment in green houses. In house conditions, RBD may not be appropriate since it cannot reflect two directions of the yield gradient. So, a Latin square design is suggested as an alternative. The second case is for local field experiments of the newly-inbred rice. RBD with three replications is used without doubt for decades, even though the site layout is not appropriately shaped for the design. In this case, we suggest the RBD in two blocks with multiple replicates for control varieties as an alternative. To improve the quality of statistical experimental designs in over one-thousand agricultural trials performed annually in the Rural Development Administration, we need to re-train agricultural researchers on the design and analysis of experiments and call for concerns of Korean statisticians.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.667-671
• /
• 2004

The purpose of this paper is to study on the construction of environmentally friendly roadbed by reinforcing type soil solidification agent. The soil amendment agent used in this study is friendly to the environment, and has a function of soil-cement-agent solidification. The soil amendment agent was admixed with reinforced fiber material for enhancement of strength and durability of roadbed. The project of trial field test of roadbed construction with special reinforcing soil treatment agent was performed in Gyunggido on December 2003. A series of field and laboratory experiments including unconfined compressive strength, permeability were carried out to investigate the physical and mechanical characteristics of solidified roadbed treated by this reinforced solidifying agent. The results of this research showed that the roadbed using normal and poor soil could be efficiently constructed by treatment of this reinforcing type solidification agent admixed with fiber material.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.703-707
• /
• 1997

DUe to the requirement of high precision and the complexity during the tool design for electron gun elements, it sometimes causes human-errors. Also, in the case of beginners, they have more trial and error than skilled engineers. To remove these problems and increase the productivity in the practice field, it need the deveiopment of CAD system for electron gun element tools. Through this study, a CAD system of electron gun element tools which is used by used by knowledge base system including expert's technology in the practics, has been developed. To developed this system, it has used C-language under HP-UNIX system and CIS customer language of the EXCESS CAD/CAM system. An application of this system will provide effective aids to the designer in this field.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.10
• /
• pp.27-33
• /
• 1998

Due to the requirement of high precision and complexity during the die design for electron gun elements, it sometimes causes human-errors. In addition, in the case of beginners, they have more trial and error than skilled engineers. To remove these problems and increase the productivity in the practice field, it needs the development of CAD system for electron gun element progressive die. Through this study, a CAD system of electron gun element progressive die, which is used, by knowledge base system including expert's technology in the practice, has been developed. To develop this system, it has used C-language under HP-UNIX system and CIS customer language of the EXCESS CAD/CAM system. An application of this system will provide effective aids to the designer in this field.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.8
• /
• pp.1349-1355
• /
• 2008

The paper shows the analysis of operating conflict of OCGR trip events and metering errors in the photovoltaic generation, wind generation distributed generation customers with no defect of the distributed generation facilities, which are connected to 22.9kV distribution lines. To analyze problems with metering errors and OCGR fault event, a power quality analyzer and PSIM program were used to test the field and to simulate in Sun-Cheon photovoltaic generation and Seo-Cheon photovoltaic generation customers. With the trial distribution line, the result of analysis was verified to prove with the same situation of the actual field. This paper suggests short term and long term countermeasures of OCGR fault events, analysis of over and shortage of metering errors in distributed generation customers.

• Journal of Genetic Medicine
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2022

Radiation therapy (RT) is a very important treatment for cancer that irradiates a large amount of radiation to lead cancer cells and tissues to death. The progression of RT in the aspect of personalized medicine has greatly advanced over the past few decades in the field of technical precision responding anatomical characteristics of each patient. However, the consideration of biological heterogeneity that makes different effect in individual patients has not actually applied to clinical practice. There have been numerous discovery and validation of biomarkers that can be applied to improve the efficiency of radiotherapy, among which those related to genomic information are very promising developments. These genome-based biomarkers can be applied to identify patients who can benefit most from altering their therapeutic dose and to select the best chemotherapy improving sensitivity to radiotherapy. The genomics-based biomarkers in radiation oncology focus on mutational changes, particularly oncogenes and DNA damage response pathways. Although few have translated into clinically viable tools, there are many promising candidates in this field. In this review the prominent mutation-based biomarkers and their potential for clinical translation will be discussed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.465-465
• /
• 2010

A controlled medical vocabulary is a vital component of medical information management because it enables computers to use information meaningfully and different institutions to share the medical data. There are currently many standard medical vocabularies - SNOMED-CT, ICD-10, UMLS, GALEN, MED, etc, but none is universally accepted as an optimal controlled medical vocabulary for application to medical information system. Moreover, it is difficult to settle the well-designed local data dictionary consisting of controlled medical vocabularies for the individual hospital information system (HIS). One of the major reasons is the local terminology with poor contents have been used in the hospital. Thus, as a trial, the local controlled vocabulary referencing system has being constructed in a limited medical field - nuclear medicine. We selected practical nuclear medicine terms from interpretation reports and electronic medical records, and removed ambiguity and redundancy, mapping the selected terms to standard medical vocabularies. Relationship and hierarchy structure between terms have being made, referring to standard medical vocabularies. Further studies may be warranted.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.2
• /
• pp.183-197
• /
• 2007

Field trial was conducted at the Research Farm of the Katsina State Agricultural and Rural Development Authority during the farming season of 2004 with a view to evaluate/determine the efficacy of some selected plant-derived biopesticides against the insect pests of cowpea as well as their effect on yield. The variety of the cowpea used was IT86D-719 and the plant derived biopesticides evaluated during the trial were chilli pepper, garlic, ginger, neem, sweetsop and tobacco. The experimental field was ploughed, harrowed and thereafter ridged before the commencement of the 2004 planting season. A total of twenty one (21) experimental plots were demarcated and arranged into seven treatment plots. The size of each plot was $5m{\times}4m$ while interspaces between adjacent plot and blocks were 1m and 2m, respectively. Results of the experiments showed that all the plant-derived biopesticide treatments were significantly (p>0.05) better than control treatment. The order of effectiveness of the treatments was tobacco (80-90%), sweetsop (75-85%), garlic (70-80), neem (72-78%), chilli pepper (60-70%) and ginger (30-50%). Furthermore, yield result corresponded positively with the effectiveness of the treatments. Results of the present finding suggest the use of tobacco, sweetsop and garlic as promising biopesticides in the control of cowpea insect pests.