• Title/Summary/Keyword: Field Stop

Search Result 212, Processing Time 0.029 seconds

An Approximate Solution for Diffraction-Induced Shoreline in a Double Headland and Comparison with Field Measurement

  • Shoaib, Muhammad;Kim, Dong Hee;Lee, Jung Lyul
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2016년도 학술발표회
    • /
    • pp.193-193
    • /
    • 2016
  • In past decades beach erosion has been remarkably severe along coasts of different parts of the world, so that distinct types of coastal protective measures have been implemented; seawalls, wave-dissipating breakwaters, groins, artificial headlands or detached breakwaters have been constructed. In recent years, at Bongpeong beach, South Korea, an artificial headland was constructed to stop the beach erosion. The structure resulted in severe beach erosion of the adjoining places. In order to stop the consequences, another headland was constructed at some distance, but the construction of double headland did not prevent the erosion significantly. This paper focuses on the accurate design of the artificial double headland construction. The study presents the application of equilibrium shoreline empirical formula of parabolic type to estimate the equilibrium stages of the artificial double headland beaches and an analytic solution is presented in the present study. The research has solved the empirical formula of parabolic type to find the optimum result by considering the essential parameters that influence the erosion after the construction of double headland.

  • PDF

발전용 가스터빈 Rotor 정지조건별 최적 Turning 운전시간 고찰: 501기종 현장실험 중심으로 (A Study on Optimal Turning Operation Time for Rotor Stop Condition in Gas Turbine: Based on Field Test of W501 Machines)

  • 유원주;이창열
    • 대한안전경영과학회지
    • /
    • 제25권3호
    • /
    • pp.1-7
    • /
    • 2023
  • As the capacity of renewable power generation facilities rapidly increases, the variability of electric power system and gas turbine power generation is also increasing. Therefore, problems may occur that require urgent repair while the gas turbine rotor is stopped. When the gas turbine rotor turning is stopped and then restarted, if the turning period is not appropriate, severe vibration may occur due to rotor bending. As a result of the experiment, it was confirmed that normal operation is possible when the gap data measured at the start of rotor turning after maintenance work is similar to the existing value. And the vibration value at the start of rotor turning was lower as the rotor temperature was lower or the stop period was shorter.

스톱모션 애니메이션 캐릭터 의상제작과정에 관한 사례 연구 (A case study on the costume making process of stop motion animation characters)

  • 김기훈;서지성
    • 복식문화연구
    • /
    • 제20권5호
    • /
    • pp.655-663
    • /
    • 2012
  • Due to increased interest in character costumes, the field of animation character costume design is gradually developing into a specialized domain. The costume-making process for animation characters presents many differences from the costume-making process for regular apparel. However, there remains insufficient research on the actual process of making the character costumes used in stop motion videos both in Korea and abroad. The purpose of this study is to establish a costume design process for animation characters. Furthermore, this study presents a case study on the costume planning and making process for 3D stop motion animation characters. The character costume-making process was segmentalized into the following stages: character analysis stage, character modeling stage, and character costume making stage. In the character analysis stage, the investigator analyzed the character's movements, designed the character images, and analyzed the movements and motions of the animation characters. After completing character modeling, this study proposed a method for making the character costume. The style of the character costume was designed, and the structural design reflected the position and size of joints as well as the angle of movements. The patterns of the character costume were produced through dimensional tailoring after measuring the body size of the character. Afterward, the costume was completed after passing through the fitting and revision stages. The clothing material was selected to fit the colors and feelings shown in the illustration. To complete the costume after comparing it with the initial illustration, it was revised based on the assessment of its volume and overall atmosphere.

