• 대한전자공학회논문지TC
• /
• 제40권10호
• /
• pp.35-42
• /
• 2003

본 논문에서는 광 버스트 교환 방식에서 사용되는 제어 패킷 처리 시간 보상 기법 및 자원 예약 기법을 분류하고 다중 홉 환경에서 대표적인 예약 방식인 OT/DR (Offset Time/Delayed Reservation) 기반 JET(Just-Enough-Time) 방식의 문제점인 Path length priority effect를 분석하였다. 그리고, 이러한 문제점을 해결하면서 입력 FDL(Fiber Delay Line)을 사용하여 홉 단위로 우선 순위를 증가시켜 종단간 수율을 개선시킬 수 있는 FDL/DR 방식 기반의 홉 단위 우선 순위 증가 기법을 제안하고 시뮬레이션을 통하여 성능을 비교 분석하였다. 시뮬레이션을 통한 성능 분석 결과 제안된 방식은 다중 홉 환경에서 path length priority effect로 인해 발생하는 기존 방식의 문제점을 개선하여 종단간 성능이 향상됨을 알 수 있었다.

• International Journal of Aerospace System Engineering
• /
• 제1권1호
• /
• pp.29-33
• /
• 2014

A displacement measurement system that uses fiber-optical common-path interferometry has been developed. The system includes fiber-optic devices and a collimator attached to a linear translation stage. The interferometry effect was detected with a photodetector whose signal was measured on an oscilloscope. Experiments showed that vibration of the stage disturbed the signal by causing nanoscale interference. Under stable conditions, the measured distance was the almost the same as the value calculated from the linear translation stage parameters.

• Journal of the Optical Society of Korea
• /
• 제13권4호
• /
• pp.439-444
• /
• 2009

Accurate evaluation of polarization characteristics in the integrated optic chip (IOC) for interferometric fiber optic gyroscope was performed. Spatial distribution of optical wavetrains caused by the polarization parameters such as local polarization cross-coupling and polarization rejection coefficient of the IOC were measured utilizing the path-matched optical coherence domain polarimetry (PM-OCDP). With the analytic model deduced from Jones matrix representation, we could accurately identify the polarization characteristics of the IOC. Both degree of measurement error due to the imperfect equipment conditions in PM-OCDP and birefringence of IOC chip were also characterized.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.282-289
• /
• 2010

A simplified, practical vector network analyzer (VNA) that uses mature radio-over-fiber technology has been designed and demonstrated. The measurement concept allows the full S-parameters of a microwave device (or antenna) to be obtained while minimizing the detrimental effects of electrical cables, which are replaced with a photonic link. A variety of high-frequency light modulation schemes with frequency sweeping capabilities are presented to realize a one-path (single, forward), frequency-multiplied optical link for VNA applications. Using the photonic one-path link, full two-port S-parameters have been extracted based on five-term error modeling, which has half the error terms compared with the standard duplex configuration. The S-parameters of a microwave filter and antenna measured using frequency-multiplied optical links are found to be in good agreement with those obtained using a conventional VNA.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.258-263
• /
• 1999

In this study, the numerical and experimental investigations were conducted to understand ultrasonic wave propagation and to evaluate the degree of fiber waviness in thick composites nondestructively. The path, energy and traveling time of insonified wave were predicted by adopting the ray and plane wave theories. In the analysis, the composites were assumed to have continuous fiber with sinusoidal waviness in a matrix and were modeled as stacks of infinitesimally short length off-axis elements with varying fiber orientation along the length direction. From the experiments on the specially fabricated thick composite specimens with various degrees of uniform fiber waviness, the energy distributions of received wave were obtain for the various positions of transmitter. It was observed that the energy of wave was converged to the adjacent peaks of fiber waviness. The location where maximum energy of wave was detected from the experiments showed good agreement with the location obtained from theoretical predictions. Finally, the test procedure was Proposed to evaluate fiber waviness in thick composites by considering the energy of wave and relative distance between transmitter and receiver.

