• 한국자기학회지
• /
• 제5권5호
• /
• pp.805-809
• /
• 1995

In order to widen the band-width of ferrite absorber, compositional effect on the complex permeability of Ni-Zn ferrite and the structure of grid absorber were studied. From the experimental results, we could determine the optimum composition composition of Ni-Zn ferrite and the structure of grid absorber. Also, we manufactured grid absorber and investigated its microwave absorbing characteristics. Calculation shows that the ferrite frid absorber suppresses reflection ${\leq}-20dB$ from 30 MHz to 700 MHz and the conventional ferrite tile absorber suppresses reflection ${\leq}20dB$ in the frequency range of 30 MHz-400 MHz. It was found that the microwave absorbing performance of the ferrite grid absorber was superior to the ferrite tile absorber.

• 한국세라믹학회지
• /
• 제28권7호
• /
• pp.556-560
• /
• 1991

The behavior of Ni-Zn ferrite/Mn-Zn ferrite composite electromagnetic absorber was investigated. The imaginary part of complex permeability of the composite was higher than that of either ferrite alone at all frequency range (50∼1400MHz) studied. The difference, which was pronounced in low frequency range, was reached the maximum value when the composite consisted of constituent ferrites with equal amount. Since the thickness in inversely proportional to the imaginary part of complex permeability for the ferrite absorber, it was possible to reduce the thickness of electromagnetic absorber by employing a composite of two different ferrites.

• 한국세라믹학회지
• /
• 제30권10호
• /
• pp.823-828
• /
• 1993

The performance of ferrite composite microwave absorber has been evaluated as the matching frequency, the matching thickness and the band width. Especially, matching frequency is very important in application of microwave absorber because it determines operating frequency range. In this study, the ferrite composite microwave absorbers consisted Ni-Zn ferrite and Zn2Y ferroxplana were prepared in order to control matching frequency. Then, the variation of the material constants and microwave absorbing characteristics were investigated with various ferrite mixing ratio. The material constants of ferrite composite microwave absorber could be controlled by variation ferrite mixing ratio. Therefore, it was confirm that matching frequency of microwave absorber could be shifted by control of material constants.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계합동학술대회 논문집
• /
• pp.45-49
• /
• 2002

In this paper, we have studied about electromagnetic wave absorbing properties of ferrite-rubber composite with a variation of ferrite. Amounts of ferrite in a composite absorber were changed from 52 wt.% to 62 wt.%. As a result, it has been shown that the electromagnetic wave absorbing properties of ferrite-rubber composite are related to the amount of ferrite in composite absorber. As a summary, it could be controled the electromagnetic wave absorbing property of ferrite-rubber composite by changing some kinds of annex A and amount of ferrite.

• 한국항해학회지
• /
• 제18권2호
• /
• pp.151-158
• /
• 1994

A wide band design method of an electromagnetic wave absorber using exponentially tapered ferrite, which has very wide band frequency characteristics, is proposed and discussed. The wide band electroma-gnetic wave absorber can be designed by the proposed equivalent material constants method for the re-gions varying spatially in the shape of ferrite. Futhermore, the wide band ferrite electromagnetic wave absorber with taper, which have not only exce-llent reflectivity frequency characteristics but also the band width of 30MHz to 2150 or 2450MHz under the tolerance limits of -20dB reflectivity, were designed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1478-1480
• /
• 1994

In this paper, the microwave absorption properties of two layered absorber were evaluated. The two layer absorber were composed of Ni-Zn ferrite/rubber absorber and Ferroxplana/rubber absorber. The most absorption properties condition were obtained when the transforming layer and absorbing layer were Ferroxplana/robber absorber and Ni -Zn ferrite/rubber absorber. respectivity. The optimal thickness of the transforming and the absorbing layer were 4(mm) and 1(mm), respective1y.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2002년도 춘계학술대회논문집
• /
• pp.53-57
• /
• 2002

In this paper, we explain new EM(electromagnetic) wave absorber that mixed NC (Natural Ceramics) and Ferrite with NL(Natural Lacquer). At first, a mixed NC and Ferrite(NC : F = (0.1~30)wt% : (99.9~70)wt%) bum at 95$0^{\circ}C$~125$0^{\circ}C$. And then, it is comminuted and injected into NL((NC+F) . NL = (30~80)wt% (70~20)wt%), finally we made Ferrite-NL EM wave absorber. Generally, conventional labor Ferrite covers only 500 MHz to 10 GHz under tolerance limits of 2 to 6 dB in absorption, and Ferrite-NL is over 8 ~ 14 dB. However, NCFerrite-NL huts superior absorption ability. It is over 16 to 19 dB through 500 MHz to 10 GHz.

• Journal of Magnetics
• /
• 제2권1호
• /
• pp.25-27
• /
• 1997

Ferrite tile absorber is of great concern for the application to anechoic chambers due to the growing demand of EMI or EMC measurements. This paper investigates the magnetic, dielectric and microwave absorbing properties of a Ni-An ferrite for the purpose. A design chart was constructed with the solutions of impedance-matching equation in the radio frequencies (30 MHz - 1 GHz). The material parameters for zero-reflection are predicted from the chart. The magnetic and dielectric properties of sintered Ni-Zn ferrite is found to be well suited for this requirements. A superior microwave absorbing properties (frequency band and absorber thickness) of the samples are demonstrated.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1994년도 춘계학술발표회
• /
• pp.43-48
• /
• 1994

A wide band design method of an electromagnetic wave absorber using exponentially tapered ferrite which has very wide band frequency characteristics is proposed and discussed. The wide band electromagnetic wave absorber can be designed by the proposed equivalent material constants method for the regions varying spatially in the shape of ferrite. Furthemore the wide band ferrite electromagnetic wave absorbers with taper which have not only excellent reflectivity frequency characteristics but also the band width of 30MHz to 2150 or 2450MHz under the tolerance limits of -20dB reflectivity were designed.

• 한국전자파학회논문지
• /
• 제9권4호
• /
• pp.483-490
• /
• 1998

The reflectivity of a grid ferrite electromagnetic wave absorber is analyzed using finite difference time domain (FDTD) method, which is usually used in anechoic chambers for EMI / EMS test. The frequency dispersive characteristics of ferrite medium and its boundary condition are modeled using magnetic flux in addition to E- and H-fields. By applying Floquets theorem, FDTD analysis of the grid ferrite absorber with periodic infinite array is simplified as a unit cell problem. The method of homogenization which is mainly utilized in the calculation of absorber reflectivity as a low frequency technique takes only into account volume fraction of the unit cell of the absorber except for the structure of medium geometry. However, the presented method in this paper can analyze the geometry effect of the unit cell with its medium characteristics up to high frequency region.