• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.2
• /
• pp.165-182
• /
• 2006

In this study, field test was performed to investigate the strength-improvement effect of shotcrete mixed Micro-silica fume and shotcrete quality was estimated by EFNARC standard. Deterioration test combined the Freezing-thawing and Carbonation was also performed in order to investigate a long-term durability of high-strength shotcrete. As a result of test, the compressive strength of shotcrete using Micro-silica fume was 45.2~55.8MPa and flexible strength was 5.01~6.66MPa, so a promotion ratio of strength was 37~79%, 17~61% respectively. And the strength-improvement effect of strength by silica fume addition ratio of 7.5~10% for cement mass was more superior to the others. Due to relative dynamic modulus, mass decrease rate and carbonation progress of shotcrete mixed Micro-silica fume, it was especially realized that Micro-silica fume reduced deterioration caused by steel fiber and improved a long-term durability of shotcrete.

• Journal of Nutrition and Health
• /
• v.42 no.5
• /
• pp.453-463
• /
• 2009

This study was to evaluate the effectiveness of the weight control program for female college students. The program was composed of diet and behavioral modifications for 8 weeks. A total of 78 participants enrolled the weight control program. Upon completion of the program, 53 participants experienced weight loss and 25 did not. The intakes of carbohydrate and fat were significantly decreased in both groups. However, the total diet quality index-international (DQII) scores as well as individual scores such as variety scores for protein source and adequacy scores for vegetable, fiber, calcium and vitamin C and moderation scores for empty calorie food were increased significantly in weight loss group only. In the weight loss group, weight, BMI, body fat, percent body fat and waist-hip ratio were decreased significantly. In addition, compared to the weight gain group, the weight loss group had higher changes in weight (weight loss group: -2.6% vs weight gain group: 1.5%, p < 0.001), body fat (-6.0% vs 0.0%, p < 0.001), percent body fat (-3.1% vs -0.3%, p < 0.001), waist-hip ratio (-1.0% vs 0.5%, p < 0.001) and BMI (-2.6% vs 1.3%, p < 0.01). There was no difference in blood profiles between the two groups. The changes in DQI-I scores were significantly correlated with the changes in body weight (r = -0.239, p < 0.05) and BMI (r = -0.224, p < 0.05), indicating that effective nutrition education could help improve diet quality leading to successful weight management among female college students.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.11
• /
• pp.1318-1329
• /
• 2003

The purpose of this study was to examine the effects of the structural characteristics of men's suit fabrics on the texture image and the preference, and to analyze the relationship between the preference and the practical sales ratio. In addition, the texture images and the preference of fabric and jackets made of the same fabrics were compared. As specimen, jackets for men's suit of 2002' S/S and their fabrics were collected. Questionnaires composed of 22 sensibility related and 21 fabric image related adjectives were developed. For the subjective evaluation of the texture image, both jackets and fabric samples were tested. Tests were performed with 100 female subjects in clothing department and apparel industry. For the objective evaluation, structural characteristics such as fiber contents, yarn twist, fabric count, thickness and weight were analyzed. Total Hand Value were calculated from mechanical properties determined by the KES-FB system. Factor analysis showed sensibilities were classified into 6 categories; "surface roughness", "weight", "density", "stiffness", "elasticity" and "wetness". Fabric images were classified into 4 categories; "classic", "original", "practical", and "stuffy". Depending on the method to show the specimen to the subjects, whether it is suit or fabric, statistically significant differences were observed with a number of adjectives for sensibilities and fabric images. The results of THV of KES did not agree with the preference of subjects, which suggests that we should be careful when using the KES system, which was developed for Japanese people. Price was considered to be another factor besides the texture image that influenced on purchase.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.3
• /
• pp.383-390
• /
• 2011

In this study, a process combined biofiltration with sulfur-utilizing autotrophic denitrification and membrane separation was proposed to examine the efficiency of nitrogen removal. As an experimental device, hollow-fiber module was installed in the center of reactor to generate the flux forward sulfur layer in the cylinder packed with granular sulfur. In addition, a simple module was installed in activated sludge aeration tank which inside and outside of sulfur-using denitrification module was covered with microfilter and the module was considered as an alternative of clarifier. The experiment for developing new MBR process was carried out for three years totally. As the results of first two-year experiment, successful nitrogen removal performance was revealed with lab-scale test and pliot scale plant using artificial wastewater and actual plating wastewater. In this year, pilot scale test using actual domestic wastewater was performed to prove field applicability. As the results, high-rate nitrogen removal performance was confirmed with about 0.19 kg ${NO_3}^--N/m^3$ day of rate. Also significant fouling and pressure increase were not found during the experiment. And, the production ratio of sulfate and the consumption ratio of alkalinity showed a slightly higher value about 311 mg ${SO_4}^{2-}/L$ and 369 mg $CaCO_3$/L, respectively. In conclusion, the developed MBR process can be utilized as an alternative for retrofiting existing wastewater plants as well as new construction of advanced sewage wastewater treatment plants, with cost-effective merit.

