• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.2
• /
• pp.1011-1014
• /
• 2014

Background: Soft tissue sarcomas (STS) represent 1% of all malignant lesions. In this study the authors analyzed the incidence of STS in Vojvodina (the north region of Serbia) in the period from 1985 to 2009. A number of studies conducted worldwide indicate that STS incidence rates are tending to increase. Materials and Methods: On the basis of data from the Cancer Registry of Vojvodina, age standardized STS incidence rates were established as well as their linear trend, with data on histological structure, age, gender and STS distribution at specific locations. Results: The total number of registered patients was 1,308. Average age standardized rate was 1.90/100,000 per year. The investigated period showed a slight increase in the incidence rate (average annual percent increase=0.77%). The most frequent histological type was sarcoma not otherwise specified-NOS (27%), followed by leiomyosarcoma (21%), liposarcoma (14%), rhabdomyosarcoma (11%) and malignant fibrous histiocytoma (9%). The male/female ratio was 0.73:1. Every fifth patient was younger than 39. Conclusions: Comparison among eight international STS epidemiology studies show that the incidence rate range is between 1.4/100,000-5.0/100,000, though our finding is closer to the lower limit. Furthermore, the incidence rate increase was lower than that characteristic for the half of the analyzed studies. A partial explanation for that should be looked for among changes in diagnostic criteria and STS classifications.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.5-14
• /
• 2015

Recently, the use of wood resources has been limited due to global environmental change, like global warming and desertification. It is very critical in Korea's paper industries because lots of virgin pulp are dependant on direct import from abroad for printing grade of paper. In this work, the alternatively best available technique for reducing the import amounts of BKP (bleached Kraft pulp) was considered by mixing DIP (deinked pulp) and TMP (thermomechanical pulp) for the manufacture of high quality paper. Generally known, the sheet prepared from fibrous raw materials of DIP and TMP has lower strength and optical properties than that prepared from BKP. This study was aimed to improve the sheet quality by using DIP and TMP. 4 kinds of polyelectrolytes were approached to find out the best effects on physical strength and optical brightness improvements, and high retention behaviors with GCC (ground calcium carbonate). In conclusion, amphoteric PAM with 1,000,000 molecular weight (g/mol) and 0.5 charge density (meq/g) was best for the improvement of strength properties with the mixture of DIP and TMP. GCC retention rate was also the highest with cationic-PAM of above 2,000,000 molecular weight (g/mol) and about 2.0-3.0 charge density (meq/g) of strengthening agent.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.2
• /
• pp.133-139
• /
• 2003

In order to extend the life time of building and civil infra-structure, nowadays, patch type fibrous composite materials are widely used. Repaired concrete columns and beams gain the stiffness and strength, but they lose toughness and show brittle failure. Usually, the cracks of concrete structures are visible with naked eyes and the status of the structure in the life cycle is estimated with visible inspection. After repairing of the structure, crack visibility is blocked by repaired carbon sheets. Therefore, structural monitoring after repairing is indispensible and self diagnosis method with optical fiber sensor is very useful. In this paper, peel-out effects is detected with optical fiber sensors and the strain difference between main structure and repaired carbon sheets when they separate each other.

• Journal of Fashion Business
• /
• v.19 no.4
• /
• pp.120-134
• /
• 2015

This study aimed to determine the physical properties of silk and nylon fabrics that are treated with persimmon juice in accordance with irradiation time of ultraviolet spectrum. Persimmon juice dyeing has the advantage of using the tannin component of the persimmon. Tannin plays an important role in inhibiting photodegradation of fibers or polymers. Among fibrous materials, silk and nylon are prone to deterioration by light. Hence, this study aimed to reduce these weaknesses of silk and nylon by applying persimmon juice treatment. We accordingly carried out investigation and experiments on ultraviolet irradiation, and physical characteristics of treated fabrics. The persimmon juice treatment process led to increased weight and thickness. In addition, the air permeability of silk fabric was increased, as compared to the control specimen; whereas, that of nylon fabric was decreased. Both drape stiffness and flex stiffness of silk and nylon tended to be high in textiles processed with persimmon juice treatment, as compared to the control textile. Peak load and elongation at peak load of untreated samples clearly decreased in both silk and nylon fabrics with the increase of ultraviolet irradiation time, while those of persimmon juice treated samples increased. Furthermore, ultraviolet blocking ratio measurement indicated that the fabric specimens treated with persimmon juice blocked U.V. spectrum better than the control specimen.

• Korean Journal of Head & Neck Oncology
• /
• v.15 no.2
• /
• pp.172-176
• /
• 1999

Background: An increasing number of traumatic, infectious, degenerative, benign, and malignant lesions of the clivus and cervical spine are treated by head and neck surgeons. Surgical techniques vary according to the exact level of the lesion. Objectives: The purpose of this article are to introduce the surgical approach and to discript our experience and to analyze the advantage of the each methods. Materials and Methods: Transpalatal approach in clivus chordoma, transoral approach in C2 fibrous dysplasia, trans mandibular approach in clivus meningioma and transcervical approach in neulilemmoma were reviewed from the medical record. Results: Postoperative complications occured. Otitis media with effusion were observed in transoral and trans mandibular approach. Cranial nerve paralysis was observed in transcervical approach. But other complications such as swallowing difficulty persisting over 6 weeks, malunion of mandible, orocutaneous fistula, hemorrhage from major vessel were not observed. Conclusion: The various surgical techniques to be described herein serve to give the best exposure of each level of the lesions. Therefore head and neck surgeon plays a major role in the treatment of lesion in the clivus and anterior cervical spine according to the lower incidence of postoperative morbidity.