충북 괴산군 두타산 일대의 야외지질조사 학습장 개발 (Development of Learning Place for Geologic Field Survey around the Duta Mountain, Chungbuk, Korea)

  • 이창진;정상원
    • 한국지구과학회지
    • /
    • 제26권1호
    • /
    • pp.41-57
    • /
    • 2005
  • 본 연구의 목적은 학생들로 하여금 실제 야외지질조사를 효과적으로 수행하기 위한 교육 자료를 개발하는 것이다. 이를 위하여 시대를 달리하는 다양한 암석과 지질구조를 가지고 있고 지리적으로 접근하기 편리한 음성분지의 남동부 두타산 일대를 대상으로 선정하였다. 음성분지의 야외지질 실습코스에는 13개의 관찰지점이 있으며 실제 현장에서 각 관찰 지점별로 학생들이 활동할 수 있도록 야외학습자료를 제시하였다. 이를 위해 일반 지형도나 수치 지형도를 이용하여 스스로 노선지질도를 작성하도록 하였으며 큰 구조나 서로 다른 암상과의 관계를 광역적으로 알 수 있도록 항공사진을 첨가하였다. 또한 각 관찰 지점마다 노두 및 편광 현미경 사진을 제시하여 야외학습에서 경험할 수 있는 환경으로 설계하여 실제로 야외에서 겪게 되는 갈등 요인을 최소화 할 수 있도록 하였다. 이렇게 구현된 야외지질조사자료는 충북대학교 사범대학 지구과학 수강자를 대상으로 학생들의 태도를 조사하였으며, 그 결과 정의적 측면에서 학생들이 야외학습을 수행하는데 도움이 된다는 긍정적인 변화를 보였으며, 특히 지구과학에 관한 구체적인 개념 형성에 많은 도움이 되는 것으로 분석되었다.

광선의 차폐가 없는 광시야 비축 2반사광학계 설계 (Optical Design of a Wide-field Off-axis Two-mirror System without Ray Obstruction)

  • 오혜진;이종웅
    • 한국광학회지
    • /
    • 제28권6호
    • /
    • pp.263-272
    • /
    • 2017
  • 넓은 시야를 가지는 광학계에서는 전반부는 음의 굴절능, 후반부는 양의 굴절능을 가지는 inverted telephoto 구조가 일반적으로 사용되고 있고, 2반사광학계에서는 inverse Cassegrain system이 inverted telephoto 구조에 해당한다. 하지만 통상적인 회전대칭 구성의 inverse Cassegrain system에서는 시야가 가려지고 광선의 차폐가 심한 문제점이 있다. 이 연구에서는 이점을 고려하여 inverse Cassegrain system의 제2면에 조리개를 두어 시야를 넓히고, 광선의 차폐가 없는 비축시야만을 사용하는 광시야 비축 2반사광학계를 설계하였다.

과천 송전선로 전자계 측정 (Measurement of Magnetic and Electric Field from Kwachun Power Transmission Lines)

  • 김덕원;유창용
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1996년도 추계학술대회
    • /
    • pp.353-356
    • /
    • 1996
  • Early this year the construction of new high voltage power lines have been forced to stop due to the demonstration of residents in Kwa-chun. According to mutual agreement between the residents and Korea Electric Power Corporation, electromagnetic field(EMF) from present power lines was measured and EMF after completion of new power lines was estimated. The results show that EMF near power lines Is relatively low, and EMFnear electric substation is quite high due to the short distance between the power lines and ground. For 4 conduction 345kV line, magnetic field decreases to 3mG at the distance of 50m from the power line.

  • PDF

Fast Measurement of Eyebox and Field of View (FOV) of Virtual and Augmented Reality Devices Using the Ray Trajectories Extending from Positions on Virtual Image

  • Hong, Hyungki
    • Current Optics and Photonics
    • /
    • 제4권4호
    • /
    • pp.336-344
    • /
    • 2020
  • Exact optical characterization of virtual and augmented reality devices using conventional luminance measuring methods is a time-consuming process. A new measurement method is proposed to estimate in a relatively short time the boundary of ray trajectories emitting from a specific position on a virtual images. It is assumed that the virtual image can be modeled to be formed in front of one's eyes and seen through some optical aperture (field stop) that limits the field of view. Circular and rectangular shaped virtual images were investigated. From the estimated ray boundary, optical characteristics, such as the viewing direction and three dimensional range inside which a eye can observe the specified positions of the virtual image, were derived. The proposed method can provide useful data for avoiding the unnecessary measurements required for the previously reported method. Therefore, this method can be complementary to the previously reported method for reducing the whole measurement time of optical characteristics.

