• Rapid Communication in Photoscience
• /
• 제4권2호
• /
• pp.34-36
• /
• 2015

New spectroscopic characteristics of amorphous ferric hydroxide ($Fe(OH)_3$), interestingly in the near infrared (NIR) region, are presented in this study. The absorption spectrum of ferric hydroxide covers wide spectral regions from ultraviolet to NIR (200~900 nm). Unique emission bands were newly observed in the NIR regions (800~1400 nm). Several bands of this NIR emission are quiet well overlapped with the combinational vibrational absorption bands of water. From photothermal conversion study, very interestingly, temperature of aqueous mixture solution including the amorphous ferric hydroxide was significantly increased from ambient temperature to $38^{\circ}C$ for 30 minutes under irradiation of a standard helium lamp.

• 한국대기환경학회지
• /
• 제31권2호
• /
• pp.173-180
• /
• 2015

The purpose of this study was to fabricate a ferric nitrate impregnated activated carbon, and the performance for hydrogen sulfide by adsorption was evaluated. Sodium hydroxide was utilized to control pH in the process during generation of ferric hydroxide on the surface of the carbon. Critical mixing duration for generation of ferric hydroxide on the carbon was 48 hrs at pH 1 of the solution, in which the chemical adsorption of hydrogen sulfide was enhanced. The adsorption capacity of the impregnated carbon increased up to 0.10 g hydrogen sulfide/g carbon, which was 4.3 times higher than that of the raw carbon. Presence of FeOOH on the surface of the impregnated carbon was examined by X-ray diffraction.

• Nuclear Engineering and Technology
• /
• 제4권4호
• /
• pp.327-330
• /
• 1972

낮은 방사능의 $^{99m}$ Mo으로부터 methyl ethyl ketone으로 추출하여 제조된 Na $^{99m}$ TcO$_4$를 가지고 폐검진에 사용되고 있는 $^{99m}$ Tc Ferric Hydroxide Macroaggregates를 제조하였으며 여러 pH 범위에서 입자의 크기와 수가 변하는 모양을 검토하였고 pH 6-7에서 평균입자의 크기가 scanning에 가장 적당한 20~60$\mu$이었다. 토끼와 인체에 주사하여 좋은 곁과를 얻었다.

• 한국세라믹학회지
• /
• 제24권3호
• /
• pp.215-222
• /
• 1987

${\alpha}$-Ferric Hydrous Oxide and ${\alpha}$-Ferric Oxide were obtained as following processes that Ferric Nitrate solution was adjusted to pH 6-8 with Ammonium Hydroxide, refluxed the Iron precipitate for 1 hr. at 80$^{\circ}C$, washed it with water and Methanol (95%), dried it to obtain ${\alpha}$-Ferric Hydrous Oxide at 60$^{\circ}C$, and then heated in atmosphere to prepare ${\alpha}$-Ferric Oxide for 1 hr. at 450$^{\circ}C$. Mica particles cleaned with ultrasonicator (45KHz) in water were mixed with Ferric Nitrate solution and treated it to adsorb ${\alpha}$-Ferric Oxide on the surface of mica particles by using the abovementioned processes, but the heated temperature was at 500$^{\circ}C$. The maximum wavelength of reflected light on the surface of mica-${\alpha}$-Ferric Oxide (50%) was appeared at 546nm but -Ferric Oxide free mica only was at 436 nm. The maximum wavelength was shifted to longer when the weight ratios of ${\alpha}$-Ferric Oxide to mica was changed from 1% to 50%.

• 한국자기학회지
• /
• 제21권5호
• /
• pp.157-162
• /
• 2011

황산제일철/황산제이철의 몰비와 침전제 종류(NaOH, $NH_4OH$)를 변화시켜 공침법으로 $Fe_3O_4$를 합성하였다. 합성한 분말의 특성을 평가한 결과 모든 실험조건(황산제일철/황산제이철의 몰비와 침전제의 종류)에서 단일상의 나노 크기 $Fe_3O_4$가 생성 되었다. NaOH를 침전제로 사용한 경우에 $NH_4OH$를 침전제로 사용한 경우보다 입자크기가 작고, 좁은 입도분포를 나타내었다. 동일한 침전제를 사용할 경우에는 혼합 황산철(황산제일철/황산제이철)의 몰비가 증가할수록 입자크기와 결정자 크기가 증가하였으며 입도 분포는 넓어졌다. 모든 실험조건에서 합성된 $Fe_3O_4$ 분말은 초상자성을 나타내었으며 침전제로 $NH_4OH$를 사용하고 혼합 황산철의 몰비를 2.5로 하였을 때 가장 높은 포화자화 값 72 emu/g을 갖는 $Fe_3O_4$를 합성할 수 있었다.

• 한국재료학회지
• /
• 제21권4호
• /
• pp.225-231
• /
• 2011

The effect of ferrous/ferric molar ratio on the formation of nano-sized magnetite particles was investigated by a co-precipitation method. Ferrous sulfate and ferric sulfate were used as iron sources and sodium hydroxide was used as a precipitant. In this experiment, the variables were the ferrous/ferric molar ratio (1.0, 1.25, 2.5 and 5.0) and the equivalent ratio (0.10, 0.25, 0.50, 0.75, 1.0, 2.0 and 3.0), while the reaction temperature ($25^{\circ}C$) and reaction time (30 min.) were fixed. Argon gas was flowed during the reactions to prevent the $Fe^{2+}$ from oxidizing in the air. Single-phase magnetite was synthesized when the equivalent ratio was above 2.0 with the ferrous/ferric molar ratios. However, goethite and magnetite were synthesized when the equivalent ratio was 1.0. The crystallinity of magnetite increased as the equivalent ratio increased up to 3.0. The crystallite size (5.6 to 11.6 nm), median particle size (15.4 to 19.5 nm), and saturation magnetization (43 to 71 $emu.g^{-1}$) changed depending on the ferrous/ferric molar ratio. The highest saturation magnetization (71 $emu.g^{-1}$) was obtained when the equivalent ratio was 3.0 and the ferrous/ferric molar ratio was 2.5.