• Archives of Reconstructive Microsurgery
• /
• v.18 no.2
• /
• pp.67-74
• /
• 2009

Purpose: The etiology and treatment strategy of the anterior interosseous nerve (AIN) syndrome are still controversial. Seven patients with the AIN syndrome who were treated by surgical exploration and neurolysis were reviewed at a mean of 35.9 months follow up period. Materials & Methods: There were six men and one woman. The mean age was 37.3 years, ranging from 26 to 59. No patient was related to trauma and associated neurological lesion. Surgical exploration was performed at 7.7 months after onset of paralysis. Results: All except one patients experienced pain around the elbow region before the onset of the palsy. On 7 patients, only the flexor pollicis longus was paralysed in 1, only the index flexor digitorum profundus in 2, and none had paralysis of the middle. The most common compression structures were fibrous bands within flexor digitorum sublimis arcade. However there was no demonstrable abnormality in three. Recovery was complete in all cases within 12 months after surgery. Conclusion: We recommended surgical exploration and neurolysis in patients who have shown no improvement after 6 months of conservative treatment. And careful preoperative examination is essential to avoid misdiagnosis and inappropriate surgery, especially in incomplete AIN syndrome.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.934-938
• /
• 1995

Water soluble fractions (WSF) of wheat bran treated with thermal processes such as autoclaving, microwaving and extrusion were characterized to investigate the structural response of plant cell wall to thermal and mechanical energy. From the chemical analysis and gel filtration chromatography of WSF, gelatinization of starch was found to be the primary solubilizing mechanism of wheat bran, followed by the structural disintegration of fibrous non-starch cell wall materials. It was also found that extrusion process resulted in degrading relatively higher molecular weight non-starch polysaccharides from the cell wall. GC analysis of water soluble non-starch polysaccharides indicates that the arabinoxylan residues of cell wall are the most susceptible site to thermal treatments studied. In particular, the degrading degree of cell wall of wheat bran is the most significant for extrusion accompanying both high temperature and high shear.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.3
• /
• pp.161-168
• /
• 2011

Purpose: The odontogenic keratocysts demonstrated a high recurrence rate and a biologically aggressive nature. This might be due to unknown factors inherent in the epithelium or enzymatic activity in the fibrous wall. Bcl-2 protein is characterized by its ability to inhibit apoptosis. The aim of this study was to evaluate the expression and distribution of bcl-2 in the OKCs, its possible relationship with the tumorous characteristics, such as the aggressive nature and high recurrence rate, and its usefulness to differentiate OKCs from dentigerous cysts. Materials and Methods: Formalin fixed paraffin-embedded tissue sections of 53 OKCs, and 44 dentigerous cyst were immunohistochemically analyzed quantitatively for the immunoreactivity of the bcl-2 protein with i-solution. Results: More Bcl-2 expression was observed in the OKCs (mean34.387%) than dentigerous cyst (mean11.144%) with statistical significance (P<0.001). Seventeen and 15 of the 32 OKCs in this study showed positivity in the basal layer and basal/suprabasal layers, respectively. In dentigerous cyst, 2 of 3 showed positivity in the basal cell layer. Conclusion: Considering that bcl-2 over expression may lead to the increased survival of epithelial cells, this study demonstrated a possible relationship between the aggressive nature of OKC and the intrinsic growth potential of its lining epithelium. Furthermore, the basal/suprabasal distribution of bcl-2 positive cells was observed in some OKCs, which might have a significant impact on the behavior of cysts. The bcl-2 expression of OKCs can be useful for differentiating OKCs from dentigerous cysts.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.2
• /
• pp.67-72
• /
• 2007

High Pressure Micro Jet (HPMJ) pad conditioning system was investigated as an alternative to diamond disc conditioning in copper CMP. A series of comparative 50-wafer marathon runs were conducted at constant wafer pressure and sliding velocity using Rohm & Haas IC1000 and Asahi-Kasei EMD Corporation (UNIPAD) concentrically grooved pads under ex-situ diamond conditioning or HPMJ conditioning. SEM images indicated that fibrous surface was restored using UNIPAD pads under both diamond and HPMJ conditioning. With IC1000 pads, asperities on the surface were significantly collapsed. This was believed to be due to differences in pad wear rates for the two conditioning methods. COF and removal rate were stable from wafer to wafer using both diamond and HPMJ conditioning when UNIPAD pads were used. Also, HPMJ conditioning showed higher COF and removal rate when compared to diamond conditioning for UNIPAD. On the other hand, COF and removal rates for IC1000 pads decreased significantly under HPMJ conditioning. Regardless of pad conditioning method adopted and the type of pad used, linear correlation was observed between temperature and COF, and removal rate and COF.

• Korean Journal of Food Science and Technology
• /
• v.29 no.4
• /
• pp.693-699
• /
• 1997

The effects of mugwort juice on the gel properties of corn starch (CS), mung bean starch (MS), and potato starch (PS) were investigated. Water holding capacities of three starches were increased with addition of the juice. Solubilities of CS and MS were also increased. Swelling power was increased in CS but decreased in MS. Viscoamylogram showed that 5% addition of the juice lowered the initial gelatinization temperatures of CS and MS, but raised the temperature of PS. While peak viscosities of CS and MS pastes were decreased a little, the viscosity of PS paste was decreased remarkably from 2,280 BU to 845 BU. Addition of mugwort juice did not affect significantly the hardness of starch gels during 7 days of storage at $25^{\circ}C\;and\;4^{\circ}C$. Degrees of gelatinization of the starch gels were affected by addition of the juice, especially in PS, during storage. Freeze-thaw stabilities of three gels were not changed by addition of the juice. The starch gels added with the mugwort juice had smooth surface visually because the crude fibrous materials of mugwort were removed during juice preparation.