• The KIPS Transactions:PartD
• /
• v.15D no.6
• /
• pp.793-802
• /
• 2008

The development methods which utilize OSSs have been tried as new alternative to solve limits of the previous software developments such as the quality of software, and time and cost of developments. Especially, small and medium companies are suffering from difficulty in applying large-scale development methodology whenever they develop softwares. Therefore, in the current situation that demand for small-scale development methodology is increasing, the methods of utilizing OSSs can become an efficient way to save costs and reduce a development period. Accordingly, analysis of open-source is no fixed procedure or method to utilize open-source for software developments in the field. In this thesis, to solve such problems, we propose the procedures and methods for identifying and selecting suitable open-source, and effective methods for improvement and integration through least modification on the basis of synthesis of existing researches and experiences in development projects. For selection of OSSs, we did identify correct requirements for the software to be developed, investigate the open-source just matching with such requirements, draw a candidate index, establish assessment criteria, and the consequently present a method to select OSSs. And, we deduced the validity and improvement of each detailed activity from practical application to an actual project and assessment.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.487-495
• /
• 2017

The thermal characteristics of the electrodeless lamp are one of the main factors that determine the design and performance of the lamp. The coupler changes the impedance characteristic by heat and its use temperature is usually within about $150^{\circ}C$. In this study, we observed the phenomenon when the coupler was exposed at a temperature of $150^{\circ}C$ or higher, which has not been discussed so far. Two types of coupler A and coupler B with different spacing between the inner tube and the coupler were analyzed for electrical, thermal and optical properties and deterioration characteristics with different heat and heat shielding conditions. First, the impedance of the system is obtained and used as a criterion for analyzing the electrical characteristics through it. The diameters of the two types of couplers are 1 mm, and the experimental result shows that the coupler diameter is 1 mm, which can cancel out the loss of the magnetic field strength. Therefore, based on these results, when the coupler is exposed to high temperature of about $200^{\circ}C$, the efficient design method corresponding thereto is proposed.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.21 no.4
• /
• pp.27-36
• /
• 2015

Purpose: Of late, the focus of service design is moving toward emphasizing customer satisfaction and taking users' experience more seriously. In addition to the change in perspective in service design, scholars in this area are paying more attention to service design methodology and process, as well as its theory and real-world case studies. In the case of medical space, there have been few studies in attempting to apply service design methods useful for deriving user-focused results. The author of this paper believes, however, case study-oriented approaches are more needed in this area rather than ones focusing on theoretical aspects. The author hopes thereby to expand the horizon to practical application of spatial design beyond service design methodology. Methods: In order to incorporate the strengths of service design methodology that can reflect a variety of user opinions, this study will introduce diverse tools in the framework of double diamond process. In addition, it will present field cases that successfully brought about best results in medical space design. It will end with summarizing the ideal process of medical space design which is reasonable and comprehensive. Results: Medical service encompasses preventive medicine as well as treatment of existing medical conditions. A study in establishing the platform of medical service design consists of a wide range of trend research, followed by the summary of two-matrix design classification based on results of the trend research. The draft of design process is divided into five stages composed of basic tools for establishing spatial flow lines created by matching service design tools with each stage of space design processes. In all this, most important elements to consider are communication and empathy. When service design is actually applied to space design, one can see that output has reflected the users' needs very well. The service design process for user-oriented medical space can thus be established by interactions on the final outcome and feedback on the results. Implications: One can see that the service design with the hospital at its center produces the result that encompasses the user's needs best. If the user-focused service design process for medical space can be extended to other space designs, the author believes that it would enhance the level of satisfaction for users and minimize trials and errors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1452-1458
• /
• 2009

In this paper, Our proposed Multipurpose Complex Card UHF band RFID small-size Tag antenna. Multi purpose Complex Card UHF band RFID small-size Tag antenna that is to minimize the low efficiency of RFID Tag Read Range that generates space limitation and a conductor surrounded by inducing fingerpring system with dual(HF, UHF) Card is presented. Our proposed UHF band RFID small-size Tag antenna is for the Multipurpose Complex Card that is mounted on the fingerpring system as well as the HF Tag. It also enables to minimize and facilitates Tag chip matching by adjusting Tapered, Meander line and Loop structure. Given the card substance properties and periphery circuit, the proposed small-size Tag antenna, in this report, is designed with PET film with size of $50{\times}15mm^2$. The RFID small-size Tag method for measurements is used by EPCglobal Static Test instrument in Anechoic Chamber, which is tested with dual Card, within the car and in wallet. It is found that Read Range is 3.8m from the EPCglobal Static Test, Maximum Read Range within the car from the field test results in 7.6m. Proposed Tag antenna is will be used in the parking control security system.

• Journal of Digital Convergence
• /
• v.17 no.2
• /
• pp.381-387
• /
• 2019

Since the development of NCS-based curriculum in field of game education is not well studied, so we carried out research on the curriculum development of game contents department of Kimpo University as the first study to link game education and NCS. In order to develop the NCS-based game education course, we analyzed the game industry environment and conducted a demand survey on the game industry officials to derive the vocational basic subjects required for game contents creation. In addition, we analyzed the types of manpower training by using on-site experts (SME). SME also designed the NCS curriculum by matching the manpower type comparing with NCS classification and capacity unit, analyzing the usefulness of each Capacity unit, and finally, by arranging each NCS and non-NCS subjects by semester. This research is meaningful as the first study linking NCS and game content creation, and it will be a reference for other education institutions planning game education course based on NCS. It also can be used as a basic material for researching game education quality management (CQI) as well as improvement methods for future game education courses.

