• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.675-689
• /
• 2019

Development of smart construction materials with both self-strain and self-damage sensing capacities is still difficult because of little information about the self-damage sensing source. Herein, we investigate the effects of the matrix strength, fiber geometry, and fiber content on the electrical resistivity of steel-fiber-reinforced cement composites by multi-fiber pullout testing combined with electrical resistivity measurements. The results reveal that the electrical resistivity of steel-fiber-reinforced cement composites clearly decreased during fiber-matrix debonding. A higher fiber-matrix interfacial bonding generally leads to a higher reduction in the electrical resistivity of the composite during fiber debonding due to the change in high electrical resistivity phase at the fiber-matrix interface. Higher matrix strengths, brass-coated steel fibers, and deformed steel fibers generally produced higher interfacial bond strengths and, consequently, a greater reduction in electrical resistivity during fiber debonding.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.3
• /
• pp.15-22
• /
• 2008

Properties of pulp fibers can be modified by LbL multilayering technology. We evaluated the effect of stock composition on the polyelectrolyte multilayering performance of pulp fibers in this study. Stock composition was varied with pulp type and fines content. Three types of pulp-Hw-BKP, BCTMP and KOCC-were treated with polyelectrolytes of poly-DADMAC and PSS. Fines content of stock were controlled at 0, 10, 20, 30, and 40%. Zeta potential of pulp fibers and charge demand of filtrate were evaluated. The highest adsorption ratio was obtained for BCTMP because of its shortest fiber length and highest specific surface area. Higher fines content in the stock increased the adsorption ratio of polyelectrolyte onto pulp fiber and it required a higher amount of polyelectrolyte for charge neutralization. For the pulp stock with higher fines content, a higher level of polyelectrolyte and the increased layer number were required to modify and stabilize the electrochemical properties of pulp fibers.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.4
• /
• pp.619-624
• /
• 2012

In this study, MMT/fiber/polymer composites were fabricated by impregnating chopped strand glass mat into a vinylester resin mixed with clay. Tensile tests has been performed by using a universal testing machine to determine the effect of MMT addition on the tensile properties of MMT/chopped strand glass fiber/vinylester composites. And some pictures which are magnified cross section of breaking parts are has been taken by using a FE-SEM to confirm the behavior at breaking. The contents ratio of MMT applied in the composites were 0.5, 1.0, 1.5, and 2.0 wt% respectively. It has been found that the tensile strength and elastic modulus of MMT/chopped strand glass fiber/vinylester composites were improved at a proper content of MMT. Tensile strength and elastic modulus were maximized at a content of 1.0 wt% due to most effective dispersion of MMT. On the contrary, the failure strain was increased as MMT content was increased.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.4
• /
• pp.509-514
• /
• 1993

The experiment was conducted to determine the effect of different fiber levels on milk production of crossbred Holstein milking cows fed urea-treated rice straw (UTS) as a roughage. Eight cows were allotted into 2 squares of 4 cows each with 4 treatments by a balanced design. The treatments were 17%, 22%, and 24% crude fiber (CF) diets and Thai feeding system (free choice of roughage and 1 kg of concentrates/2 kg of milk) as a control. Body weight change was not significantly different among the treatments during the experiment. Milk production (4% FCM) and milk protein content wee not different among the treatments, but milk fat content was low in the 17% CF group and high in the control group. Cows fed the 17% CF diet consumed less UTS and more concentrates than the others, and consequently total DM intake was not different among the treatments. The feed conversion ratio was significantly higher in the control. Feed cost per kg milk was lowest in the control and highest in the 17% CF diet. The fiber content of the diet would be more than 17%, preferably 22-24% for normally producing Thai crossbred Holstein cows when the UTS was fed as a main roughage source.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.75-81
• /
• 2003

