• Journal of the Optical Society of Korea
• /
• v.17 no.1
• /
• pp.57-62
• /
• 2013

We have numerically implemented a receiver side all-optical signal processing method, i.e. optical backward propagation (OBP), by dispersion compensating fiber (DCF) and non-linear compensator (NLC) devised by effective negative Kerr non-linear coefficient using two highly non-linear fibers (HNLFs). The method is implemented for the post-processing of fiber transmission impairments, i.e. chromatic dispersion (CD) and non-linearities (NL). The OBP module is evaluated for dual-polarization (DP) m-ary (m=4,16,32,64,256) quadrature amplitude modulation (QAM) in 112 Gbit/s coherent transmission over 1200 km standard single mode fiber (SMF). We have also investigated an intensity limited optical backward propagation module (IL-OBP) by using a self-phase modulation-based optical limiter with an appropriate pre-chirping to compensate for the intensity fluctuations in the transmission link. Our results show that in highly non-linear sensitive 256QAM transmission, we have observed a 66% increase in the transmission distance by implementing IL-OBP as compared to conventional OBP.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2191-2194
• /
• 2008

This paper investigates the sound insulation performance of the fiber sandwich panels for a tilting train. Due to the high strength and low mass, fiber sandwich panels are widely used for aircraft structures, railway vehicle structures. These fiber sandwich panels show orthotropic behavior because of the fiber's structural characteristics. This orthotropy often reduces the critical frequency and makes negative effect on the sound insulation performance. In this study, transmission loss of the fiber panels is analyzed based on the equivalent orthotropic plate model. An analysis program is developed to calculate the transmission loss of the fiber sandwich panels. Using the program, the coincidence frequency ranges and their effects on the transmission loss are investigated.

• Journal of the Optical Society of Korea
• /
• v.15 no.2
• /
• pp.132-139
• /
• 2011

We investigate theoretically the combined effect of fiber chromatic dispersion and self-phase modulation (SPM) on multi-channel subcarrier multiplexed (SCM) optical transmission systems in terms of the detected RF carrier power and SPM-induced power gain after transmission over single-mode fiber (SMF) links. According to the calculated power gain due to the SPM effect at the transmission distance of P3dB using the detected radio-frequency (RF) carrier power after photo-detection, the power gain is significantly degraded with large optical modulation index (OMI), small SCM channel spacing, and large fiber launching power because of the increased interaction between subcarrier channels. The nonlinear phase shift due to linear and nonlinear fiber characteristics is investigated to explain these results in detail. The numerical simulation results show that the OMI per SCM channel has to be smaller than 10 % for the fiber launching power of 10 dBm to guarantee prevention of SPM-induced power gain degradation below 0.5 dB for the SCM system with the channel spacing of 100 MHz. This result is expected to be utilized for the optical transmission systems using the SCM technology in future radio-over-fiber (RoF) networks.

• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.32-37
• /
• 2011

In dispersion management (DM) and optical phase conjugation applied into optical transmission links with multi fiber spans for minimizing the impact of nonlinearity and group velocity (GVD), implementation possibility of DM using only one fiber span for pre- or postcompensation was assessed as a function of duty cycle of RZ pulse and residual dispersion per span (RDPS). It is confirmed that DM with optimal net residual dispersion (NRD) controlled by only one fiber span could be sufficiently applied into optical transmission links, though optimal NRD is more increased than that in transmission links with the general DM scheme of pre- and postcompensation. Thus, it is expected that optical transmission system is simply designed and implemented by applying the proposed DM scheme into real optical transmission links. Also, it is confirmed that the advantageous duty cycle of RZ is 0.5 and RDPS is setting to be small value for the effective transmitting wide signal wavelength range in optical links with optimal NRD controlled by only one fiber span.

