• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.2 no.3
• /
• pp.243-255
• /
• 1990

The objective of this study is to present an efficient measurement method of the effective thermal diffusivity for the fibrous insulation material. The non-linear parameter estimation (NPE) method is adapted for this analysis because of its accuracy and its results are compared with those by other direct methods such as CTP, CHP and STD method. A experimental system is constructed with bell-jar vaccum chamber, diffusion pump, tube type furnace, control unit and data acquisition system included with A/D converter and IBM XT/AT personal computer. The typical results obtained from this study are as follows; 1) NPE method can be recommended as an useful and accurate method to measure the effective thermal diffusivity of insuation material because it is shown that the measurement error compared with those by other direct methods is reduced for standard material, NBS-1450b. 2) NPE method can minimize the effects of ill-measured temperature due to external disturbance, because the final value is found by point to point estimating. 3) NPE method dose not depend on the kinds of heat flux, since the surfac temperature are used to estimate the thermal diffusivity. 4) With NPE method, compared with the steady state method, a measuring time and a sample size could be reduced.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.606-611
• /
• 2000

It has been noted that the low frequency absorption coefficient of a porous sample placed in a standing wave tube is affected by the nature of the sample's edge constraint. The edge constraint has the effect of stiffening the solid phase of the sample, which itself can be strongly coupled to the material's fluid phase, and hence the incident sound field, by viscous means at low frequencies. In recent work it has also been shown that such a circumferential constraint causes the low frequency transmission loss of a layer of fibrous material to approach a finite low frequency limit that is proportional to the flow resistance of the layer and which is substantially higher than that of an unconstrained sample of the same material. However, it was also found that the benefit of the circumferential edge constraint was reduced in a transitional frequency range by a shearing resonance of the sample. Here it will be shown that the effect of that resonance can be mitigated or eliminated by adding additional axial and radial constraints running through the sample. It will also be shown that the constraint effect can be modeled closely by using a finite element procedure based on the Biot poroelastic theory. Implications for low frequency barrier design are also discussed.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.2
• /
• pp.220-229
• /
• 2008

Purpose: The present study was aimed to examine the effect of acellular dermal matrix ($AlloDerm^{(R)}$) grafted to the experimental tissue defect on tissue regeneration. Materials and Methods: Male albino rabbits were used. Soft tissue defects were prepared in the external abdominal oblique muscle. The animals were then divided into 3 groups by the graft material used: no graft, autogenous dermis graft, and $AlloDerm^{(R)}$ graft. The healing sites were histologically examined at weeks 4 and 8 after the graft. In another series, critical sized defects with 8-mm diameter were prepared in the right and left iliac bones. The animals were then divided into 5 groups: no graft, grafted with autogenous iliac bone, $AlloDerm^{(R)}$ graft, $AlloDerm^{(R)}$ graft impregnated with rhBMP-2, and $AlloDerm^{(R)}$ graft with rhTGF-${\beta}1$. The healing sites of bone defect were investigated with radiologic densitometry and histological evaluation at weeks 4 and 8 after the graft. Results: In the soft tissue defect, normal healing was seen in the group of no graft. Inflammatory cells and foreign body reactions were observed in the group of autogenous dermis graft, and the migration of fibroblasts and the formation of vessels into the collagen fibers were observed in the group of $AlloDerm^{(R)}$ graft. In the bone defect, the site of bone defect was healed by fibrous tissues in the group of no graft. The marked radiopacity and good regeneration were seen in the group of autogenous bone graft. There remained the traces of $AlloDerm^{(R)}$ with no satisfactory results in the group of $AlloDerm^{(R)}$ graft. In the groups of the $AlloDerm^{(R)}$ graft with rhBMP-2 or rhTGF-${\beta}1$, there were numerous osteoblasts in the boundary of the adjacent bone which was closely approximated to the $AlloDerm^{(R)}$ with regeneration features. However, the fibrous capsule also remained as in the group of $AlloDerm^{(R)}$ graft, which separated the $AlloDerm^{(R)}$ and the adjacent bone. Conclusions: These results suggest that $AlloDerm^{(R)}$ can be useful to substitute the autogenous dermis in the soft tissue defect. However, it may not be useful as a bone graft material or a carrier, since the bone defect was not completely healed by the bony tissue, regardless of the presence of osteogenic factors like rhBMP-2 or rhTGF-${\beta}1$.

