• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.3
• /
• pp.231-236
• /
• 2004

In order to identify the growth characteristics, the yield and chemical composition of Jeju native sorghum(Sorghum bicolor L.) based on seeding date in Jeju region. Seeding carried out the 10-day intervals from March 27 to May 27 in 2000, respectively. Plant height was 222.9 cm, Showing the highest on seeding date, April 7 among that of any other seeding date. On the other hand, those of early and late seeding gradually decreased. The results of stem diameter, number of leaves were similar to those of the plant height. The yield of fresh, dry matter forage, crude protein and TDN found the highest on April 7 seeding, 48.0 MT/ha, 12.0 MT/ha, 1.0 MT/ha, 5.3 MT/ha, respectively. In early and late seeding, the yield was gradually decreased. According to delaying the seeding date, March 27 to May 27, the contents of crude protein (from 7.8 to $11.4\%$) ether extract(from 1.7 to $3.3\%$), nitrogen free extract(from 34.1 to $40.0\%$) and TDN(from 42.9 to $52.5\%$) were gradually increased, respectively. On the other hand, those of crude fiber (from 40.6 to $32.3\%$) and crude ash (from 10.3 to $7.6\%$) were decreased. These results showed that April 7 was the optimum seeding date with the sole object of feed production of Jeju native sorghum.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.2
• /
• pp.145-154
• /
• 2004

The objective of this experiment was to suggest the optimum cutting height for turf type mixtures{Kentucky bluegrass(Newport) 40％ + tall fescue(Rebell Jr) 20％ + perennial ryegrass (Palmer Ⅱ) 10% + redtop(Barricuda) 10％ + red fescue(Salem) 10% + creeping bentgrass(Crenshaw) IO%}. The fields trials were conducted from 1998 to 2001 at Chungnam National University in order to evaluate the dry matter yield and quality on the cutting heights(3, 4, and 5cm). With increasing the cutting height, the average DM yields of turf type mixtures over 3-year significantly increased, therefore the average total DM yields were obtained 11,158, 12,143 and 13,181㎏/ha at cutting height 3, 4 and 5cm(p<0.05), respectively. The CP content and OMO decreased(p<0.05), whereas the fiber contents slightly increased with increasing the cutting height. The average CPDM and DDM yields were obtained 2,012 and 8,621㎏, 2,097 and 9,461㎏, and 2,298 and 9,951㎏ at cutting height 3, 4, and 5㎝(p<0.05), respectively. The botanical compositions of Kentucky bluegrass and tall fescue were maintained high as 30 ∼ 36％, but that of perennial ryegrass was maintained low as 10-15%. Most of other species were low, but redtop and creeping bentgrass among the other species made up 8∼10％ and 7 ∼ 8% of botanical composition at the last 6th cutting time in 2001, respectively. In general, the level of cutting height of turf type mixtures was not more closely associated with botanical composition. The results of this experiment indicated that a 5㎝ of cutting height of turf type mixtures sown by extensive method would seemed adequate.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.10
• /
• pp.1307-1313
• /
• 2007

In order to evaluate the utilization of immature green wheat kernels as food processing material, these experiments were carried out to analyze general composition, free sugars, free amino acids, mineral content and color of 3 wheat varieties according to their heading dates. Contents such as moisture, crude protein, crude lipid and ash were gradually decreased according to the days after heading of 3 wheat varieties, while crude fiber and starch were gradually increased. Maltose and maltotriose contents in immature green wheat kernels were high but its rapidity decreased by closing to ripeness. Contents of free amino acids showed a tendency to decrease, among which alanine content was the highest around 25 days after heading, and then glutamic acid, GABA, glycine in order. Contents of total free amino acid were decreased by closing to ripeness. Among 3 wheat varieties, its contents of Guru wheat was the highest. As wheat matured, ${\beta}-glucan$ contents were decreased from 1.5% to 0.28% on 43 days after heading. Mineral contents of 3 wheat varieties were generally increased by closing to ripeness after coming into ears, and K, Mg were especially prominent. As wheat matured, lightness was decreased, while redness and yellowness were increased. Considering chemical composition and color, the immature green wheat were produced through blanching the spikes harvested before the yellow ripe stage. The harvested green wheat cereals is able to eat raw wheat or cook it as food processing material.

• Journal of the East Asian Society of Dietary Life
• /
• v.12 no.2
• /
• pp.107-122
• /
• 2002

