• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.9
• /
• pp.223-228
• /
• 2016

Nowadays users of Virtual Environment are want to play with thousands of players in an evolving virtual world at the same time over the internet. So, the load of this kind of Virtual Environments is heavier than that of any other precedents. One of load balancing methods is map-partition to divide the load of entire system which is vulnerable to delay message between clients and servers. In this paper, we propose a Migration Agent application server architecture using to help migration of player character between field servers and to reduce response time between clients and field servers. Migration Agent is reduce Player Character's responds time as Cache Server, if Player Character move to another Field Server, Player Character need the synchronization process in the DBMS approach, to minimize response time by reducing the period for cross - Player Character Field Server to perform the role. Field Server by placing them in form of a stack existing form of grid, for load concentrated on a specific server.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.8
• /
• pp.1291-1298
• /
• 2004

In development of monitoring and control systems, one of the most important points is to consider a redundancy so that the system can be operated normally although hardware faults are partly occurred. The purpose of this paper is to introduce a monitoring and control system with a redundancy function for I/O servers and communication networks. I/O servers composed with an active server and a standby server. Each server also has 3 communication ports, 2 ports of them were connected to field units and the other 1 port was connected to the other server. Field units have to be constructed to 2 communication ports connected I/O servers through communication lines. Also, server communication module was implemented for analyzing and handling fault elements. and was submodularized for linking easily with a monitoring and control module. An experiment with 2 servers and 2 field units was constructed to demonstrate its effectiveness.

• The Journal of Information Technology
• /
• v.12 no.2
• /
• pp.49-55
• /
• 2009

Currently the Web, multiple files in the Client to upload to the server of the multi-upload method, files are stored in specific folders on the server, the file name field in DB(Database Field) stored in a way that the process has been widely utilized. Therefore, a minimum number of file upload as many file names in the Database and the Table should be created in the field, but also a variable number of files can be uploaded has no limits. In this paper we proposed the new method that files to be uploaded to the server, you can upload a limited number of files, nor due to upload files to reduce load on the database to improve the processing speed of a single field using a multi-method file uploads using PHP directly implemented

• The Journal of the Korean dental association
• /
• v.43 no.1 s.428
• /
• pp.41-52
• /
• 2005

Information Technology has extended its scope to the medical field as well as dental field. Like medical field, network ststem for dental field requires acquisition, storage, and display of images. However, unlike the medical field, the system to integrate several information including medical images has not been developed according to industrial standard for management of digital image for medical use, so called DICOM conformance. which makes the digital environment in dental field more and more difficult and expensive for this standardization and comfortable communication in LAN and WAN. To solve this problem, the DICOM encoder and server has to be developed because the DICOM file can be easily retrieved with patient's information from the DICOM server in the system as DICOM file has the standard specification to integrate the patient's information. The information including image and other discrete data can be easily integrated in DICOM file and can be used without any difficulty for precise diagnosis and for contribution to the decision making for each treatment protocol. Therefore, the system composed of DICOM encoder and server in dental practive for DICOM file must be developed with prudent consideration of the several strategic factors: I) Enhanced diagnostic capability through the integrated information of image and clinical data. ii) Clinician-friendly interface to simulate the systemic treatment procedure in clinical practice iii) Implementation of multidisciplinary treatment protocol The development of DICOM encoder and server based on these strategic considerations will provide paperless and filmless hospital environments by the seamless integration and management of patient's history, several clinical data and clinical images through image processing for quantitative analysis. The system also allows clinicians to provide more predictable dental care for the patients.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.151-152
• /
• 2010

In this paper, a weather field server is designed and developed for local area weather condition monitoring system. Weather field server consists of an integrated sensor board and wireless sensor node to enable quick response of changing weather conditions in the valley region. A server program is established to monitor and analyze real-time weather condition in order to detect and prevent weather damages occurring in the locality.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.29-38
• /
• 1998

