• Journal of the Mineralogical Society of Korea
• /
• v.26 no.2
• /
• pp.111-118
• /
• 2013

Diagenetic black chert nodules occur in the Paleozoic dolostone in Susan, Jecheon, Korea. They reacted with dolomite to form alteration rim around the nodules during the contact metamorphism probably related to the intrusion of biotite granite. In the earlier stage of alteration, talc and calcite replaced both the chert and dolomite, which were subsequently replaced by tremolite. Significant mass of tremolite occurs along the horizon enriched with chert nodules. Scanning electron microscopy and optical microscopy of the tremolite specimens revealed the elongated morphology of diverse aspect ratios coexisting in several mm scale. Non-asbestiform tremolite columns were also common as well as asbestiform fibrous bundles. Quantitative estimation of asbestos should be more cautious for naturally occurring materials because all the tremolite particles in the outcrop are not asbestiform. The occurrence of asbestiform tremolite in the Susan area indicates that a combination of chert-bearing dolostone, heat source, and aqueous fluids is one of the geological environments for the formation of asbestiform tremolite.

• Archives of Craniofacial Surgery
• /
• v.13 no.1
• /
• pp.63-67
• /
• 2012

Purpose: Lipogranuloma is the reaction of adipose tissue to various oils, paraffin, and other hydrocarbons injected into subcutaneous tissue for cosmetic or other reasons. The authors experienced a case of sclerosing lipogranuloma on the nasal dorsum. Methods: A 42-year-old female, without a history of the injection of any foreign materials, was admitted on our hospital for a painless, irregular, and firm mass located on her nasal dorsum with step-off deformity. It was considered that the mass had developed after augmentation rhinoplasty. The size of mass had been increased after closed reduction of nasal bone fracture. On April 2011, under general anesthesia, the mass was removed by open rhinoplasty technique. In addition, a pathologic examination was performed. After the mass extirpation, dermofat graft was performed for the correction of depression deformity. Results: The histopathological findings demonstrated a Swiss cheese pattern with variably-sized vacuoles, which corresponded to lipid removed with tissue processing, and variable foreign body giant cell reaction, fat necrosis, and hyalinized fibrous tissue. The pathologic diagnosis is lipogranuloma replacing nasalis muscle. It has been considered that sclerosing lipogranuloma is caused by nerve injury during augmentation rhinoplasty and the ointment used after the closed reduction of nasal bone fracture, which infiltrated through the injured mucosa. Conclusion: During the treatment of rhinoplasty or nasal bone fracture, the nerve injury or the ointment use can lead to lipogranuloma. Therefore, careful dissection for avoidance of the nerve injury and limited use of ointment seems to be helpful in decreasing incidence of lipogranuloma.

• Composites Research
• /
• v.12 no.2
• /
• pp.10-25
• /
• 1999

A new evaluation method for the interfacial properties of fibrous composites based on a fragmentation technique is proposed by using the gradual multi-fiber composite, in which the inter-fiber spacing is gradually changed. The results showed that as the inter-fiber distance increased, the aspect ratio of broken fibers decreased while the interfacial shear strength between the fiber and matrix increased. When the reciprocal of the inter-fiber destance was taken for the above relations, both the aspect ratio and interfacial shear strength showed a saturated value. This means that the gradual multi-fiber composite indicates an upper bound in aspect ratio and an upper bound in interfacial shear strength. It was concluded that this fragmentation test could be a new method for composite evaluation, since reducing a difference between these two bounds is effective for composite strengthening. In addition an elastoplastic finite element analysis was carried out to relate the above results with fiber stress a distribution around fiber breaks. It was proved that the bound obtained in the gradual multi-fiber composite test is closely related to stress concentrations caused by a group of multi-fiber breaks.