• Restorative Dentistry and Endodontics
• /
• v.1 no.1
• /
• pp.26-32
• /
• 1975

After a vital pulpotomy in dogs' teeth, the responses of the remaining pulp tissue under hydroxides (calcium hydroxide, magnesium hydroxide, aluminium hydroxide and zinc hydroxide) were studied histologically. The class V cavities were prepared on the teeth and the pulp was amputated. Each hydroxide was placed over the amputated tissue and the cavity was sealed with zinc oxide eugenol cement. Animals were sacrificed after 3 days, 1, 2, and 3 weeks following the operation. The teeth were decalcified, sectioned and stained with hematoxylin and eosin. Microscopic examination reveals as follows; 1. Calcium hydroxide: Inflammatory change was seen in the superficial portion of the remaining pulp tissue at the 3rd day and 1st week. The incompleted calicified material began to be deposited from the canal wall at the 2nd week, and the advanced calcified material was seen at the 3rd week. 2. Magnesium hydroxide: Severe inflammatory change was seen in the superficial portion of the remaining pulp from the 3rd day and the 1st week samples. Inflammatory change was decreased at the 2nd week and the slight calcified material was deposited from the root canal at the 3rd week. 3. Aluminium hydroxide: Severe inflammatory changes were seen in the remaining pulp tissue, the blood vessel was dilated, and the odontoblasts were destroyed at the 3rd day and 1st week. The fibrous degeneration spread to the apex at the 2nd week. There was no evidence of newly formed odontoblasts or deposition of calcified material underneath aluminium hydroxide. 4. Zinc hydroxide: The micrscopic picture was destructive. A thick necrotic layer was found under the amputated surface at the 3rd day and 1st week. Granulation tissue formation as well as chronic inflammatory changes extended to the apical area in the pulp tissue. Also there were no sign of odontoblastic formation or calcified material at the 2nd and 3rd week.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.669-669
• /
• 2013

Hierarchical N doped TiO2 nanostructured catalyst with micro, meso and macro porosity have been synthesized by a facile self-formation route using ammonia and titanium isopropoxide precursor. The samples were calcined in different calcination temperature ranging from $300^{\circ}C$ to $800^{\circ}C$ at slow heating rate ($5^{\circ}C$/min) and designated as NHPT-300 to NHPT-800. $TiO_2$ nanostructured catalyst have been characterized by physico-chemical and spectroscopy methods to explore the structural, electronic and optical properties. UV-Vis diffuse reflectance spectra confirmed the red shift and band gap narrowing due to the doping of N species in TiO2 nanoporous catalyst. Hierarchical macro porosity with fibrous channel patterning was observed (confirmed from FESEM) and well preserved even after calcination at $800^{\circ}C$, indicating the thermal stability. BET results showed that micro and mesoporosity was lost after $500^{\circ}C$ calcination. The photocatalytic activity has been evaluated for methanol oxidation to formaldehyde in visible light. The enhanced photocatalytic activity is attributed to combined synergetic effect of N doping for visible light absorption, micro and mesoporosity for increase of effective surface area and light harvestation, and hierarchical macroporous fibrous structure for multiple reflection and effective charge transfer.

• Applied Microscopy
• /
• v.25 no.3
• /
• pp.63-74
• /
• 1995

The development of pale chub oocyte from the immature oogonium to mature oocyte was investigated by light and electron microscope. The cytoplasm of pale chub oogonia was acidic and many vesicles were located at inner side of nuclear membrane. In primary oocytes, yolk vesicles were distributed in cytoplasm. Also, fibrous materials and protuberances were distributed on the surface of zona radiata. The nucleus of secondary oocyte was enlarged and yolk vesicles in cytoplasm migrated to zona radiata. In early egg, yolk mass are formed and yolk vesicles were located at inner side of zona radiata. Three-layered zona radiata was about $3{\mu}m$ in thickness. The three layers were an outer fibrous material layer, a middle nurse cell layer in which microvilli of early egg cytoplasm contact with processes of nurse cells, and an inner layer with high electron density. In mature egg, euchromatin and a germinal vesicle were developed, mitochondria, free ribosomes, and yolk mass were distributed in cytoplasm. But, yolk vesicles were disappeared. Specially, zona radiata of matured eggs were better thin than the one of immature eggs In conclusion, it is summerized that the oogenesis of pale chub were the increase of cell size, the formation and accumulation of yolk, the decrease in nucleat electron density, changes of zona radiata, and the development of microvilli.

