• Animal Bioscience
• /
• 제36권10호
• /
• pp.1568-1577
• /
• 2023

Objective: A study was conducted to determine the chemical composition of banana meal and rice bran from Australia or South-East Asia and test the hypothesis that there are no differences in rice bran produced in different countries, but there are differences between full-fat and defatted rice bran. Methods: Two sources of banana meal and 22 sources of rice bran (full-fat or defatted) from Australia or South-East Asia were used. All samples were analyzed for dry matter, gross energy, nitrogen, amino acids (AA), acid hydrolyzed ether extract (AEE), ash, minerals, total starch, insoluble dietary fiber, and soluble dietary fiber. Banana meal was also analyzed for sugars including glucose, fructose, maltose, sucrose, stachyose, and raffinose. Results: Chemical analysis demonstrated that banana meal from the Philippines is primarily composed of starch. Full-fat rice bran from Australia had greater (p<0.05) concentrations of AEE, lysine, and glycine than samples from the Philippines and Vietnam. Full-fat rice bran from Australia and Thailand had greater (p<0.05) concentrations of gross energy and most AA than rice bran from Vietnam. Full-fat rice bran from Australia had greater (p<0.05) concentrations of tryptophan and manganese than all other sources, but full-fat rice bran from the Philippines contained less (p<0.05) zinc than all other sources of rice bran. Gross energy, AEE, and copper were greater (p<0.05) in full-fat rice bran compared with defatted rice bran, but defatted rice bran contained more (p<0.05) crude protein, ash, insoluble dietary fiber, total dietary fiber, AA, and some minerals than full-fat rice bran. Conclusion: Banana meal is a high-energy source that can be used as an alternative ingredient in livestock diets. Full-fat rice bran from Australia and Thailand contained more concentrations of AEE and AA than samples from the Philippines or Vietnam. Full-fat rice bran had more gross energy and AEE than defatted rice bran, whereas defatted rice bran contained more crude protein, ash, and total dietary fiber.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권11호
• /
• pp.1598-1603
• /
• 2000

Broiler litter can be used as a feedstuff for ruminants. Fifty seven litter samples collected from 47 farms in Kyungkee Province of Korea were analyzed to assess the effects of type and amount of bedding (rice hulls vs. sawdust), season (winter vs. summer) and drinkers (bell- vs. trough-type) on composition of broiler litter. Rearing conditions of broilers were also surveyed from the farms to estimate annual production rate of litter. Nutrient composition of broiler litter varied widely and moisture and ash concentrations were higher than observed by other researchers. Ash concentration was higher (p<0.05) for samples taken in winter than in summer and higher (p<0.05) in the rice hulls- than in the sawdust-based litter both in winter and summer. Only minor differences in litter composition were noted between drinkers. Ash was negatively correlated with crude protein and neutral detergent fiber (p<0.01), and acid detergent fiber (p<0.05). The estimated litter production rate was 2.7 kg per bird per flock on a wet basis (60% DM) and the annual production rate was 12.7 kg per bird per yr (60% DM). Therefore, the 42 million broilers per month grown in Korea in 1999 produced a total of 533,400 metric tons of litter.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권10호
• /
• pp.1427-1432
• /
• 2015

The experiment was conducted to determine nutritive values of caramba (Lolium multiflorum cv. caramba) fresh, silage and hay by in vivo and in vitro methods. There was a statistically significant difference (p<0.01) in crude protein content value between fresh caramba (12.83%) and silage (8.91%) and hay (6.35%). According to results of experiment, the crude fiber, neutral detergent fiber, acid detergent fiber (ADF), acid detergent lignin contents of the three forms of caramba varied between 30.22% to 35.06%, 57.41% to 63.70%, 35.32% to 43.29%, and 5.55% to 8.86% respectively. There were no significant differences between the three forms of caramba in digestibility of nutrients and in vivo metabolizable energy (ME) values (p>0.05). However, the highest $ME_{CN}$ (ME was estimated using crude nutrients) and $ME_{ADF}$ values were found in fresh caramba (p<0.01). As a result, it could be said that, there were no differences between the three forms of caramba in nutrient composition, digestibility and ME value, besides drying and ensiling did not affect digestibility of hay. Consequently, caramba either as fresh, silage or hay is a good alternative source of forage for ruminants.

