• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.466-473
• /
• 2017

Recently, domestic railway related institutes are developing pantographs for high speed trains; to lighten the upper arm, this device has a composite structure of CFRP (Carbon Fiber Reinforced Plastic) and aluminum instead of conventional steel. In the case of KTX-Sancheon, the pantograph must have a large current capacity because this system is of power-car type, supplying all necessary power for the train through a single pantograph. If the thickness of the pipe is arbitrarily increased in order to increase the current carrying capacity, without analyzing the thermal characteristics of the aluminum pipe, the increase in the weight of the upper arm may cause degradation of the current collecting performance. Therefore, in this paper, using the thermal analysis technique, we analyze the temperature change characteristics of the aluminum pipe of the upper arm over time, while receiving power at the stationary state of the KTX-Sancheon; we also examine the adequacy of the minimum thickness of the aluminum pipe in accordance with the proposed pantograph flow capacity.

• Journal of Korean Medicine Rehabilitation
• /
• v.27 no.2
• /
• pp.1-8
• /
• 2017

Objectives Ethanol is a potent inhibitor of muscle protein synthesis. Muscle mass is regulated by the balance between rates of protein synthesis and protein breakdown. Both acute and chronic alcohol consumption inhibits synthesis to a greater extent than degradation. Protein synthesis is more intensely decreased in type II fibers than in type I fibers. Apoptosis has been shown to occur frequently in a variety of tissues in response to chronic alcohol feeding. Increased muscle fiber apoptosis has been shown in alcoholics with myopathy. Pueraria radix has been used for many disorders such as fevers, gastrointestinal disorders, muscle aches, allergies, respiratory problems, skin problems, high blood pressure, migraine headaches, lowering cholesterol and treating chronic alcoholism. We therefore tested the hypothesis that oral treatment with Pueraria radix could reduce the ethanol-induced muscle atrophy. Methods Young male Sprague-Dawley rats were orally given 25% ethanol (5 ml/kg, body weight) daily with Ethanol for 4 weeks. Normal group was similarly administrated with saline. The Rats of Pueraria radix treated group (EtOH+PR) were orally administrated Pueraria radix water extract, and rats of EtOH group were given with the vehicle only. After 4 week, the morphology of gastrocnemius and plantaris muscles were assessed by hematoxylin and eosin staining. The immunoreactivities of pre-apoptotic BAX and anti-apoptotic Bcl-2 proteins were also measured. Results The muscles from rats of EtOH group represented a significant reduction in average cross section area compared to Normal group. EtOH+PR group had increased fiber compared to the EtOH group. Moreover, to investigate the ethanol-induced muscular apoptosis, the immunohistochemical analysis of Bax and Bcl-2 was carried out. The treatment with Pueraria radix (EtOH+PR) significantly decreased BAX expression and increased Bcl-2 expression 4 weeks after ethanol administration when compared with Normal group. Conclusions These results suggest that Pueraria radix water extract has protective effects on chronic alcohol induced myopathy.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.3
• /
• pp.168-174
• /
• 2020

Recently, the size of Liquified Natural Gas (LNG) carriers has been increasing, in turn increasing the load generated during operation. To handle this load, the thickness of LNG Cargo Containment Systems (CCSs) should be increased. Despite increasing the thickness of LNG CCSs, a secondary barrier is still used in conventional thickness. Therefore, the mechanical performance of the existing secondary barrier should be verified. In this study, tensile test of the secondary barrier was performed to evaluate mechanical properties under several low- and cryogenic-temperature conditions considering LNG environment, and in each fiber direction considering that the secondary barrier is composed of anisotropic composite materials depending on the glass fibers. Additionally, the coefficient of thermal expansion was measured by considering the degradation of the mechanical properties of the secondary barrier caused by the generated thermal stress during periodical unloading. As a result, the mechanical performance of secondary barrier in the Machine Direction (MD) was generally found to be superior than that in the Transverse Direction (TD) owing to the warp interlock structure of the glass fibers.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.1
• /
• pp.182-189
• /
• 2010