• Journal of Korean Society on Water Environment
• /
• v.24 no.6
• /
• pp.801-805
• /
• 2008

A fibrous material (p-phenylene-2,5-benzobisoxazole, PBO) was used as an adsorbent for solid phase extraction in order to simplify the extraction procedure. The extraction performance for di-(2-ethylhexyl) phthalate (DEHP) was examined with two types of PBO fibers (HM (High modulus) and AS (Regular type) types) by batch type sorption/desorption experiments. When 100 mg of the HM fibers were applied to 20 mL of the aqueous DEHP solution (less than $50{\mu}g/L$), more than 95% of DEHP was adsorbed on the fibers, however, the AS type fibers adsorbed alkyl phthalate up to 80%. In the case of $50{\mu}g/L$ of the initial concentration of DEHP, the adsorbed DEHP was extracted effectively with methanol and the maximum overall recovery ratio was 92.3%. The results indicated that the PBO fibers could be used as an adsorbent for alkyl phthalate analysis, and that the extraction procedure was not affected by suspended solids in a water sample.

• Restorative Dentistry and Endodontics
• /
• v.26 no.2
• /
• pp.111-120
• /
• 2001

Calcium hydroxide pastes is widely used in conventional endodontics. Along with the expanded clinical use of calcium hydroxide, literatures suggest mixing calcium hydroxide with other substance. Among added substances the vehicle plays the most importance role in the overall process because it is directly related with the velocity of ionic dissociation of $Ca^{2+}$ and OH ion. In this study, we evalutated and compared periapical tissue response and root resorption after canal was filled with mixture of saline and calcium hydroxide(Junsei Chemical Co.. Japan) as a aqueous vehicle, Metapaste(Meta Co., Korea) as a viscous vehicle paste, Vitapex(Neo Dental, Japan) as a oily vehicle paste and IRM(Caulk Dentsply, USA) in replantation of rat molar. A total of 31 maxillary first molars of Sprague-Dawley female rats, 30 days old were used. The upper 1st molar was extracted and the mesiobuccal canal was filled with mixture of saline and calcium hydroxide, Metapaste, Vitapex. IRM and then replanted. Rats were sacrificed 3 weeks after replantation. the maxillae were removed. section of 4 micron were cut and stained with hematoxylin-eosin, Apical tissue response were observed under light microscope. The results were as follows: 1. Saline mixing group and Metapaste group were significant different in fibrous capsule width compared to Vitapex group and IRM group(P<0.05). 2. Saline mixing group. Metapaste group. Vitapex group and IRM group did not prevent root resorption and there were no statistical difference. 3. In saline mixing group and Metapaste group. loss of pastes were observed in all samples. From the results of our study. we observed loss of pastes in saline mixing group and Metapaste group because of water soluble property and assumed it was related to inflammation in apical area and sealing ability of material. So, we should study and develop calcium hydroxide vehicle which is easily removed and more stable and because of only 3 weeks observation we need more evaluation in long period.

• Clean Technology
• /
• v.21 no.4
• /
• pp.257-264
• /
• 2015

Conventional physicochemical technologies for algae growth inhibition have economical and environmental pollution problems. This study attempted to overcome the problems by nature-friendly biological inhibition technology using fibrous carrier. The experimental results showed that the most effective carrier material, polyester, exhibited the highest biofilm thickness. The removal efficiency for nutrient salts, such as nitrogen and phosphorous, and algae growth inhibition of polyester carrier was 14.59%, 6.36%, and 77%, respectively, which is higher than for control group. These result indicate that the polyester carrier is available in eutrophic lake.

• Structural Engineering and Mechanics
• /
• v.17 no.3_4
• /
• pp.347-356
• /
• 2004

In order to extend the lifetime of buildings and civil infrastructure, patch type fibrous composite retrofitting materials are widely used. Retrofitted concrete columns and beams gain stiffness and strength, but lose toughness and show brittle failure. Usually, the cracks in concrete structures are visible to the naked eye and the status of the structure in the life cycle is estimated through visual inspections. After retrofitting of the structure, crack visibility is blocked by retrofitted composite materials. Therefore, structural monitoring after retrofitting is indispensable and self diagnosis method with optical fiber sensors is very useful. In this paper, we try to detect the peel out effect and find the strain difference between the main structure and retrofitting patch material when they separate from each other. In the experiment, two fiber optic Bragg grating sensors are applied to the main concrete structure and the patching material separately at the same position. The sensors show coincident behaviors at the initial loading, but different behaviors after a certain load. The test results show the possibility of optical fiber sensor monitoring of beam structures retrofitted by the composite patches.