• Journal of information and communication convergence engineering
• /
• v.19 no.4
• /
• pp.199-204
• /
• 2021

We propose a dispersion-managed link with a non-midway optical phase conjugator (OPC), in which the residual dispersion per span (RDPS) of each fiber span is different for each transmission section before and after OPC. We numerically demonstrate the compensation for 960-Gb/s wavelength-division multiplexed (WDM) signals distorted by chromatic dispersion and Kerr nonlinearity of the fiber. We consider different cases for non-midway OPC, including six fiber spans - OPC - 14 fiber spans and 14 fiber spans - OPC - 6 fiber spans. The numerical results show that the compensation of the distorted 960 Gb/s WDM is more efficient when the OPC is placed after 6-th fiber span as compared to after the 14-th fiber span. Our simulation results also indicate that the compensation effect increases when the difference in net residual dispersion between both transmission sections is not large, but they are not the same. Under this condition, the larger the magnitude of the RDPSs of each fiber span, the greater the compensation.

• ETRI Journal
• /
• v.9 no.2
• /
• pp.24-35
• /
• 1987

A Design and Fabrication of 565 Mbit/s Optical Fiber Transmission Link We calculated the transfer functions of optical channel components and formulated the optimum transfer function of optical receiver for optical transmission to show a design rule of fiber optical link for digital transmission. And we evaluated various causes of sensitivity degradation to determine the receiver specification. Also we fabricated and demonstrated a 565Mbit/s single mode fiber optic link, 27km, to show the practicality of designed fiber optic link. The output power of the transmitter was above -3dBm, and the sensitivity of the optical receiver was -37.8dBm which is the same value we expected. Also the dynamic range was more than 25dB.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.5
• /
• pp.1-6
• /
• 2011

By incorporating a polarization-diversity loop configuration (PDLC), we have demonstrated inline conversion between transmission and reflection spectra of a fiber Bragg grating (FBG) without reconfiguration of the fiber filter structure. The proposed apparatus consists of a polarization beam splitter, an FBG, and two quarter-wave plates (QWP's). The inline conversion operation between transmission and reflection spectra of the FBG was performed by proper adjustment of QWP's within the proposed filter. The band rejection ratio and side-mode suppression ratio in transmission and reflection modes of the fabricated filter were measured as ~17.0[dB] and ~16.4[dB], respectively.

• Journal of the Optical Society of Korea
• /
• v.14 no.4
• /
• pp.351-356
• /
• 2010

We investigated the combined effect of fiber chromatic dispersion and self-phase modulation (SPM) in multi-channel subcarrier multiplexed (SCM) optical transmission systems. We theoretically analyzed the transmission characteristics of the SCM signals with the effect of SPM and chromatic dispersion in a single-mode optical fiber by numerical simulations based on the nonlinear Schrodinger equation. The numerical simulation results revealed that the effect of fiber dispersion and SPM could occur independently between subcarrier channels in two-channel SCM systems for small optical modulation index (OMI) and large channel spacing. However, for large OMI, small channel spacing, and large fiber launching power, we found a performance degradation of the two-channel system compared to that of a single-channel system. These parameters are therefore important for the optimization of multi-channel SCM systems applicable to radio over fiber networks.

• Journal of the Optical Society of Korea
• /
• v.2 no.1
• /
• pp.22-25
• /
• 1998

We present a spectrum broadening technique to improve the signal-to-noise ratio of spectrum sliced incoherent light sources using the fiber four-wave mixing effect which occurs in a nonlinear loop mirror located at the receiver. The initial transmission channel bandwidth of 0.92 nm was increased to 1.62 nm in the nonlinear loop mirror at the optical receiver, which enhances the signal-to-noise ratio to a desired value. Using this technique, we have demonstrated the transmission of a 2.5 Gb/s NRZ signal with the 0.92 nm bandwidth through a 80 km dispersion-shifted fiber. The measured transmission penalty was less than 0.2 dB at $1{\imes}10^{-10}$ BER.

• Journal of the Optical Society of Korea
• /
• v.12 no.3
• /
• pp.152-156
• /
• 2008

This paper reports a fiber-optic temperature sensor using a single mode fused fiber coupler incorporating a thermo-optic external medium. The spectral transmission was altered by changing the refractive index of the external thermo-optic medium. A theoretical and experimental investigation was carried out with the aim of achieving high sensitivity. The measured sensitivity for the environmental temperature was as high as -1.5 $nm/^{\circ}C$.