• 펄프종이기술
• /
• 제36권1호
• /
• pp.24-29
• /
• 2004

Alkaline cellulolytic enzymes from cultured medium of Coprinus cinereus 2249 were purified with gel and ion-exchange chromatography and characteristics of those enzyme proteins were investigated. A fiber length distribution and a crystallinity of cellulose and sugar composition of enzyme treated Mixed Office Wastepaper(MOW) and Unbleached Kraft Pulp(UKP) were analysed. The conclusion could summarized as follows; \circled1 Alkaline and acidic, endo- and exo-glucanases were purified from cultured medium of Coprinus cinereus 2249. \circled2 The approximate molecular weight of alkaline endo-glucanase was 42 kDa, and also that of alkaline exo-glucanase was 50 kDa. A fiber length distribution and a crystallization of cellulose and sugar composition of enzyme treated MOW and UKP were not so much changed with original paper and pulp.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.309-316
• /
• 2021

Due to the rigid nature of the silicon carbide fiber(SiC), fiber damage occurs from the friction during the carding process. This damage not only lowers the spun yarn yield, but also lowers the heat resistance of the spun yarn, so that ultra-high heat resistant yarn cannot be manufactured. Therefore, in the carding process where the most friction between fiber and machine(wire, etc.) occurs, some factors were modified and tested, and as a result of measuring the change in physical properties, fiber damage decreased due to the wire angle or wire density, resulting in improved yield. The test method used to measure the yield of SiC fiber was the carbonization method, and the content of SiC fibers was calculated using the remaining amount after carbonization. Carbonization test was performed at air condition, 700℃, and for 2 hours. Analysis by SEM-EDX showed that the carbide was consistent with the composition of the SiC fiber.

• 한국식품과학회지
• /
• 제21권2호
• /
• pp.269-275
• /
• 1989

현율무, 율무쌀, 율무겨 그리고 현염주를 시료로 하여 일반성분, 총 식이섬유 함량, acid detergent fiber 함량, lignin 함량, 수분 결합력, 아미노산 조성 및 중성지질 조성 등을 살펴보았다. 그 결과, 율무쌀의 총 식이섬유량은 2.70% 였고, 현율무는 3.86% 였으며 현염주는 4.33% 그리고 율무겨는 13.12%였다. Acid detergent fiber 양은 율무쌀이 1.81%로 가장 낮았고 현율무, 현염주는 각각 3.45%, 3.26%로 비슷한 값이었다. 율무겨에서 추출한 총 식이섬유와 acid detergent fiber 의 수분 결합력을 측정하여 비교한 바 총 식이섬유의 수분 결합력은 $2.63{\pm}0.02g\;H_2O/g\;TDF$로 매우 낮았고, acid detergent fiber의 수분 결합력은 $5.89{\pm}0.152g\;H_2O/g\;ADF$였다. 율무쌀, 현율무, 현염주 그리고 율무겨의 아미노산 조성은 glutamic acid 함량이 가장 높았고 다음이 leucine 이었으며, 율무쌀의 경우 leucine 의 chemical score는 189로 매우 높았으며 반면에 lysine의 chemical score는 22-32 사이로 매우 낮아 율무, 염주의 제한 아미노산이 되었다. 지질성분은 중성지질이 80.89%-96.55% 범위로 대부분을 차지했고, 당지질이 2.35%-7.48% 사이로 현염주의 당지질 함량이 가장 낮았다. 인지질은 함량이 매우 낮아서 1.10%-2.12% 범위였다. 각 지질 성분의 지방산 조성은 palmitic acid, oleic acid 그리고 linoleic acid 였으며 현염주를 제외하고는 조성상에 크게 차이가 나지 않았다.

