• Hip & pelvis
• /
• v.30 no.4
• /
• pp.269-275
• /
• 2018

Purpose: The purpose of this study is to describe a method of inserting cement in the femoral head before fixation with dynamic hip screw to prevent screw cut out due to osteoporosis and to evaluate its clinical outcome in these patients. Materials and Methods: In this prospective study, 30 patients aged 60 years and older with intertrochanteric fracture were included. Bone mineral density was measured. After reaming of the femoral head and neck with a triple reamer and polymethyl methacrylate, bone cement was introduced into the femoral head using a customized nozzle and a barrel fitted on a cement gun. A Richard screw was inserted and the plate was fixed over the femoral shaft. Patients were mobilized and clinical outcomes were rated using the Salvati and Wilson's scoring system. Results: More patients included in this study were between 66 and 70 years old than any other age group. The most common fracture according to the Orthopaedic Trauma Association classification was type 31A2.2 (46.7%). The T-score was found to be $-2.506{\pm}0.22$ (mean${\pm}$standard deviation); all patients were within the range of -2.0 to -2.8. The duration of radiological union was $13.67{\pm}1.77$ weeks. Salvati and Wilson's scoring at 12 months of follow up was $30.96{\pm}4.97$. The majority of patients were able to perform their normal routine activities; none experienced implant failure or screw cut out. Conclusion: Bone cement augmentation may effectively prevent osteoporosis-related hardware complications like screw cut out in elderly patients experiencing intertrochanteric fractures.

• Journal of Biomedical Engineering Research
• /
• v.29 no.6
• /
• pp.451-456
• /
• 2008

Total knee arthroplasty(TKA) using computer-assisted navigation has been increased in order to improve the accuracy of femoral and tibial components implantation. Recently, a few clinical studies have reported on the femoral stress fracture after TKA using computer-assisted navigation. The purpose of this study is to investigate the stress concentration around the femoral pin-hole for different pin-hole diameter, the modes of pin penetration by finite element analysis to understand the effects of pin-hole parameters on femoral stress fracture risk. A three-dimensional finite element model of a male femur was reconstructed from 1 mm thick computed tomography(CT) images. The bone was rigidly fixed to a 25 mm above the distal end and 1500 N of axial compressive force and 12 Nm of axial torsion were applied at the femoral head. For all cases, transcortical pin penetration mode showed the highest stress fracture risk and unicortical pin penetration mode showed the lowest stress concentration. Pin-hole diameter increased the stress concentration, but pin number did not increase the stress dramatically. The results of this study provided a biomechanical guideline for pin-hole fracture risk of the computer navigated TKA.

• Journal of Korean Foot and Ankle Society
• /
• v.11 no.1
• /
• pp.111-114
• /
• 2007

Open calcaneal fracture with more than lateral half of bone loss and soft tissue defect occurred in 17 year-old male patient due to motor vehicle accident. Soft tissue defect included heel pad, peroneal tendon. Bone loss involved mainly most part of inferior tuberosity but not subtalar joint. Open dressing and debridement were done daily in operating room and antibiotics administration was started. After granulation tissue formed, femoral head allograft was performed and fixed with 6.0 mm screws to replace bone defect. Soft tissue defect was covered with latissimus dorsi musculocutaneous free flap. No sign of infection nor major osteolysis was observed in 15 months follow up period. Soft tissue defect was covered with latissimus dorsi musculocutaneous free flap.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2004.11a
• /
• pp.355-361
• /
• 2004

Ceramic femoral heads in the total hip replacement have been developed to reduce the polyethylene liner wear, Alumina and zirconia (3Y-TZP) having the excellent tribological properties are coupled against acetabular cups of polyethylene and are used in clinical application worldwide. However, alumina has a risk of catastrophic failure, and zirconia has the low temperature degradation in spite of enhanced fracture toughness. Recently, novel zirconia/alumina composite is very attractive due to the low temperature degradation (LTD)-free character and high fracture toughness. In the present study, we focus on the wear of ceramic on ceramic, which are able to be used as femoral heads and acetabular cups. Therefore, LTD-free zirconia/alumina composites with three compositions are made in a form of disk and cylinder, and the wear of the composites is performed on pin-on-disk type wear tester. The wear is conducted with or without lubricant. All the composites fabricated with the different composition show the good wear resistance.

• Journal of Korean Foot and Ankle Society
• /
• v.18 no.2
• /
• pp.76-79
• /
• 2014

In treatment of failure in ankle joint replacement therapy, talar avascular necrosis with massive bone defect, talus fracture with severe comminution and bone defect and ankle dislocation, treatment of large bone defects is considerably important for ankle joint stability and union, therefore, the choice of treatment for large bone defects is use of femoral head or iliac crest bone graft and rigid internal fixation. Because first generation total ankle arthroplasty performed for the first time using a cemented fixation technique requires a large amount of bone resection during re-surgery and there is some possibility of a larger bone defect after removal of implants, in cases where prosthesis for the defect is needed, performance of palliative femoral head or iliac crest bone graft and rigid internal fixation can be difficult. We report on a case of a 48-year-old woman who had experienced ankle pain for 25 years since undergoing total ankle arthroplasty. Because the patient had little ankle motion and rigid soft tissue despite a large bone defect caused by aseptic loosening, a good outcome was obtained only for the femoral cancellous bone graft using allo femoral head without internal fixation.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.91-94
• /
• 2003

Ceramic femoral heads in the total hip replacement have been developed to reduce the polyethylene liner wear. Alumina and zirconia (3Y-TZP) are using in clinical application worldwide and there are many good test reports. However, alumina has a risk of catastrophic failure, and zirconia has the low temperature degradation in spite of enhanced fracture toughness. Recently, novel zirconia/alumina composite having low temperature degradation-free character and high fracture tough . was developed and it leads the lower wear 3f polyethylene than alumina and zirconia. In the present study, in order to optimise the microstructure of low temperature degradation (LTD)-free zirconia/alumina composite for the best wear resistance of polyethylene, various compositions of (LTD)-free zirconia/alumina composites were fabricated, and the sliding wear of UHMWPE against these novel composites were examined and compared with that against alumina and zirconia ceramics used for total hip joint heads.