The purpose of this study was to develop menus for daily intake of 25g soybean protein and to analyse nutrients of these foods. Analytical values were compared to the theoretical one using the flood composition table and recommended dietary allowances for Koreans (7th revision). The results are as follows. 1. Soybean curd residue stew, Soybean curd, Kimchi saute, and hard boiled soybean and lotus root were selected for the menu for January, of which the content of soy bean protein(SBP) was 33.1g, soybean stew, soybean curd and soybean sprout saute, and Italian deep fried soybean curd were fur February, of which the content of SBP was 35.0g. The content of SBP in soybean paste soup with soybean curd, fried soybean curd and fried soybean curd roll, the menu for March, was 24.9g. That of April were soybean curd gratin with soymilk, soybean curd and ham with garlic dressing and the content of SBP was 26.3g. That of May were soybean porridge, soybean flour cake with honey (Dasik), soybean sprout soup and the content of SBP was 26.7g. That of June were soymilk, pan-fried soybean curd, steamed soybean curd with chicken and the content of SBP was 28.4g. That of July were noodle with soymilk, mapatofu, soybean curd salad and the content of SBP was 24.7g. That of August were soybean sprout with mustard dressing, Tossed green pepper with raw soybean flour, Tofu and Kimchi stew, soybean curd steak and the content of SBP was 26.2g. That of September were Chinese cabbage soup with raw soybean flour, sweet and sour tofu and the content of SBP was 23.2g. That of Oct. were Fermented soybean stew, soybean pan cake and the content of SBP was 24.3g. That of November were not-pressed soybean curd casserole, pan-fried mashed soybean curd with egg, stir frying deep-fried soybean curd with vegetables and the content of SBP was 22.4g. That of December were soybean curd and mushroom casserole, fried soybean curd and vegetables, hard boiled soybean curd and the content of SBP was 28.9g. 2. The ratio of the analytical value over theoretical value (A/B%) of one serving in kcal, carbohydrate, protein, fat ash and dietary fiber were 57.7~107.7% 42.9~131.9%, 79.2~118.3%, 54.5~ 100%, 40.7~80.8% and 42.1~113.2%, respectively.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.185-193
• /
• 2015

Ultra high performance concrete (UHPC) has been developed to overcome the low tensile strengths and brittleness of conventional concrete. Considering that UHPC, owing to its composition and the use of steel fibers, develops a compressive strength of 180 MPa as well as high stiffness, the top flange of the steel girder may be superfluous in the composite beam combining a slab made of UHPC and the steel girder. In such composite beam, the steel girder takes the form of an inverted-T shaped structure without top flange in which the studs needed for the composition of the steel girder with the UHPC slab are disposed in the web of the steel girder. This study investigates experimentally and analytically the flexural behavior of this new type of composite beam to propose details like stud spacing and slab thickness for further design recommendations. To that goal, eight composite beams with varying stud spacing and slab thickness were fabricated and tested. The test results indicated that stud spacing running from 100 mm to 2 to 3 times the slab thickness can be recommended. In view of the relative characteristic slip limit of Eurocode-4, the results showed that the composite beam developed ductile behavior. Moreover, except for the members with thin slab and large stud spacing, most of the specimens exhibited results different to those predicted by AASHTO LRFD and Eurocode-4 because of the high performance developed by UHPC.

• Journal of the Korea Concrete Institute
• /
• v.26 no.6
• /
• pp.761-769
• /
• 2014

Ultra high performance concrete (UHPC) has been developed to overcome the low strengths and brittleness of conventional concrete. Considering that UHPC, owing to its composition and the use of steel fibers, develops a compressive strength of 180 MPa as well as high stiffness, the top flange of the steel girder may be superfluous in the composite beam combining a slab made of UHPC and the steel girder. In such composite beam, the steel girder takes the form of an inverted-T shaped structure without top flange in which the studs needed for the composition of the steel girder with the UHPC slab are disposed in the web of the steel girder. This study investigates experimentally and analytically the flexural behavior of this new type of composite beam to propose details like stud spacing and slab thickness for further design recommendations. To that goal, eight composite beams with varying stud spacing and slab thickness were fabricated and tested. The test results indicated that stud spacing running from 100 mm to 2 to 3 times the slab thickness can be recommended. In view of the relative characteristic slip limit of Eurocode-4, the results showed that the composite beam developed ductile behavior. Moreover, except for the members with thin slab and large stud spacing, most of the specimens exhibited results different to those predicted by AASHTO LRFD and Eurocode-4 because of the high performance developed by UHPC.

• Journal of Nutrition and Health
• /
• v.50 no.5
• /
• pp.504-518
• /
• 2017

Purpose: The objective of this study was to develop a processed foods database (DB) for estimation of processed food intake in the Korean population using data from the Korea National Health and Nutrition Survey (KNHANES). Methods: Analytical values of processed foods were collected from food composition tables of national institutions (Development Institute, Rural Development Administration), the US Department of Agriculture, and previously reported scientific journals. Missing or unavailable values were substituted, calculated, or imputed. The nutrient data covered 14 nutrients, including energy, protein, carbohydrates, fat, calcium, phosphorus, iron, sodium, potassium, vitamin A, thiamin, riboflavin, niacin, and vitamin C. The processed food DB covered a total of 4,858 food items used in the KNHANES. Each analytical value per food item was selected systematically based on the priority criteria of data sources. Results: Level 0 DB was developed based on a list of 8,785 registered processed foods with recipes of ready-to-eat processed foods, one food composition table published by the national institution, and nutrition facts obtained directly from manufacturers or indirectly via web search. Level 1 DB included information of 14 nutrients, and missing or unavailable values were substituted, calculated, or imputed at level 2. Level 3 DB evaluated the newly constructed nutrient DB for processed foods using the 2013 KNHANES. Mean intakes of total food and processed food were 1,551.4 g (males 1,761.8 g, females 1,340.8 g) and 129.4 g (males 169.9 g, females 88.8 g), respectively. Processed foods contributed to nutrient intakes from 5.0% (fiber) to 12.3% (protein) in the Korean population. Conclusion: The newly developed nutrient DB for processed foods contributes to accurate estimation of nutrient intakes in the Korean population. Consistent and regular update and quality control of the DB is needed to obtain accurate estimation of usual intakes using data from the KNHANES.

