• Journal of Surface Science and Engineering
• /
• v.15 no.4
• /
• pp.218-225
• /
• 1982

The effects of ferrous ion on the properties of bright nickel electrodeposit were exa-mined. Iron exists as ferrous ion (Fe+2) and ferric ion (Fe+3) in the bath, a portion of the former tend to be oxidized to the somewhat harmful ferric ion. Iron was added to bath as the ferrous sulfate, ferrous ion prevented from the oxidation with citric acid. It was found that the hardness was increased as the concentration of ferrous ion, the ductility was slightly increased too. The appearance can obtain the wide bright deposits within 4g/$\ell$. The corrosion resistance drastically dropped from 5g/$\ell$ In the case of considering the effect of ferrous ion on the corrosion resistance and the appearance, the allowable limits is 4g/$\ell$, if the reductant is used.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11b
• /
• pp.319-321
• /
• 2003

This research was carried out to evaluate the removal efficiencies of CODcr and colour for the dyeing wastewater by ferrous solution in Fenton process. The results showed that COD was mainly removed by Fenton coagulation, where the ferric ions are formed in the initial step of Fenton reaction. On the other hand colour was removed by Fenton oxidation rather than Fenton coagulation. The removal mechanism of CODcr and colour was mainly coagulation by ferrous ion, ferric ion and Fenton oxidation. The removal efficiencies were dependent on the ferric ion amount at the beginning of the reaction. However the final removal efficiency of COD and colour was in the order of Fenton oxidation, ferric ion coagulation and ferrous ion coagulation. The reason of the highest removal efficiency by Fenton oxidation can be explained by the chain reactions with ferrous solution, ferric ion and hydrogen peroxide.

• Journal of Environmental Science International
• /
• v.13 no.11
• /
• pp.987-991
• /
• 2004

The purpose of this research is to evaluate the removal efficiencies of COD$\_$Cr/ and color for the dyeing wastewater by the different dosages of ferrous solution and H$_2$O$_2$ in Fenton process. In the case of H$_2$O$_2$ divided dosage for the Fenton's reagent 7:3 of H$_2$O$_2$ was more effective than 3:7 to remove COD$\_$Cr/ and color. The results showed that COD$\_$Cr/ was mainly removed by Fenton coagulation, where the ferric ions are formed in the initial step of Fenton reaction. On the other hand color was removed by Fenton oxidation rather than Fenton coagulation. The removal mechanism of COD$\_$Cr/ and color was mainly coagulation by ferrous ion, ferric ion and Fenton oxidation. The removal efficiencies were dependent on the ferric ion amount at the beginning of the reaction. However, the final removal efficiency of COD$\_$Cr/ and color was in the order of Fenton oxidation, ferric ion coagulation and ferrous ion coagulation. The reason of the highest removal efficiency by Fenton oxidation can be explained by the chain reactions with ferrous solution, ferric ion and hydrogen peroxide.

• The Korean Journal of Food And Nutrition
• /
• v.35 no.5
• /
• pp.313-323
• /
• 2022

To investigate antioxidant effects of tea tree root extracts using various extraction methods, cytotoxicity, DPPH and ABTS radical scavenging, SOD, nitrite scavenging activity and inhibitory activity of lipid peroxidation, reducing power, ferrous ion chelating activity were measured. Cytotoxicity for RAW 264.7 cells was not observed at concentrations treated with below 90 ㎍/mL in all extracts. The maximum DPPH radical, nitrite scavenging, SOD activity and inhibitory activity of lipid peroxidation were obtained at the ethylacetate and 70% ethanol extract. The maximum ABTS radical scavenging activity was obtained at the ethylacetate and hot water extract. However, in the case of reducing power and ferrous ion chelating activity, they were obtained at 70% ethanol and hexane extract, respectively. Nitrate scavenging activity showed the most excellent scavenging ability of 59.6% at 90 ㎍/mL of ethylacetate. The hexane extract had the highest ferrous ion chelating activity, showing 61.05% at 50 ㎍/mL, 66.07% at 70 ㎍/mL and 76.81% at 90 ㎍/mL, respectively. The results of this research show that the ethylacetate and 70% ethanol extracts of tea tree root can be used as a natural material for scavenging the radicals. However, future study is necessary to understand the mechanism of antioxidant activity by identification of substances.

• Korean Journal of Materials Research
• /
• v.20 no.6
• /
• pp.301-306
• /
• 2010

The chemical formula of magnetite ($Fe_3O_4$) is $FeO{\cdot}Fe_2O_3$, t magnetite being composed of divalent ferrous ion and trivalent ferric ion. In this study, the influence of the coexistence of ferrous and ferric ion on the formation of iron oxide was investigated. The effect of the co-precipitation parameters (equivalent ratio and reaction temperature) on the formation of iron oxide was investigated using ferric sulfate, ferrous sulfate and ammonia. The equivalent ratio was varied from 0.1 to 3.0 and the reaction temperature was varied from 25 to 75. The concentration of the three starting solutions was 0.01mole. Jarosite was formed when equivalent ratios were 0.1-0.25 and jarosite, goethite, magnetite were formed when equivalent ratios were 0.25-0.6. Single-phase magnetite was formed when the equivalent ratio was above 0.65. The crystallite size and median particle size of the magnetite decreased when the equivalent ratio was increased from 0.65 to 3.0. However, the crystallite size and median particle size of the magnetite increased when the reaction temperature was increased from $25^{\circ}C$ to $75^{\circ}C$. When ferric and ferrous sulfates were used together, the synthetic conditions to get single phase magnetite became simpler than when ferrous sulfate was used alone because of the co-existence of $Fe^{2+}$ and $Fe^{3+}$ in the solution.