• Journal of Veterinary Clinics
• /
• v.18 no.3
• /
• pp.243-248
• /
• 2001

Radiographic findings of degenerative joint disease (DJD) in the coxofemoral joints were studied in 108 dogs referred to Veterinary Medical Teaching Hospital, College of Veterinary Medicine, Seoul National University. Radiographic findings were identified with a extended ventrodorsal projection. Clinical signs such as pain in the affected joint, exercise intolerance, lameness, crepitation on flexion and extension of the joint and decreased range of motion, were shown in 40% and radiographic changes of bilateral coxofemoral joints were identified in 69% of a group of dogs. There are no sex predilections. Thirty-seven dogs were diagnosed as canine hip dysplasia (CHD; 10 cases), avascular necrosis of the femoral head (Legg-Calves-Perthes disease [LCPD]; 12 cases), fracture of the acetabulum (1 case), luxation(10 cases) and subluxation (15 cases), however, luxation and subluxation were identified in 11 dogs affected with CHD and LCPD. Causes of DJD in others (71case) were not identified. Radio-graphic findings identified included osteophyte formation at the attachment of the joint capsule (70%), sclerosis of the subchondral bone of the cranial acetabular edge (47%), remodeling of the femoral head (34%), thickening of the femoral neck(31%), perichondral osteophyte formation (31%), joint laxity (30%) and so on. All of the dogs diagnosed as CHD were large breed such as Retriever, Germain Shepherd, and Weimaraner and their age was under 1 year. This condition occurred bilaterally in 70% of affected animals. Dogs diagnosed as LCPD were young (under 1 year), small breed dogs. The incidence of LCPD is greater in Yorkshire Terrier, Miniature Pinscher and Poodle. This condition occurred unilaterally in 67% of affected animals. Clinical signs of dogs with unknown cause were shown in 15% and this condition occurred bilaterally in 75% of affected animals. Radiographic findings varied with patient's age and breed, however, the most common finding was osteophyte formation at the attachment of the joint capsule.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.459-465
• /
• 2011

It has been reported that the femoral morphology has a major correlation to femoral neck fractures(FNF). Previous studies to analyze these correlations have relied on mechanical testing and finite element methods. However, these methods have not been widely applied to various femur samples and models. It is because of the availability of the samples from both patients and cadavers, and also of the geometric limitations in changing the shape of the models. In this study we analyzed femoral neck fractures using a parameterized femoral model that could provide flexibility in changing the geometry of the model for the wide applications of FNF analysis. With the parameterization a variety of models could be generated by changing four major dimensions: femoral head diameter(FHD), femoral neck diameter(FND), femoral neck length(FNL), and neck-shaft angle(NSA). We have performed FEA on the models to compute the stress distributions and reaction forces, and compare them with the data previously generated from mechanical testing. The analysis results indicate that the FND is significantly related with the FNF and the FHD is not significantly related with the FNF.

• Journal of Veterinary Clinics
• /
• v.25 no.1
• /
• pp.9-14
• /
• 2008

This purpose of this study was to describe and compare the radiographic and computed tomographic(CT) appearance of the experimentally induced Legg-Calve-Perthes Disease(LCPD) in dogs. LCPD was experimentally induced at the left femoral head in 7 litters of a dog. The lesions were evaluated with radiography, CT, and contrast CT every week from day 7 to day 70 after operation. Histopathologic examination was performed on 92th day after operation. Every images were evaluated according to the staging system of the osteonecrosis published by Association Research of Circulation Osseous in 1997 and the scoring(0-4). On CT scan, diffuse porotic lesion and focal sclerotic lesion were detected on day 14 and on day 21 after operation, respectively. Subchondral fracture, articular collapse and crescent sign with decreased attenuation were shown on day 28 after operation for the first time and no change of the sign were detected from operation day 9 to day 70 after operation. Focal porotic lesion and irregular radiopacity of femoral head were detected on day $41{\pm}7.48$ and on day $51{\pm}5.29$ after operation respectively on radiographs. In scoring evaluation, 2.00 was scored on day 14 after operation on CT scan, on day 56 after operation on radiographs, respectively This study has shown that CT is more suitable for early diagnosis of LCPB and has superior sensitivity than radiography. Also, CT has been expected to be important for staging and treatment of LCPD.

• Journal of Veterinary Clinics
• /
• v.24 no.4
• /
• pp.631-635
• /
• 2007

Luxation of the hip is the most common luxation seen in small animals. Luxations are classified by the direction in which the femoral head lies in relation to the acetabulum and craniodorsal luxations are the most common type. Recommendations for treatment are based on the presence of preexisting disease, the type and duration of luxation and severity of concurrent injuries. In this study modified external skeletal fixation was used for craniodorsal coxofemoral luxation in 5 dogs. Luxated head Joint was reduced and fixator pins were applied into the greater trochanter, the middle point of iliac body and the lateral surface of sacroiliac joint in a closed fashion. Reduction was successful in 4 of the 5 operated limbs. Complications noted in this study included pin tract drainage, pin loosening and secondary fracture at the pin insertion site.