• Food Science of Animal Resources
• /
• v.28 no.4
• /
• pp.505-511
• /
• 2008

The goal of this study was to investigate the effects of dietary mugwort on the proximate composition, volatile basic nitrogen (VBN), thiobarbituric acid reactive substance (TBARS) and fatty acid in chicken meats. One hundred sixty broiler chicks (1 d old) were assigned to one or four dietary groups: Control; commercial feed supplemented with 1% mugwort (T1); commercial feed with 3% mugwort (T2) and commercial feed with 5% mugwort (T3). After 42 d, broilers from each group were slaughtered and meat samples were vacuum packaged and stored at $4{\pm}1^{\circ}C$ over a period of 0, 1,2,3, and 4 wk. Chicken breast was not influenced by all treatments in moisture, crude protein and crude fiber, while crude fat was lowered (p<0.05) in chickens fed with the T2 and T3 diets compared to the control and T1 diets. All treatments with mugwort diets tended to have decreased VBN values for chicken breast and thigh compared to control. As storage time increased, VBN was increased for all chickens (p<0.05). No significant differences in TBARS were observed among all treatments at 0 wk. TBARS values were reduced with the T2 and T3 diets and initially increased from 0 through 3 wk, then abruptly decreased at 4 wk. Dietary mugwort supplementation resulted in increased stearic acid (excepted T2) and oleic acid and decreased linoleic acid. Stearic acid in thigh meat was decreased in the T1, T2 and T3, however linoleic acid levels tended to increase with mugwort powder supplementation. It is concluded that dietary mugwort has a positive effect on increasing unsaturated fatty acid contents and decreasing saturated fatty acids.

• Journal of agriculture & life science
• /
• v.46 no.4
• /
• pp.155-164
• /
• 2012

The chemical components in different parts of Artemisia argyi was investigated to provide industrial possibilities as functional foods The analysis result of proximate composition in leaves, stems and roots of Artenisia argyi was substantially as follows. The crude protein contents were 19.87, 6.14 and 5.68%, the crude lipid contents were 4.56, 1.30 and 1.20%, the crude fiber contents were 16.80, 29.70 and 29.45%, respectively. The major mineral components in Artemisia argyi were potassium, calcium and magnesium. Contents of potassium and calcium in leaves were 4,270.24 and 617.64 mg/100 g, respectively, they were more than double the contents of root. Sucrose and glucose as main free sugars were detected in the leaves and roots. However, glucose and fructose were identified in the stem. Total amino acids showed 17 amino acids. Contents of total amino acid in the leaves was the highest as 4,864.11mg/100g, and the stems and roots showed 1,953.99 and 1,601.73mg/100g, respectively. The major amino acids in the leaves and stems were proline(963.91 and 407.52mg/100g) and aspartic acid(577.38 and 299.17mg/100g), respectively. Glutamic acid(206.34mg/100g) and arginine(193.23mg/100g) were main amino acids in the roots. The major fatty acids in all parts were linoleic acid($C_{18:2}$), behenic acid($C_{22:0}$), and palmitic acid($C_{16:0}$). Eupatilin(35.0mg/100g) and jaceosidin (107.63mg/100g) as physiological compounds contents were higher in leaves than other parts.

• Journal of Apiculture
• /
• v.32 no.3
• /
• pp.139-146
• /
• 2017

Floral scent emitted from many plants is the critical factors for pollinator attraction and defense for adaptation in environments. The fragrance components of flowers are different in composition by geographical origins, climate factors and the development stages of flowers. In the present study, we investigated the volatile-floral compounds in flowers of Robinia pseudoacacia L. and defined the chemical contribution for flowering periods. The volatile compounds analysis was performed by gas chromatography with mass selective detector after solid phase microextraction (SPME). We reported different compositional features of fragrance compounds according to flowering periods. The abundant compounds identified in stage 1 were ${\alpha}$-pinene (66.80%) and ${\beta}$-pinene (26.53%). Those of the stage 2 were (Z)-${\beta}$-ocimene (37.57%), ${\alpha}$-pinene (15.16%), benzaldehyde (16.63%), linalool (12.13%). The volatiles of stage 3 comprised an abundance of (Z)-${\beta}$-ocimene (64.94%), ${\alpha}$-pinene (9.84%), linalool (8.92%), benzaldehyde (1.71%). Leaf volatiles were distinct from those in the reproductive plant parts by their high relative amount of (E)-${\beta}$-ocimene (23.50%) and (Z)-3-Hexenyl acetate (27.87%). Differences in flower scents of the different stages and leaves are discussed in light of biochemical constraints on volatile chemical synthesis and of the role of flower scent in evolutionary ecology of R. pseudoacacia.