• 동아시아식생활학회지
• /
• 제9권1호
• /
• pp.74-80
• /
• 1999

The proximate composition, pH, vitamins and minerals in sunflower seed sprout were investigated to furnish basic data for utilization in health food or processed food. The pH of sunflower seed sprout was 5.70. The contents of moisture, crude protein, crude fat, crude ash and crude fiber of sunflower seed sprout were 94.7%, 1.3%, 0.3%, 1.3% and 1.6%, respectively. The vitamin A, vitamin B$_1$, vitamin B$_2$, vitamin C and niacin contents in sunflower seed sprout were 114.411. U%, 0.06mg%, 0.05mg%. 5.90mg% and 0.80mg%, respectively. The contents of Ca, P, Fe, Na, K, Mn, Cu, Zn and Mg in sunflower seed sprout per 100g were 80.00mg, 4.85mg, 3.63mg, 8.25mg, 180.90mg, 1.35mg, 0.43mg, 1.85mgand 66.35mg, respectively. The crude ash and crude fiber content of sunflower seed sprout were 3 or 4 times higher than those in the sprout of radish seed, mung bean, soybean or alfalfa, respectively.

• 한국축산식품학회지
• /
• 제37권6호
• /
• pp.948-954
• /
• 2017

The objective of this study was to investigate the relationship between muscle fiber characteristics and fatty acid composition of four major muscles in Korean native black goat (KNBG). Longissimus lumborum (LL), psoas major (PM), semimembranosus (SM), and gluteus medius (GM) were obtained from five male KNBGs of 36 mon of age and subjected to histochemical analysis and to determine fatty acid composition and meat quality traits. There were significant (p<0.05) differences in fiber number percentage (FNP) and fiber area percentage (FAP) of fiber types among these four muscles. PM had the highest FNP of type I and the lowest FNP of type IIB, while SM had the highest FNP of type IIB. The highest fat content was observed in LL while SM had the lowest fat content. The proportions of SFA and MUFA were significantly (p<0.05) different among four muscles due to differences in the majority of fatty acids such as oleic (C18:1) and palmitic (C16:0) acids. The PUFA/SFA ratio was significantly (p<0.05) different among four muscles, and the highest PUFA/SFA ratio was observed in PM. Results suggested that LL and PM might be healthful because of higher desirable fatty acid value and PUFA/SFA ratio, respectively. Also, data showed that correlations between muscle fiber types and fatty acids proportion of goat muscles were reversed with those of cattle muscles.

• 한국초지조사료학회지
• /
• 제8권2호
• /
• pp.128-134
• /
• 1988

This experiment was carried out to compare chemical composition of corn-cowpea inter cropping and corn monocropping plants at different harvestion time and obtained the following results. 1. In both cropping systems, the contents of crude fat and nitrogen free extract (NFE) were significantly increased (P<0.01), while that of crude protein crude fiber and crude ash were decreased (P<0.01) with each harvesting time. 2. The acid detergent fiber (ADF) and crude fiber contents were decreased same patterns in growing period, however, according to maturing of corn ears the difference between ADF and crude fiber contents reduced. 3. At mature stage, crude protein yields per 10a in corn monocropping and corn-cowpea intercropping system were 127.6kg and 152.1kg, respectively. The difference of crude protein content between corn-cowpea intercropping and corn monocropping system was 19.2%. 4. TDN yields of each cropping system, at mature stage, obtained similar results and TDN yields per 10a of corn monocropping and corn-cowpea intercropping system were 1006.1kg and 990.1, respectively. 5. Conseqently, corn-cowpea intercropping system could be increased protein yield without decreasing of dry matter yield in comparison with corn monocropping system.

• Carbon letters
• /
• 제12권4호
• /
• pp.223-228
• /
• 2011

In this present work, the effect of additional heat-treatment (AHT) in the range from $1800^{\circ}C$ to $2400^{\circ}C$ on the chemical composition, morphology, microstructure, tensile properties, electrical resistivity, and thermal stability of commercial polyacrylonitrile (PAN)-based carbon fibers was explored by means of elemental analysis, electron microscopy, X-ray diffraction analysis, single fiber tensile testing, two-probe electrical resistivity testing, and thermogravimetric analysis (TGA). The characterization results were in agreement with each other. The results clearly demonstrated that AHTs up to $2400^{\circ}C$ played a significant role in further contributing not only to the enhancement of carbon content, fiber morphology, and tensile modulus, but also to the reduction of fiber diameter, inter-graphene layer distance, and electrical resistivity of "as-received" carbon fibers without AHT. The present study suggests that key properties of commercial PAN-based carbon fibers of an intermediate grade can be further improved by proprietarily adding heat-treatment without applying tension in a batch process.