• Korean Journal of Plant Resources
• /
• v.23 no.2
• /
• pp.123-130
• /
• 2010

Present studies were conducted to investigate the effects of autoclaving on antioxidant activities of Achillea alpina and Solodago virgurea. At early April, young leaves of 2 species were collected, subjected to autoclaving ($121^{\circ}C$, 1.2 atmospheric pressure, 15 minutes), freezed-dried, grinded, and extracted with 80% ethanol. The same process was repeated with unautoclaved control. Total polyphenol and flavonoid contents, scavenging activities on DPPH and ABTS radicals and ferrous ion chelating effects were analyzed. Extraction yield of autoclaved S. virgurea was 39.55% and A. alpina 28.15%. In both species, autoclaving significantly reduced scavenging activities on DPPH and ABTS radicals. On the contrary, ferrous ion chelating effects increased after autoclaving, especially in young leaves of A. alpina. Autoclaving resulted in decrease of polyphenol and flavonoid contents, especially in the A. alpina. The present experiments demonstrated that autoclaving had negative effects on antioxidant activities of A. alpina and S. virgurea, except in ferrous ion chelating effects. Young leaves of former species were unstable to heat treatment, resulting in big lose of antioxidant activity.

• Journal of the Korean Vacuum Society
• /
• v.4 no.S2
• /
• pp.106-114
• /
• 1995

Direct implantation of metallic ion species has been employed in surface processing of industrial components and tools with very encouraging improvements in recent years. In spite of high technicla effectiveness, this new surface processing technique has not been extensively accepted by industries mainly because of high cost(capital and operating) compared with other competitive surface processing techniques. High current and large implantation area with eliminating the mass analyzer and the beam-scanning unit make metal vapor vacuum are(MEVVA)source ion implantation versatile, simple and cheap to operate and well suited to commercial surface processing. In this paper, the recent development of MEVVA source ion implantation technique ar Beijing Normal University has been reviewed and the results of production trials of several industrial components and tools implanted by MEVVA source ion implantation have been presented and discussed.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.1
• /
• pp.35-42
• /
• 2000

Reaction characteristics of 4-methylcatechol 2,3-dioxygenase (4MC230) purified from Pseudomonas putida SU10 with a higher activity toward 4-methylcatechol than catechol or 3-cethylcatechol were studied by altering their physical and chemical properties. The enzyme exhibited a maximum activity at pH 7.5 and approximately 40% at pH 6.0 for 4-methylcatechol hydrolysis. The optimum temperature for the enzyme was around $35^{\circ}C$, since the enzyme was unstable at higher temperature. Acetone(10%) stabilized the 4MC230. The effects of solvent and other chemicals (inactivator or reactivator) for the reactivation of the 4MC230 were also investigated. Silver nitrate and hydrogen peroxid severely deactivated the enzyme and the deactivation by hydrogen peroxide severely deactivated the enzyme and the deactivation by hydrogen peroxide was mainly due to the oxidation of ferrous ion to ferric ion. Some solvents acted as an activator and protector for the enzyme from deactivation by hydrogen peroxide. Ascorbate, cysteine, or ferrous ion reactivated the deactivated enzyme by hydrogen peroxide. The addition of ferrous ion together with a reducing agent fully recovered the enzyme activity and increased its activity abut 2 times.

• The Korean Journal of Mycology
• /
• v.21 no.3
• /
• pp.157-164
• /
• 1993

The effects of the iron ions on the light-induced mitochondrial $F_1-ATPase$ in Lentinus edodes was studied. This enzyme activity was stimulated by each of the ferric, ferrous and magnesium ion. Especially, the activity of the enzyme by 5.0 mM ferric ion increased up to 107% in comparision with control group(100%). In the presence of magnesium ion, each of ferric and ferrous ion increased the activity of the enzyme, particulary, coexistence of 0.1 mM magnesium and 5.0 mM ferric ion increased the activity up to 270% with magnesium ion dependence. The activity of the enzyme was stimulated up to 268% by 5.0 mM ferric ion in the presence of 0.1 mM magnesium and 0.1 mM ferrous ion. Therefore, the coexistence of ferrous ion did not affect the activity. From the above, we propose that light-induced mitochondrial $F_1-ATPase$ in Lentinus edodes is a $Mg^{2+}{\cdot}Fe^{3+}{\;}F_1-ATPase.$ The optimal pH and temperature for the enzyme were 7.5 and $66^{\circ}C$ respectively.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2577-2583
• /
• 2009

Presented are the formation of iron oxide layers on evaporator tubes in an actual fossil power plant operated under all volatile treatment (AVT) condition and an experimental simulation of iron oxide formation in the presence of ferrous and ferric ions. After actual operations for 12781 and 36326 hr in the power plant, two iron oxide layers of magnetite on the evaporator tubes were found: a continuous inner layer and a porous outer layer. The experimental simulation (i.e., artificial corrosion in the presence of ferrous and ferric ions at 100 ppm level for 100 hr) reveals that ferrous ions turn the continuous inner oxide layer on tube metal to cracks and pores, while ferric ions facilitate the production of porous outer oxide layer consisting of large crystallites. Based on a comparison of the oxide layers produced in the experimental simulation with those observed on the actually used tubes, we propose possible routes for oxid layer formation schematically. In addition, the limits of the proposed corrosion routes are discussed in detail.