• Fisheries and Aquatic Sciences
• /
• v.17 no.1
• /
• pp.47-57
• /
• 2014

Thai Jasmine rice (Oryza sativa, long grain Indica var.) is popular in southeastern Asia and China due to its non-glutinous, fluffy texture and fragrant smell. However it has a high starch digestibility, which leads to an increased glycemic index (GI). Therefore it may require modified cooking methods for diabetes patients. The objectives of this study were to optimize the ratio of Thai Jasmine rice, sea tangle, and olive oil (CLTR) based on consumers' acceptance. The GI of plain cooked Thai Jasmine rice (CLR) was measured as a control. Sensory evaluation and response surface methodology were used to determine the optimal ratio. Texture analysis and nutritional evaluation were also performed on the optimal recipe of cooked Jasmine rice with sea tangle. A multiple regression equation was developed in quadratic canonical polynomial models. We used 26 trained Chinese panelists in their forties to rate color, flavor, adhesiveness, and glossiness, which we determined were highly correlated with overall acceptability. The optimal CLTR formula was 34.8% rice, 2.8% sea tangle, 61.9% water, and 0.5% olive oil. Compared to CLR, CLTR had a lower hardness, but a higher springiness and cohesiveness. However, CLR and CLTR had the same adhesiveness and chewiness. The addition of sea tangle and olive oil delayed retro-gradation of starch in CLTR and increased total dietary fiber, and protein and ash contents. The degree of gelatinization, and in vitro protein and starch digestibility of CLTR were lower than those of CLR. Based on Wolver' method, the GI of CLTR (52.9, incremental area under the glycemic-response curve, ignoring the area below fasting, as used for calculating the GI [Inc]) was lower compared with that of CLR (70.94, Inc), which indicates that CLTR is effective in decreasing and stabilizing blood glucose level, owing to its lower degree of gelatinization and starch digestibility. Our results show that CLTR can contribute to the development of a healthier meal for families and the fast food industry.

• The Korean Journal of Food And Nutrition
• /
• v.34 no.4
• /
• pp.372-380
• /
• 2021

In this study, data from the 7th (2016~2018) and 8th (2019) Korea National Health and Nutrition Examination Surveys were used, which included 5,325 subjects. Health behavior, dietary and nutrient intake status, physical measurement and biochemical characteristics, and risk factors for elderly related chronic diseases were classified and analyzed according to the changing composition of single households and other households in the current society. As a result, the ratio of current smokers and drinkers in young adult single households, walking less than 30 minutes per day, subjective health status was poor, breakfast rate less than three times per week, eating out frequency more than once a day, lipid intake ratio to total calories, saturation fatty acid intake were significantly higher. In addition, waist circumference, and diastolic blood pressure were significantly higher. However, dietary fiber intake level was significantly lower. The results for hypertension, which is the representative chronic disease that causes old age-related chronic diseases, were significantly higher in single households (ORs=1.400 (95% CI: 1.095, 1.791), p=0.007). Although young adults may not have showed particularly serious health problems yet, education is believed as important to recognize and prevent age-related disease risk factors.

• Journal of the Korea Concrete Institute
• /
• v.26 no.1
• /
• pp.63-70
• /
• 2014

This experimental study was intended to improve the compressive strength of multi-walled CNT reinforced cementitious composites with efficiency. The variables considered are the degree of sonication, the amount of surfactant, the replacement ratio of silica fume, etc. Optical microscope informed that fiber dispersion of CNT was improved with the increase of sonication time, and the compressive strength was proved to be enhanced as the degree of sonication increased. When superplasticizer as a surfactant had SP/CNT ratio of 4~6, the best improvement in strength was obtained. Silica fume was shown to produce the highest compressive strength at 10% replacement. Microstructure of CNT composites was also analyzed; XRD and SEM results indicated that CNT addition hardly changed hydration products and microstructure, and MIP analysis found the reduction of total porosity as well as the increase of nano-pores with the size of tens of nm instead of the decrease of pore distribution in the region of around 10 ${\mu}m$ and 100 nm. The results of microstructure analysis explains that the strength improvement is closely related to physical contribution rather than chemical influence by adding CNT.