차량용 변속기의 조향안전화 제어장치의 개발 (Development of the Safety Steering System of Motor Vehicles Transmission)

  • 송창섭
    • 한국생산제조학회지
    • /
    • 제4권2호
    • /
    • pp.12-17
    • /
    • 1995
  • The operation of heavy tracked vehicle has the problems in the steering that made by misoperations. The protection device is applied to the vehicles. But that device is applied to the vehicles. But that device has the engine stop and over load condition problems. the steering safety system is developed on the basis of clutch slip that proved the durability in the dynamo test and field test. The steering safety system caused the performance improvement of vehicles when steering.

  • PDF

Gasoline engine black sludge - occurrence, causes & testing

  • Lewis, Eric-J.
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 1987년도 제6회 학술강연회초록집
    • /
    • pp.1-27
    • /
    • 1987
  • 1. Gasoline engine sludge is a major worldwide problem 2. U.S. and European sludge have similarities 3. Stop-go driving and longer oil drains make the problem worse 4. Fuel is a major influencing factor 5. Increased use of cracked components may be cause 6. Sludge can be peproduced in controlled field tests 7. Daimler benz M102E and ford PV-2 (VE) tests have been developed to overcome problem by higher oil quality 8. The M102E and PV-2 respond in a similar way to increased dispersancy 9. High dispersant ocp viscosity modifiers appear to have unique adbantage in both tests

  • PDF

Steric 모드의 침강장-흐름 분획법을 이용한 황사의 특성분석 (Characterization of Asian dust using steric mode of sedimentation field-flow fractionation (Sd/StFFF))

  • 음철헌;김본경;강동영;이승호
    • 분석과학
    • /
    • 제25권6호
    • /
    • pp.476-482
    • /
    • 2012
  • 황사입자들은 수 나노미터에서 수 마이크론 사이의 크기를 가지는 것으로 알려져 있다. 황사가 환경 및 인체 건강에 미치는 영향은 황사 입자의 크기에 의존한다. 입자가 작을수록 멀리까지 이동하며, 인체의 호흡기관 깊숙이 침투한다. 침강장-흐름 분획법(sedimentation field-flow fractionation, SdFFF)은 채널 내 포물선형태의 흐름(parabolic flow profile)과 외부에서 가해지는 원심력의 상호작용을 이용하여 나노 및 마이크론 크기의 입자들의 분리를 제공한다. 본 연구에서는 황사입자의 크기별 분리와 특성분석을 위한 steric 모드 침강장-흐름 분획법(Sd/StFFF)의 응용 가능성을 테스트하였다. 이를 위하여 다양한 Sd/StFFF 파라미터들을(유속, stop-flow time, 원심력의 세기, 등) 최적화 하였다. Sd/StFFF 보정곡선의 $R^2$값은 0.9983으로 높은 직선성을 보였으며, 실험결과는 Sd/StFFF가 마이크론 입자의 크기별 분리에 우수함을 보여주었다. 광학현미경(optical microscopy, OM)을 이용하여 황사입자들의 크기와 모양을 조사하였다. 황사가 진할 때에는 약할 때보다 입자크기가 증가함을 보여주었다. 또한 비가 올 때에는 건조할 때보다 입자크기가 감소하였는데, 이는 입자 표면에 흡착되어 있는 성분들이 빗물에 의해 제거되었기 때문인 것으로 보여진다. 본 연구의 결과는 Sd/StFFF가 황사와 같이 환경입자의 크기특성분석에 유용함을 보여준다.