• 한국자기학회지
• /
• 제6권4호
• /
• pp.225-234
• /
• 1996

자기 기록용 전구체에 적합한 침상형 $\alpha-Fe_{2}O_{3}$ 입자를 수열반응법에 의해 수용액 중에서 비정질 수산화제이철로부터 직접 제조하였다. Ellipsoidal 또는 rectangular 형상의 $\alpha-Fe_{2}O_{3}$ 입자는 염기도 10.75~11.75 범위에서 생성되었다. 구연산 농도가 증가함에 따라 침상 입자의 길이와 침상비는 점차 감소하였으며, 구연산 농도 $1.5{\times}10^{-4}\;mol$ 이상 일때는 침상형 $\alpha-Fe_{2}O_{3}$ 입자로의 결정화가 저해되었다. 수열 반응 온도 $140^{\circ}C$에서 가장 침상성이 우수한 $\alpha-Fe_{2}O_{3}$ 입자가 제조되었으며, $220^{\circ}C$ 이상에서는 침상형 입자의 생성을 기대할 수 없었다.

• Nuclear Medicine and Molecular Imaging
• /
• 제40권2호
• /
• pp.127-131
• /
• 2006

Radiosynovectomy has been used as an effective treatment in patients with resistant synovitis after failure of long-term medication and intraarticular steroid injection. Although $^{90}Y$ silicate/citrate, $^{186}Re$ sulfide, and $^{169}Er$ citrate were approved in Europe for the appropriate radiopharmaceuticals for radiosynovectomy other radionuclides such as $^{32}P$-chromic phosphate, $^{165}Dy$-ferric hydroxide macroaggregate, $^{188}Rh$-microspheres, $^{153}Sm-particulate, and $^{166}Ho$-ferric hydroxide macroaggregate have been used in many countries. Reported success rates range from 40% to 90% for the different joints and underlying disease. In Korea, $^{188}Re$-tin-colloid and $^{166}Ho$-chitosan complex are now using as the major radionuclides in radiosynovectomy with good clinical results. A study on radiation synovectomy using $^{188}Re$-tin-colloid for patients with Korean rheumatoid arthritis shows the treatment resulted in the improvement of arthritis and well tolerated in our study, the radiosynovectomy with $^{166}Ho$-chitosan complex in 53 hemophilic patients markedly decreased intra-articular bleeding frequency and need for coagulation factor. This review inculdes general priciples in the application of radiosynovectomy and the clinical experience in Korea.

• 한국염색가공학회지
• /
• 제14권2호
• /
• pp.40-50
• /
• 2002

In order to remove the pollutants effectively in the dye wastewater by chemical precipitation process, coagulation arid flocculation test were carried out using several coagulants on various reaction conditions. It was found that the Ferrous sulfate was the most effective coagulant for the removal of disperse dye(B79), and we could get the best result lot the removal of disperse dye(B56) in the aspects of TOC removal efficiency and sludge field. When the Ferrous sulfate dosage was $800mg/\ell$, the sludge settling velocity was very fast>, and the color was effectively removed in the disperse dye(B79) solution. Although the color removal was ineffective when the Alum was used as a coagulant, the sludge field was decreased in comparison with the Ferrous sulfate or the Ferric sulfate was used in the disperse dye(B56) solution. The general color removal effect for the disperse dye(B56 and B79) solutions, the Ferric sulfate was more proper coagulant than the Alum. It was showed that TOC removal was improved 5% and over by the addition of Calcium hydroxide, and $30mg/\ell$ of sludge yield was decreased(B79). When Alum or Ferric sulfate was used as a coagulant, pH condition for most effective color removal was 5 in B56 solution. In case of Ferrous sulfate as a coagulant, most effective pH condition for color removal was 9. When Ferric sulfate or Ferrous sulfate was used as a coagulant, pH condition for most effective color removal was 9 in B79 solution.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권5호
• /
• pp.10-17
• /
• 2022

Inorganic acids such as HCl, HNO₃, and H₂SO₄ have been commonly applied to soil washing of heavy metals-contaminated soil due to their cost-effectiveness. However, implementing the 'Chemical Substance Control Act' requires off-site risk assessment of the chemicals used in the soil washing. Therefore, in this study, organic acids or Fe(III)-based washing agents were evaluated to replace commonly used inorganic acids. Ferric removed heavy metals via H⁺ generated by hydrolysis, which is similar to the HCl used in the control group. Oxalic acid and citric acid were effective to remove Cu, Zn, and Cd from soil. Organic acids could not remove Pb because they could form Pb-organic acid complexes with low solubility. Furthermore, Pb could be adsorbed onto the iron-organic acid complex on the soil surface. Ferric could remove exchangeable-carbonate, Fe-Mn hydroxide, and organic matter and sulfides bound heavy metals (F1, F2, and F3). Organic acids could remove the exchangeable-carbonate and Fe-Mn hydroxide bound metals (F1&F2). Therefore, this research shows that the fractionation of heavy metals in the soil and the properties of washing agents should be considered in the selection of agents in the process design.