• Korean Journal of Organic Agriculture
• /
• v.28 no.4
• /
• pp.615-626
• /
• 2020

The objective of present experiment was to examine the impact of different organic nitrogen (N) fertilizer application rates and different harvesting periods on the forage yield and feed value of kenaf (Hibiscus cannabinus L.). This study was carried out from May to September 2019, the amount of 80 kg of kenaf seed/ha were applied with different rates of nitrogen fertilizer. The plants were sampled at 10 days intervals (100, 110, 120, and 130 days after seeding) from different harvesting dates. In the organic fertilizer treatments, the highest dry matter (DM) yield was observed in the application rate at 250 kg of N/ha. Crude protein (CP) content in leaves was similar between the organic fertilizer rates at 200 and 250 kg of N/ha and were higher compared with other fertilizer treatments. The highest CP content in the stem was 4.3% in the organic fertilizer application rates st 250 kg of N/ha. Neutral detergent fiber (NDF) in leaves showed no significant difference between the chemical fertilizer rates at 200 and 250 kg of N/ha, and the organic fertilizer rates at 150 and 250 kg of N/ha. In addition, DM yield of kenaf was highest in the harvest of 100 days after seeding, and tended to decreased significantly with increase of harvesting periods (p<0.05). As the growth progressed, the plant height and stem ratio increased but the leaves ratio decreased significantly (p<0.05) and the highest was found at 110 days after seeding. The highest CP, Acid detergent fiber (ADF), NDF and total digestible nutrient (TDN) contents in leaves were 13.9, 25.4, 40.5 and 71.1%, respectively that were affected by different harvesting periods. Also, the ADF and NDF in stem increased significantly with increase of kenaf maturity (p<0.05). In conclusion, the optimal organic fertilizer application rates and the proper harvesting periods for the forage yield and quality of kenaf were at 200 to 250 kg of N/ha, and 100 to 110 days after seeding, respectively.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.5
• /
• pp.842-849
• /
• 2015

The purpose of this study was to determine the optimal mixing ratio of hot-air dried loquat leaf powder and optimum conditions for making Jeolpyun containing hot-air dried loquat leaf powder (LLP). Samples of Jeolpyun were prepared with different contents of hot-air dried LLP (0%, 3%, 6%, 9%, 12%) followed by analysis of chemical properties, moisture contents, color, mechanical quality characteristics, amylograph, and sensory tests. Chemical analysis showed that hot-air dried LLP consisted of 11.41% water, 8.34% crude protein, 1.90% crude fat, 7.74% crude ash, and 16.95% crude fiber, with $^{\circ}Brix$ of 2.07, and pH of 5.78. Moisture contents of samples ranged from 52.22 to 50.06%. L-value decreased with addition of hot-air dried LLP, whereas a-value increased with increasing amount of hot-air dried LLP, and no significant differences were observed regarding b-value. In the mechanical evaluation of physical properties, hardness deceased with increasing amount of hot-air dried LLP. The starting temperature amylograph of Jeolpyun was higher in samples with hot-air dried LLP than those without hot-air dried LLP. Set back was slower with increasing amount of hot-air dried LLP, an increasing amount of hot-air dried LLP made set back of Jeolpyun slower. In the sensory test, Jeolpyun with 6% hot-air dried LLP was the most preferred with less bitterness and proper softness, moisture and chewiness. Therefore, addition of 6% hot-air dried LLP to Jeolpyun made with rice flour showed the best overall preference. Based on the results of this experiment, samples with hot-air dried LLP showed slower hardening than those without hot-air dried LLP in textural changes during storage, and Jeolpyun with 6% hot-air dried LLP is expected to increase quality and preference of Jeolpyun.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.1
• /
• pp.66-73
• /
• 2022

The purpose of this study was to develop self-heating concrete by utilizing the conduction resistance of concrete in order to reduce the risk of occurrence of black ice in the concrete pavement in winter and to prevent damage caused by freez-thawing effect. For this purpose, it was attempted to evaluate the strength and temperature exothermic characteristics using powder and liquid waste CNTs and a waste cathode agent as a conduction promotion. It was analyzed that liquid waste CNT had an effective dispersion degree in the mortar and a small decrease in strength occurred. In addition, DC 24 V was supplied by applying steel mesh, copper foil and copper wire to the mortar as electrodes, and the temperature change characteristics according to the mixing ratio of spent CNTs, anodes and carbon fibers were evaluated. In addition, by evaluating the temperature characteristics according to the electrode spacing from the selected optimal mixture, it was confirmed that it had sufficient heating characteristics up to an electrode spacing of 100 mm up to AC 50 V.