• Imaging Science in Dentistry
• /
• v.40 no.3
• /
• pp.137-142
• /
• 2010

Purpose : This study was performed to evaluate the diagnostic ability of ultrasonography in detection of bone defects and new bone formation. Materials and Methods : Experimental bony defects were prepared on the parietal bone samples acquired from 3.5 kg New Zealand male rabbits. The defects were evaluated using ultrasonography and CBCT, and examined histologically at interval of 1, 3, 6, and 8 weeks. Results : Ultrasonograph demonstrated hyperechogenicity in the defect area at 3 weeks and broadened hyperechogenicity from the margin of bone defect at 6 and 8 weeks due to new bone formation. On the CBCT images, new bone formation was first observed at 3 weeks around the margin of the defect, and showed gradually increase at 6 and 8 weeks. Histologic findings revealed existence of the fibroblasts and fibrous connective tissue with abundant capillary vessels only at 1 week, but osteoid tissue and newly formed trabecular bone at 3 weeks. Bone remodeling in the defect area was observed at 6 weeks and increased calcification and dense trabecular bone formation was observed at 8 weeks. Conclusions : Ultrasonograph proved to be a very useful diagnostic tool in detecting the bony defect and new bone formation. Additionally, ultrasonography provided valuable information regarding the blood supply around the defect area.

• Journal of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.53-59
• /
• 1977

A method of synthesizing $NaAlCO_3(OH)_2$ (Dawsonite) and $KAlCO_3(OH)_2$, was investigated by blowing $CO_2$ gas into sodium and potassium aluminate solutions. The reactions were accomplished at a temperature of 80 to $90^{\circ}C$, while $CO_2$ gas was blowing into the solutions which the molar ratios of $Na_2O/Al_2O_3,\;and\;K_2O/Al_2O_3$ were 6 to 8 and 8 to 10, respectively. It was observed that highly purified Dawsonite and $KAlCO_3(OH)_2$ are produced when Alumina is present in Boehmite at an equilibrium solid phase with a large amount of $HCO_3^-$ in the solutions. The rational formulas of Dawsonite and $KAlCO_3(OH)_2$synthesized under the conditions should be expressed as $NaAlO(OH)HCO_3\;and\;KAlO(OH)HCO_3$, respectively, by IR analysis. In addition, electron microscopic observation also indicated that Dawsonite in a fibrous crystal and $KAlCO_3(OH)_2$ in a needleshaped crystal.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.196-201
• /
• 2012

Electrospinning is a versatile process used to prepare micro or nano sized fibers from various materials dissolved in volatile solvents. This study reports electrospun pullulan fibrous webs fabricated through electrospinning using water as a solvent. The electrospinning conditions such as pullulan (PUL) concentration and applied voltage were optimized in order to obtain smooth electrospun fibers. The concentration of PUL greatly influenced the viscosity and surface tension of PUL solution. PUL beaded electrospun fibers were obtained from PUL solutions with concentrations lower than 5 wt%, while homogenous electrospun fibers were prepared from solutions with high concentration and high viscosity. The average diameters of PUL fibers were decreased to 200 nm when the polymer concentration was kept at 10 wt% and the applied voltage was fixed at 15 kV during electrospinning. PUL electrospun fiber exhibited higher solubility, flexibility, softness and adhesive strength.

• Journal of Environmental Health Sciences
• /
• v.26 no.4
• /
• pp.21-28
• /
• 2000

Various man-made mineral fibers(MMMF) including refractory ceramic fiber(RCF) have been used widely in industries as insulation materials. The effect of fibrous dust on human health depends on fiber size, concentration (exposure level), and durability in biological system. Therefore, these parameters should be determined to evaluate accurately the potential risk of fibers on human health. The purpose of this study was to characterize the size of airborne fiber and the workers＇ exposure to airborne fibers in refractory ceramic fiber manufacturing and processing factories. Airborne fibers were collected on 25-mm mixed cellulose ester membrane filters at personal breathing zones, and analyzed by A and B counting rules of the National Institute for Occupational Safety and Health(NIOSH) Method # 7400. The average ratios of the fiber density by B rule to the fiber density by A rule was 0.84. This result indicates that the proportion of respirable fibers (<3 ${\mu}{\textrm}{m}$ diameter) in air samples was high. The average diameter and length of airborne fibers were 1.05${\mu}{\textrm}{m}$ and 35${\mu}{\textrm}{m}$, respectively. The average fiber concentrations (GM) of all personal samples was 0.26f/cc, and the average concentration was highest at blanket cutting and packing processes. The fifty seven percent of personal air samples was exceeded the proposed American Conference of Governmental Industrial Hygienists(ACGIH) Threshold Limit Value(TLV), i.e. 0.2 f/cc. It was concluded that the RCF industrial workers had the higher potential health risk due to small fiber diameter, long fiber length, and high exposure level to the airborne fibers.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1322-1326
• /
• 1997