• 한국항행학회논문지
• /
• 제7권1호
• /
• pp.14-21
• /
• 2003

장거리 $3{\times}40$ Gbps 강도 변조 직접 검파 방식의 파장 분할 다중 시스템에서 색 분산과 자기 위상 변조에 의한 광 펄스 왜곡을 최상으로 보상할 수 있는 최적의 펌프 전력을 컴퓨터 시뮬레이션을 통해 살펴보았다. 본 논문에서 고찰한 파장 분할 다중 시스템은 전체 전송로 중간에 HNL-DSF (highly nonlinear dispersion shifted fiber)의 광 위상 공액기를 두어 광 신호 왜곡을 보상하는 경로 평균 강도 근사 (PAIA : Path-Averaged Intensity Approximation) 기법의 MSSI (Mid-Span Spectral Inversion)가 적용된 시스템이다. 우선 HNL-DSF는 광대역 파장 분할 다중 전송에서 매우 유용한 비선형 매질이라는 것을 확인할 수 있었고, 두 번째 광 전송로로 입사되는 공액파의 전력을 입력 광 신호의 전력과 같아지게 하는 HNL-DSF 광 위상 공액기의 펌프 전력에서 최상의 보상이 얻어지는 것을 확인할 수 있었다. 결과적으로 PAIA MSSI 기법에 전송 거리에 관계한 최적 펌프 전력을 갖는 HNL-DSF 광 위상 공액기를 적용하면 장거리 대용량 파장 분할 다중 시스템의 구현이 가능하다는 것을 확인할 수 있었다.

• Smart Structures and Systems
• /
• 제11권2호
• /
• pp.185-197
• /
• 2013

We developed a simultaneous strain measurement and damage detection technique using a pair of surface-mounted piezoelectric transducers and a fiber connecting them. This is a novel sensor configuration of the fiber acoustic wave (FAW) piezoelectric transducer. In this study, lead-zirconate-titanate (PZT) transducers are installed conventionally on a plate's surface, which is a technique used in many structural health monitoring studies. However, our PZTs are also connected with an optical fiber. A FAW and Lamb wave are simultaneously guided in the optical fiber and the structure, respectively. The dependency of the time-of-flight of the FAW on the applied strain is quantified for strain sensing. In our experimental results, the FAW exhibited excellent linear behavior and no hysteresis with respect to the change in strain. On the other hand, the well-known damage detection function of the surface-mounted PZT transducers was still available by monitoring the waveform change in the conventional Lamb wave ultrasonic path.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.183-184
• /
• 2023

The purpose of this study is to compare and analyze the effect of type and volume fraction of fiber on the electrical conductivity and shielding effectiveness of cementitious composites. The large specific surface area of amorphous metallic fiber, as well as the high number of fibers per unit weight, provided an advantage in the formation of conductive path. As the result, the electrical conductivity of amorphous metallic fiber was evaluated to be higher, and the shielding effectiveness was also higher. However, the shielding effectiveness according to electrical conductivity was confirmed to have a threshold point, and further research is needed to improve it.

• 제어로봇시스템학회논문지
• /
• 제13권3호
• /
• pp.210-217
• /
• 2007

The theoretical formulations are derived for calculating optical power change for intensity modulated fiber optical microphone. The optical power change is due to optical paths, misalignment and geometry of optical coupler. Based on the theoretical equations, three different optical couplers are simulated with respect to several angles of optical couplers. In order to evaluate the formulation, a multi-mode to multi-mode coupler which is one of abovementioned optical couplers is designed and characterized by carving out both static experiments and dynamic experiments. Considering experimental results, this paper conclude that the theoretical formulations is very useful for design optical coupler and this kind of fiber optic sensor is adequate to microphone.

• 한국통신학회논문지
• /
• 제25권9B호
• /
• pp.1534-1541
• /
• 2000

광섬유고리에 편광제어를 통해 여러 광경로들에 대해서 손실을 조정함으로써 손실이 작은 광경로에서 발진하게 함으로써 발진 파장을 가변시킬 수 있는 편광제어 파장가변 고리형 광섬유레이저를 구현하였다. 1.5mm의 공극을 가진 내부공진편광기를 사용하여 1nm의 종모드간격으로 발진을 일으킬 수 있었고 편광제어기 및 내부공진편광기를 조절해서 1540!1560 nm의 파장가변을 시킬 수 있었다. 또한 실험적으로 나타난 발진특성을 광경로와 복굴절 손실의 개념을 사용하여 발진출력의 파장천이특성을 분석하였다.