• Journal of Platform Technology
• /
• v.6 no.4
• /
• pp.59-68
• /
• 2018

The objective of this study is to develop an embedded antenna structure with NFC and WPC composite functions. By selecting stable materials, the optimal component ratio of the polymer sheet was determined. The low cost embedded winding method compared to the existing FPCB was devised. During the winding process, characterization and process technology were developed. We also fabricated a ferrite mold to process the WPC grooves and developed the process technology for optimizing the WPC antenna. The following conclusions were obtained. (1) Optimum composition ratio was derived as Fe 87.5%, Si 7%, Al 5.5% and selected as the final material. (2) Optimal sheet conditions were derived from the experimental evaluation method and the experimental design method through the combination test of the optimized sheet and the conventional mass production FPCB. (3) According to coil diameter and inner diameter, Q value fluctuation, resistance value and efficiency fluctuation are obtained. Therefore, the most suitable coil condition is selected and Rx matching is performed. (4) The EMV load modulation test and the cognitive distance test of the polymer sheet and the ferrite sheet showed that the recognition distance of the polymer sheet at 1k and 4K was 32-33 mm and the recognition distance of the ferrite sheet at the same condition was 30-31 mm.

• The Journal of the Korea Contents Association
• /
• v.21 no.6
• /
• pp.104-112
• /
• 2021

In this study, emotional analysis was conducted based on the basic attribute data of music and the emotional model in psychology, and the result was applied to the visualization rules in the formative arts. In the existing studies using musical parameter, there were many cases with more practical purposes to classify, search, and recommend music for people. In this study, the focus was on enabling sound data to be used as a material for creating artworks and used for aesthetic expression. In order to study the music visualization as an art form, a method that can include human emotions should be designed, which is the characteristics of the arts itself. Therefore, a well-structured basic classification of musical attributes and a classification system on emotions were provided. Also, through the shape, color, and animation of the visual elements, the visualization of the musical elements was performed by reflecting the subdivided input parameters based on emotions. This study can be used as basic data for artists who explore a field of music visualization, and the analysis method and work results for matching emotion-based music components and visualizations will be the basis for automated visualization by artificial intelligence in the future.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.102-108
• /
• 2020

In this paper, we propose a real-time method of detecting hand motions and extracting the signal frame induced by EF(Electric Field) sensors. The signal induced by hand motion includes not only noises caused by various environmental sources as well as sensor's physical placement, but also different initial off-set conditions. Thus, it has been considered as a challenging problem to detect the motion signal and extract the motion frame automatically in real-time. In this study, we remove the PLN(Power Line Noise) using LPF with 10Hz cut-off and successively apply MA(Moving Average) filter to obtain clean and smooth input motion signals. To sense a hand motion, we use two thresholds(positive and negative thresholds) with offset value to detect a starting as well as an ending moment of the motion. Using this approach, we can achieve the correct motion detection rate over 98%. Once the final motion frame is determined, the motion signals are normalized to be used in next process of classification or recognition stage such as LSTN deep neural networks. Our experiment and analysis show that our proposed methods produce better than 98% performance in correct motion detection rate as well as in frame-matching rate.

• Journal of Pharmacopuncture
• /
• v.25 no.3
• /
• pp.233-241
• /
• 2022

Objectives: Asthma is a chronic disease, and the demand for herbal medicines in this field has increased in recent years. The new findings highlight the role of the gut-lung axis in the pathophysiology of asthma. Hence, this study will evaluate the safety and efficacy of Glasthma syrup, an herbal formula based on Persian medicine, in improving asthma and regulating intestinal permeability. The formula consists of five herbal ingredients that have anti-inflammatory effects on the respiratory tract, also known as gut tonics. Methods: The study will be conducted as a placebo-controlled, triple-blind, randomized trial. It will consist of a 4-week intervention followed by a 4-week follow-up period. The target sample size is 20 patients with moderate asthma aged 18 to 60 years. Eligible participants will be randomly assigned to either the experimental group or the control group in equal numbers. Patients in the experimental group will take Glasthma syrup (7.5 mL, twice a day), while patients in the control group will take a matching placebo. Both groups will receive a 4-week combination of a long-acting beta2 agonist and a leukotriene modulator as standard of care. Inhaled corticosteroids can be used as rescue medication as needed. Results: The primary outcomes are asthma symptom scale, lung function, and intestinal permeability. Secondary outcomes include quality of life, symptom recurrence rates, and blood tests. A safety assessment will also be conducted during the trial. Conclusion: In this trial, the effects of Glasthma syrup in patients with moderate asthma will be examined. The study will also assess the effects of the formulation on the gut-lung axis by simultaneously monitoring the gut permeability index, asthma symptoms, and lung function.

• Explosives and Blasting
• /
• v.40 no.4
• /
• pp.15-26
• /
• 2022

With the recent increase in old and dangerous buildings, the demand for technology in the field of structure demolition is rapidly increasing. In particular, in the case of structures with severe deformation of damage, there is a risk of deterioration in stability and disaster due to changes in the load distribution characteristics in the structure, so rapid structure demolition technology that can be efficiently dismantled in a short period of time is drawing attention. However, structural deformation such as unauthorized extension or illegal remodeling occurs frequently in many old structures, which is not reflected in structural information such as building drawings, and acts as an obstacle in the demolition design process. In this study, as an effective way to overcome the discrepancy between the structural information of old structures and the actual structure, access to actual structures through 3D modeling was considered. 3D point cloud data inside and outside the building were obtained through LiDAR and drone photography for buildings scheduled to be blasting demolition, and precision matching between the two spatial data groups was performed using an open-source based spatial information construction system. The 3D structure model was completed by importing point cloud data matched with 3D modeling software to create structural drawings for each layer and forming each member along the structure slab, pillar, beam, and ceiling boundary. In addition, the modeling technique proposed in this study was verified by comparing it with the actual measurement value for selected structure member.