The strengthening performance of FRPs(Fiber Reinforced Polymers) is directly affected by the environmental conditions such as freezing-thawing and moisture because FRPs are usually bonded on the concrete surface. It is, therefore, strongly required to evaluate a durability of bond between FRPs and concrete as well as FRP materials itself. The freezing-thawing resistance of FRPs is evaluated in this study with the variables of freezing-thawing conditions, types of FRP and freezing-thawing cycles. From the test results, it is found that tensile strength and pull-off strength of CFRP are not affected by the freezing-thawing. On the other hands, those of GFRP show a little degradation because of continuous water immersion during thawing process. But, cautions are needed on the bond durability between FRPs and concrete in case of continuous water supplying from adjacent to the concrete.

• Composites Research
• /
• v.32 no.5
• /
• pp.258-264
• /
• 2019

In this paper, a progressive failure analysis method was developed using the Hashin failure criterion and crack band model. Using the failure criterion, the failure initiation was evaluated. If the failure initiation is occurred, the damage variables at each failure modes (fiber tension & compression, matrix tension & compression) was calculated according to linear softening degradation behavior and the variables are used to derive the damaged stiffness matrix. The damaged stiffness matrix is reflected to damaged material and the progressive failure analysis is continued until the damage variables to be 1 that complete failure of material. A series of processes were performed using FE commercial code ABAQUS with user defined material subroutine (UMAT). To evaluate the proposed progressive failure model, the experimental results of open hole composite laminate tests was compared with numerical result. Using digital image correlation system, the strain behavior also was compared. The proposed numerical results were coincided well with the experimental results.

• Animal Bioscience
• /
• v.36 no.7
• /
• pp.1044-1058
• /
• 2023

Objective: The objective of this study was to characterize physiochemical and nutrient profiles of feedstock and co-products from canola bio-oil processing that were impacted by source origin. The feedstocks and co-products (mash, pellet) were randomly collected from five different bio-oil processing plants with five different batches of samples in each bio-processing plant in Canada (CA) and China (CH). Methods: The detailed chemical composition, energy profile, total digestible nutrient (TDN), protein and carbohydrate subfractions, and their degradation and digestion (CNCPS6.5) were determined. Results: The results showed that TDN_1x was similar in meals between CA and CH. CH meals and feedstock had higher, truly digestible crude protein (tdCP) and neutral detergent fiber (tdNDF) than CA while CA had higher truly digestible non-fiber carbohydrate (tdNFC). The metabolizable energy (ME_3x), net energy (NE_Lp3x, NE_m3x, and NE_g3x) were similar in meals between CA and CH. No differences were observed in energy profile of seeds between CA and CH. The protein and carbohydrate subfractions of seeds within CH were similar. The results also showed that pelleting of meals affected protein sub-fractionation of CA meals, except rapidly degradable fractions (PB1), rumen degradable (RDPB1) and undegrdable PB1 (RUPB1), and intestinal digestible PB1 (DIGPB1). Canola meals were different in the soluble (PA2) and slowly degradable fractions (PB2) between CA and CH. The carbohydrate fractions of intermediately degradable fraction (CB2), slowly degradable fraction (CB3), and undegradable fraction (CC) were different among CH meals. CH presented higher soluble carbohydrate (CA4) and lower CB2, and CC than CA meals. Conclusion: The results indicated that although the seeds were similar within and between CA and CH, either oil-extraction process or meal pelleting seemed to have generated significantly different aspects in physiochemical and nutrient profiles in the meals. Nutritionists and producers need to regularly check nutritional value of meal mash and pellets for precision feeding.