To investigate the reinforcing effect of subsurface layers of marine dredged clay(DMC) mixed with the micro-fiber(MF), a series of laboratory tests were performed on the DMC specimens with and without MF through uniaxial and triaxial compression tests. For the test programme, the elapsed time after dredging of marine clay, mixing rate and length of MF, and curing time of the composite were chosen as the important factors affecting the strength behaviour. The strength of the DMC mixed with MF and waste lime(WL) used for the admixture was found to be enhanced with the increasing content and length of MF, and with decreasing water content of DMC. MF and WL were applied as materials for trafficability improvement of the very soft reclaimed ground by DMC.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.4
• /
• pp.7-12
• /
• 1994

In recent years, the municipal wastes recognized resources. This study was performed to survey the changes of main components of the pretreated(chemical, physical) lignocellulosic biomass. The result can be summerized as follows; In pulp fiber composition, newsprint and corrugating container were mainly consist of softwood fiber(tracheid). But computer print out and magazine had a large amount of hardwood fiber(wood fiber). And, carbohydrate content in the various lignocellulosic biomass increases as the following orders : Magazine < Newsprint < Corrugating container < Computer print out. In the chemical pretreatments for the delignification, sodium hypochlorite pretreatment was more effective than sodium hydroxide. By washing, ash content of lignocellulosic biomass was decreased. Physical pretreatments were less effective than chemical pretreatment for the delignification. On the other hand, in physical pretreatments, ash content of lignocellulosic biomass was the same tendency as in the chemical pretreatments.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.63-66
• /
• 2007

This study investigates the fire resistance properties of high strength concrete, around 60MPa class, designed with various admixture types and fiber content. Test showed that the increase of fiber content decreased the fluidity and slightly inclined the air content of fresh concrete. However, the fiber content in concrete did not affect the compressive strength. For the addition of admixture, specimens adding the shrinkage-reducing-agent (SR) indicated the strength value at 70MPa, which is followed by incorporating silica fume (SF) at 66MPa, the combination of expansive admixture (EA) and SR at 63MPa, only EA at 59MPa, blast furnace slag (BS) at 58MPa and fly ash (FA) at 50MPa in an order. After completing the fire test, all specimens adding 0.05vol.% of polypropylene fiber exhibited protection of spatting, except for the specimens incorporating loft of SF and incorporating 20% of SF with only SR and the combination of EP and SRA, respectively. Therefore the most effective result of this study was shown in the specimens incorporating love of FA and 30% of BS and incorporating 20% of SF with 5 % of EA. It is expected that this test results will be crucial references in near future to develope the spatting resistance method of high strength concrete.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.128-129
• /
• 2014

In this study, flowability of the mortar added with length change and combination of steel and inorganic fiber has been tested to evaluate the performance of fiber-reinforced mortar. The following results could be made as the conclusion. Early age flow of the mortar has been decreased when fibers added. Slump also decreased with the adding of fibers. For the air content, comparing with Plain, all the specimens with fibers showed higher air content than Plain., Addition of every kinds fibers showed the similar EIS test results.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.136-142
• /
• 1999

The injection molded part shrinks in the process of solidification by the amount of the coefficient of linear thermal expansion multiplied by the temperature difference between the coefficient of linear thermal expansion multiplied by the temperature difference between the room temperature and the temperature at which the solid structure is formed in the mold And it is called warpage for this type of deformation that shrinkage are not uniform throughout the injection molded part. To predict warpage phenomena in the articles the results obtained theoretically from the change of mold temperature fiber content of composites have been compared with exsperimental results.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.477-480
• /
• 2006

In this study, evaluation of fire-resistant performance for polypropylene fiber-mixed mortar was performed to establish specification for stability of tunnel structure against fire afterward. In the fire-resistant performance test with mix proportion of polypropylene fiber, cracks were observed for mortar under 0.15% of fiber content, but micro-cracks were remarkably reduced for mortar more than 0.2% of fiber content. From the results, we are concluded that optimal mix proportion of polypropylene fiber is $0.20{\sim}0.25%$.