This ppaer suggests a congestion control scheme for CL(ConnectionLess) overlay network using the feedback loops getween CL werver, between CL servers, and the header translation table of CL server. The CL overlay network for CBDS(Connectionless Broadband Data Service) defined by ITU0T(International Telecommunication Union-Telecommunication) consists of CL servers which route frames and links which connect between CL user and CL server or between CL servers. In this CL overlay network, two kinds of congestions, link congestion and CL server congestion, may occur. We suggest a scheme that can solve the congestion using ABR(Available Bit Rate) feedback control loop, the traffic control mechanism. This scheme is the link-by-link method suing the ABR feedback control loops between CL user and CL server or between CL servers, and the header translation table of CL server. As CL servers are always endpoints of ABR connections, the congestion staturs of the CL server can be informed to the traffic sources using RM(Resource Management) cell of the ABR feedback loops. Also CL server knows the trafffic sources making congestion by inspecting the source address field of CLNAP-PDUs(ConnectionLess Network Access Protocol - Protocol Data Units). Therefore this scheme can be implemeted easily using only both ABR feedback control loop of ATM layer and the congestion state table using the header translation table of CL server because it does not require separate feedback links for congestion control of CL servers.

• The KIPS Transactions:PartA
• /
• v.19A no.3
• /
• pp.139-146
• /
• 2012

In the server cluster environment, one of the ways saving energy is to control server's power according to traffic conditions. This is to determine the ON/OFF state of servers according to energy usage of data center and each server. To do this, we need a way to estimate each server's energy. In this paper, we use a software-based power consumption estimation model because it is more efficient than the hardware model using power meter in terms of energy and cost. The traditional software-based power consumption estimation model has a drawback in that it doesn't know well the computing status of servers because it uses only the idle status field of CPU. Therefore it doesn't estimate consumption power effectively. In this paper, we present a CPU field based power consumption estimation model to estimate more accurate than the two traditional models (CPU/Disk/Memory utilization based power consumption estimation model and CPU idle utilization based power consumption estimation model) by using the various status fields of CPU to get the CPU status of servers and the overall status of system. We performed experiments using 2 PCs and compared the power consumption estimated by the power consumption model (software) with that measured by the power meter (hardware). The experimental results show that the traditional model has about 8-15% average error rate but our proposed model has about 2% average error rate.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.229-233
• /
• 2001

In this paper, we propose a remote controller for robot manipulator using local area network(LAN) and internet. To do this, we develope a server-client system as used in the network field. The client system is in any computer in remote place for the user to log-in the server and manage the remote factory. the server system is a computer which controls the manipulator and waits for a access from client. The server system consists of several control algorithms which is needed to drive the manipulator and networking system to transfer images that shows states of the work place, and to receive a Tmp data to run the manipulator. The client system consists of 3D(dimension) graphic user interface for teaching and off-line task like simulation, external hardware interface which makes it easier for the user to teach. Using this server-client system, the user who is on remote place can edit the work schedule of manipulator, then run the machine after it is transferred and monitor the results of the task.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.425-428
• /
• 2002

The technology of Computer Graphics (CG) has been in great progress for almost 20 years and has proven to be a valuable tool for a broad variety of fields, including nuclear engineering. To work in any hazardous environment for example radiation field is particularly challenging because the danger is not always visually apparent. In this study as the application of CG to nuclear engineering field, we proposed to develop a radiation risk recognition aided system in which various radiation information; radiation risks, radiation distribution, hazard information and so on, were visualized by CG. The system used the server and client system. In the server there were two parts; one (main-server) was the database part having various data and the other (sub-server) was the visualization part visualizing the human phantom by POV-Ray. In the client there was the input and output part. The outputs from the system were various radiation information represented by coloring, circle graph and line graph intuitionally. The system is useful for a broad range of activities including radiation protection, radiation management, dose minimization, and demonstration to the public.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.636-641
• /
• 2018

In recent years, the Internet of things has grown rapidly and is being used in many fields. The function of an Internet device isto collect information in various environments and to provide useful information to users. Due to recent developments in technology, the kinds of Internet devices are increasing and the prices are getting cheaper. In addition, many open source platforms that are easy to use have been developed and are providing convenience to users. In this paper, wireless data transmission and cloud server system based on ESP-12E NodeMCU module was designed and sensor information collected from Internet devices was transmitted to cloud server through WiFi wireless communication. The collected sensor data was saved by creating channel and field in the cloud server and the data of each field was visualized as a graph.