• KIEAE Journal
• /
• 제7권2호
• /
• pp.31-37
• /
• 2007

Despite of many supportive research to the usefulness of slide evaluation on environment of outdoor lighting, study method of using slides have provoked many discussions of its manifestation of reality of field conditions. This study aims to compare the results of slide survey with that of field survey. Distant view and short range view of nightscape of Seoul were selected. Field measurement of luminance and chromaticity were conducted and questionnaire survey were conducted. Frequency analysis, T-test, factor analysis were conducted. Results shows that distant view and short range view of field survey have better visual atmosphere than slide survey. In addition, slide survey on distant view shows lowest values. Difference between field survey and slide survey on distant view is much bigger than the results of short range view.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.720-731
• /
• 2014

There are many kinds of optical systems to widen a field of view. Fisheye lenses with view angles of 180 degrees and omni-directional systems with the view angles of 360 degrees are recognized as proper systems to widen a field of view. In this study, we proposed a new optical system to overcome drawbacks of conventional omni-directional systems such as a limited field of view in the central area and difficulties in manufacturing. Thus we can eliminate the undesirable reflection components of the omni-directional system and solve the primary drawback of the conventional system. Finally, tolerance analysis using Zernike polynomial coefficients was performed to confirm the productivity of the new optical system. Furthermore, we established a method of optical axis alignment and compensation schemes for the proposed optical system as a result of tolerance analysis. In a sensitivity calculation, we investigated performance degradation due to manufacturing error using Code V(R) macro function. Consequently, we suggested compensation schemes using a lens group decentering. This paper gives a good guidance for the optical design and tolerance analysis including the compensation method in the extremely wide angle system.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.99-109
• /
• 1998

This paper describes the analysis of flow and aeroacoustic field around a car-like body. The governing equations, 3-D unsteady incompressible Navier-Stokes equations, are solved with the iterative time marching scheme. The Chimera grid technique has been applied to efficiently simulate the flow around the side-view mirror, After the flow field analysis has been converged, the aerodynamic noise analysis of the side-view mirror has been performed by solving Ffowcs Williams and Hawkings equation. From the present numerical simulation, the A- and C-pillar vortex are evidently shown and the aerodynamic noise level induced by the side-view mirror is predicted to about 100dB.

• 한국주거학회논문집
• /
• 제17권3호
• /
• pp.99-109
• /
• 2006

The purpose of this study was to analyze the characteristic of each view in an apartment unit in terms of the quality. This study was accomplished by two research methods; the field survey on 181 apartment complexes in Daegu, and the preference evaluation on 24 cases sampled in the sense of its location, i.e. inside or outside of a complex. In the field survey, view targets were categorized into various items such as a building, a road, a mountain, a tree, another apartment, the sky, and so on, and the characteristics of the distance from a viewer to view targets and view of the level in an apartment were analyzed. In the preference evaluation, 24 cases, each one has one of the follows; the natural view, the artificial view, and the combined view of the both, were chosen and those were evaluated by 167 interviewees. As a result, the conclusions from the study were drawn as follows; 1) The view, the combination of buildings, roads, mountains, trees, apartments, and the sky, is usually seen in an apartment unit. 2) The type of view target is more significant to a person than its location. 3) The natural and combined view are preferred to the artificial one. 4) In the case of the same outside view, a person likes the open view more than the somewhat covered one.