Characteristics of viscosity and spray dried particles for several polysaccharides were studied to investigate the possibilities as wall materials for microencapsulation. Viscosities of 10% maltodextrin, 10% gum arabic, 10% dextran, 1% gum locust bean, and 1% gum karaya were 2.2 mPa.s, 9.2 mPa.s, 13.0 mPa.s, 4660.0 mPa.s, and 77.0 mPa.s, respectively. In scanning electron micrographs for spray dried polysaccharides, gum arabic had spherical shapes at 20% and 30% emulsion concentration, while trailed shapes at 40%. Maltodextrin had uniform spherical shapes at 30%, while aggregated form with various kinds of capsule sizes at 40%. Dextran had spherical shapes at 20%, while trailed fibrous shapes at over 30%. Mixed polysaccharides with gum arabic:maltodextrin (1:3, w/w) had uniform spherical shapes at 20%, 30%, and 40% with increasing diameter with increasing concentration.

• Applied Microscopy
• /
• v.29 no.1
• /
• pp.67-73
• /
• 1999

It is practically hard to prepare good TEM specimens from powders which are embedded in epoxy materials for ion milling, because the milling rate difference between powders and epoxy is quite large. In order to overcome this problem, we tried to find methods to increase the density of powders in the embedding epoxy without loosing the adhesive strength between them. Powder density was considerably increased by employing a centrifuge for embedding, compared to the result by a conventional vacuum embedding. In addition, mixing powders of different sizes after sieving also enhanced the final density by allowing smaller particles filling in the gaps of larger particles. Ion milling of powders embedded by these methods resulted in thin specimens good enough for normal TEM works. TEM specimens from spherical, platy and fibrous powders of submicron size were successfully prepared by this centrifuging method.

• The Korean Journal of Oral and Maxillofacial Pathology
• /
• v.42 no.6
• /
• pp.189-198
• /
• 2018

A 31 years old female had been suffered from a bony swelling in right premolar region of the mandible for 12 years, recently grown rapidly. A fistula tract developed on the right anterior mandibular border, but the lesion was relatively asymptomatic. In the radiological examination, the tumor mass was irregularly mixed with radiolucent and radiopaque areas, forming multiple cystic spaces. Under the diagnosis of calcifying odontogenic cyst, the mandibular mass was resected and examined pathologically. After decalcification, the dissected tumor mass showed multiple small cystic spaces and calcifying fibrous tissue, mimicking calcifying odontogenic cyst or ameloblastoma. Histological observation showed many calcifying cementoid materials and ossifying trabeculae. The cystic spaces were turned out to be dilated vascular channels lined by endothelial cells, containing plasma fluid. However, the main lesion was diagnosed as cemento-ossifying fibroma (COF), and the atypical vascular channels were greatly dilated and gradually expanded the whole tumor mass. The present COF was examined through immunohistochemical (IHC) array, and investigated for tumor cell characteristics, exhibiting abnormal ossification and aneurysmal cystic changes. IHC array disclosed that the tumor cells grew progressively in the lack of apoptosis, and that they showed lower expression of RUNX2 than BMP-2, RANKL, and OPG, and increases of protein expression in $HIF-1{\alpha}$, VEGF-A, and CMG2. These data suggested that the reduced expression of RUNX2, osteoblast differentiation factor, be relevant to abnormal ossification of COF, and that the consistent expressions of angiogenesis factors be relevant to de novo angiogenesis in COF, subsequently resulted in aneurysmal cystic changes.