• Composites Research
• /
• v.21 no.6
• /
• pp.1-7
• /
• 2008

The main objective of this study is to investigate the effect of salt water on the mechanical properties of a high modulus carbon-epoxy composite. Specimens were made of a carbon-epoxy composite UPN139B of SK Chemical and tested under inplane tension and shear after 0, 1, 3, 6, 9, and 12 months immersion in 3.5% salt water. Acceleration technique such as temperature elevation was not used. The tensile strengths and modulli in fiber and matrix direction did not show any remarkable degradation until 12 months immersion. In contrast to the tensile properties, shear strength and modulus started to gradually decrease up to about 10% of values of dry specimens after 12 months immersion. It was confirmed through the test that the material UPN139B can be an effective material for the shell structures in salt water to resist against the external pressure buckling because of the high fiber directional modulus and corrosion resistance.

• Composites Research
• /
• v.21 no.2
• /
• pp.1-7
• /
• 2008

Composite materials are currently used in aero-space industry, sport and leisure industry but it has many problems such as mechanical properties deterioration by moisture absorption. In this study, we appraised interlaminar shear strength with specimen that immersed/ immersed-dried in water environment(distilled/sea) during $100{\sim}200$days. In the result, properties degradation of resin part and silan part by moisture absorption is judged early on main cause of interlaminar shear strength, and later destruction of mechanical bonding between silan part and fiber by moisture absorption is Judged later main cause of interlaminar shear strength. In conclusion, the recovery of interlaminar shear strength is judged to difficult due to interfacial destruction by moisture when pass over irreversible by moisture in composite material.

• Advances in concrete construction
• /
• v.16 no.4
• /
• pp.205-216
• /
• 2023

Concrete structures may become vulnerable during their lifetime due to several reasons such as degradation of their material properties; design or construction errors; and environmental damage due to earthquake. These structures should be repaired or strengthened to ensure proper performance for the current service load demands. Several methods have been investigated and applied for the strengthening of reinforced concrete (RC) structures using various materials. Fiber reinforced polymer (FRP) reinforcement is one of the most recent type of material for the strengthening purpose of RC structures. The main objective of the present research is to identify the behavior of reinforced concrete slabs strengthened with FRP bars by using near surface mounted (NSM) technique. Validation study is conducted based on the experimental test available in the literature to investigate the accuracy of finite element models using LS-DYNA to present the behavior of the models. A parametric analysis is conducted on the effect of FRP bar diameters, number of grooves, groove intervals as well as width and height of the grooves on the flexural behavior of strengthened reinforced slabs. Performance of strengthening RC slabs with NSM FRP bars was confirmed by comparing the results of strengthening reinforced slabs with control slab. The numerical results of mid-span deflection and stress time histories were reported. According to the numerical analysis results, the model with three grooves, FRP bar diameter of 10 mm and grooves distances of 100 mm is the most ideal and desirable model in this research. The results demonstrated that strengthening of reinforced concrete slabs using FRP by NSM method will have a significant effect on the performance of the slabs.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.712-720
• /
• 2012

Thermal degradation for glass fiber-reinforced polyamide 66 composite (PA 66) with respect of thermal exposure time has been investigated using optical microscopy, scanning electron microscopy and Fourier transform infrared spectroscopy. As the thermal exposure time was prolonged, a slight increase in tensile strength for only initial stage and afterward, a proportional decrease of tensile strength was observed. These results can be explained by the increase of crystallinity, followed by the increase of crosslinking density, chain scission and the decrease in chain mobility, due to thermal oxidation with the exposure time. Fourier transform infrared spectroscopy results showed the increase of ketone peak and silica peak on the surface of thermally exposed PA 66. In addition, the thermal decomposition kinetics of PA 66 was analyzed using thermogravimetric analysis at three different heating rates. The relationship between activation energy and lifetime-prediction of PA 66 was investigated by several methodologies, such as statistical tool, UL 746B, Ozawa and Kissinger. The activation energy determined by thermogravimetric analysis had a relatively large value compared with that from the accelerated test. This may result in over-estimating the lifetime of PA 66. In this study, a master curve of exponential fitting has been developed to extrapolate the activation energy at various service temperatures.