• 감성과학
• /
• 제24권4호
• /
• pp.17-28
• /
• 2021

본 연구의 목적은 현실, 가상현실에서 시야각 수준을 세분화하여 지각된 거리에 미치는 영향을 규명하는 것이다. 본 연구는 가상현실조건 제시에 현실조건 환경을 모방한 복제품을 사용하여 두 관찰조건을 동등하게 구성하였다. 시야각 조작을 위해 현실조건에서 시야각을 제한하는 안경을 사용하였고, 가상현실조건에서 HMD를 통해 현실과 동등한 방법으로 시야각을 제한함으로써 두 관찰조건에서 시야각 수준을 동일하게 조작하였다. 실험에 참여한 성인 18명은 현실, 가상현실 각 관찰조건에서 머리 움직임을 제한한 후 조건에 따라 상이한 제한된 시야로 대상을 관찰하였다. 이후 참가자들은 정신적으로 대상까지 걷는데 소요된 시간을 측정하는 상상보행 측정방법을 통해 지각된 거리를 보고하였다. 대상은 3 m, 4 m, 5 m 거리에 제시되었으며 각 거리수준마다 3회 반복측정 하였다. 측정한 시간 측정치는 거리로 환산하여 분석에 사용하였다. 실험 결과, 가상현실조건의 거리추정치는 현실조건보다 작았다. 또한 시야각 수준이 감소함에 따라 거리추정치가 감소하였다. 현실조건에서 거리추정치는 시야각 수준에 따라 달라지지 않았다. 그러나 가상현실조건에서 거리추정치는 시야각 수준이 감소함에 따라 감소하는 경향을 보였다. 논의에서 본 실험결과와 시사점, 한계점 및 추후 연구 방향에 대해 제시하였다.

• 한국정보통신학회논문지
• /
• 제10권6호
• /
• pp.1082-1087
• /
• 2006

본 논문에서는 LabVIEW 기반의 가스터빈 데이터 취득 및 모니터링 시스템을 제안한다. C-Tune DAS로 명명된 실시간 모니터링 시스템은 가스터빈의 유지/보수시 실시간 동작을 분석하는데 중요한 역할을 담당한다. LabVIEW 소프트웨어는 고유 기능별로 데이터 취득부, 데이터 분석 및 표시부, 데이터 저장부로 구성된다. 데이터 취득부를 통해 PMS 서버와 두 대의 cFP로부터 데이터를 취득한다. 복합화력 발전소의 상용 가스터빈에 적용하여 개발된 모니터링 시스템의 타당성을 검증한다.

• 반도체디스플레이기술학회지
• /
• 제22권3호
• /
• pp.52-61
• /
• 2023

We designed a novel ultra-miniaturized microcolumn structure having an stigmator to significantly improve throughput per unit time, which is the biggest disadvantage of microcolumns. We adopted the structure of the stigmator in the form of an electrostatic octupole electrode, and used an electrostatic quadrupole deflector with a relatively simple structure considering the increase in wiring due to the introduction of the stigmator. We have dramatically reduced the effect of astigmatism that occurs when the electron beam probe is scanned to the periphery of the target by introducing the stigmator between the control electrode and the deflector. As our numerical analysis simulation results, the field of view obtained as a result of this study is about 46.3% improved compared to our previous study, and the electron beam probe size of less than 10 nm was achieved in the entire field of view.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권3호
• /
• pp.13-19
• /
• 2013

Superconducting field coils using a high-temperature superconducting (HTS) wires with high current density generate high magnetic field of 2 to 5 [T] and electromagnetic force (Lorentz force) acting on the superconducting field coils also become a very strong from the point of view of a mechanical characteristics. Because mechanical stress caused by these powerful electromagnetic force is one of the factors which worsens the critical current performance and structural characteristics of HTS wire, the mechanical stress analysis should be performed when designing the superconducting field coils. In this paper, as part of structural design of superconducting field coils for 17 MW class superconducting ship propulsion motor, mechanical stress acting on the superconducting field coils was analyzed and structural safety was also determined by the coupling analysis system that is consists of commercial electromagnetic field analysis program and structural analysis program.

• Journal of Information Technology Applications and Management
• /
• 제13권3호
• /
• pp.75-87
• /
• 2006

In this paper. we consider the multi-view video technology. The technology, which is a field of 3-Dimensional video processing, enables the user to watch the various view-point of video. We expect that the technology will be applicable to a lot of video services. The economic effects of new technology are very important concern for the technology developer and the technology development policy makers. We, therefore. propose a general method for the economic repercussion effects of the multi-view video technology. The method is based on the expert opinion and input-output analysis. The results for the multi-view video technology are included.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.281-284
• /
• 2005

This paper deals with the parametric analysis of electric and magnetic fields generated by lightning discharges. The measuring system consisted of the plate-type electric field and loop-type magnetic field sensor, the voltage follower, the active integrator and LabVIEW software. The parameters of the electric and magnetic field waveforms produced by intracloud lightning strokes were presented.