• Journal of Chest Surgery
• /
• 제21권6호
• /
• pp.1078-1083
• /
• 1988

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.239-242
• /
• 2005

In the roll forming, a flat strip is progressively deformed by feeding it through a series of rotating rolls. There are various layouts for the tube toll-forming stages. The process sequences are as follows: leveling, roll-forming, welding, bead removing, seam annealing, cooling, sizing and cutting. Electric resistance welded(ERW) tubes have been widely used for the machinery parts, especially for hydroformed automotive parts. However conventional ERW tubes do not have a high formability because of hardening of welded portion by rapid cooling. Moreover the decrease in thickness of the welded portion during the grinding of the inner and outer bead may reduce the formability of the tube. In case of applying the tubular parts without grinding the bead, the flow of the fluid can be prevented due to the turbulent flow induced by the inner bead. In attempt to determine the optimal bead grinding amount in the roll forming process, in the present paper, the effects of the removal depth and width of the inner beads on the hydroformability are analyzed by the finite element simulation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.241-244
• /
• 2003

The productivity of hydroforming process can be increased by combining pre-forming process and post-forming process such as the bending, piercing and the embedding process. Therefore in this study, integrated studies on the hydro-embedding technology have been performed by analyzing the deformed mode of the tubes and the optimal process parameters. In the case of the embedding test the characteristics of the embedded parts, such as the shape of the screw tip, screw thread and shape of thread were investigated at various process conditions. To measure the clamping force between the embedded part and the tube, special measuring device was used.

• Journal of Welding and Joining
• /
• 제14권5호
• /
• pp.87-94
• /
• 1996

It has been well known in GMA welding process that wire feeding speed (WFS) or deposition rate increases linealy with the increase of wire extension. In this investigation, however, such an well-known relationship was .reconsidered in terms of contact-tube to work distance (CTWD) instead of wire extension. To verify the proposed relationship between WFS and CTWD, bead-on-plate welding was performed with various CTWDs in the range of 15∼35mm under the condition of near-constant voltage and current As expected, the test results showed an excellent linear relation between WFS and CTWD. Furthermore, the value of the slope turned out to be quite similar to those of previous investigators obtained either theoretically or experimentally through the Precise measurement of electrode extension. Present result also demonstred that the increase of CTWD could be very practical measure for increaring deposition rate without any increase of heat input Depending on the tip recess the practical maximum of CTWD was appeared to be limited somewhere in 25∼30mm mainly due to the entrappment of porocity.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제18권2호
• /
• pp.128-133
• /
• 2015

We present a case of an 8-year-old boy with visceral autonomic neuropathy complicated by Guillain-Barre syndrome. In this pediatric patient, gastroparesis was the major symptom among the autonomic symptoms. Due to the gastroparesis, there was no progress with the oral diet, and nutrition was therefore supplied through a nasojejunal tube and gastrojejunal tube via Percutaneous endoscopic gastrostomy (PEG). After tube feeding for 9 months, the patient's gastrointestinal symptoms improved and his oral ingestion increased. The pediatric patient was maintained well without gastrointestinal symptoms for 3 months after removal of the PEG, had repeated vomiting episodes which lead to the suspicion of cyclic vomiting syndrome. Then he started treatment with low-dose amitriptyline, which resulted in improvement. Currently, the patient has been maintained well for 6 months without recurrence, and his present growth status is normal.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.642-647
• /
• 2007

Determination of loading conditions for tube hydroforming(THF) process that implies an amount of the increment in axial feeding and internal pressure for each step is one of the most important constituents at the process design level. On account of the fact that those design factors mentioned above are imposed simultaneously during the process, suitable loading conditions are required to obtain robust products without any failure such as buckling, necking, bursting and so on. In which, especially, bursting is well known as the most frequently occurred failure in general THF process. In this study, therefore, determination of the loading condition based on the adaptive method was carried out to obtain safe loading paths. In addition, forming limit curves are applied to evaluate the derived loading conditions by using the simulation results. Consequently, it is found that described method in this study for THF process design is useful and has a feasibility.

• 소성∙가공
• /
• 제10권7호
• /
• pp.534-542
• /
• 2001

Tubular hydroforming has attracted increased attention in the automotive industry recently. In this study, a professional finite element program for analysis and design of tube hydroforming processes, has been developed, called HydroFORM-3D, which is based on a rigid-plastic model. With the developed program HydroFORM-3D, the hydroforming process for an automobile lower arm is analyzed and designed. The manufacturing process for a lower arm consists of tube bending, preforming, and final hydroforming. To accomplish successful hydroforming process design, thorough investigation on proper combination of process parameters such as internal hydraulic pressure, axial feeding, and tool geometry is required. This paper describes the influences of forming conditions on the hydroforming of a lower arm by using simulation to predict strain and tube shape during bending, preforming, and final hydroforming processes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1810-1815
• /
• 2003

Tube hydroforming provides a number of advantages over conventional stamping process, including fewer secondary operation, weight reduction, assembly simplification, adaptability to forming of complex structural components and improved structural strength and stiffness. In this study, the effect of the heat treatment on the hydro-formability has been investigated. By using the mild steel tube bulging test is performed at various heat treatment conditions to evaluate the hydro-formability.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.240-243
• /
• 2003

Finite element analyses for bursting failure prediction in bulge forming under combined internal pressure and independent axial feeding are carried out. By means of the FEM combined with Oyane's ductile fracture criterion based on Hills quadratic plastic potential, the forming limit and bursting pressure level are investigated for a seamed tube that comprises of weldment, heat affected zone(HAZ) and base material parts. Especially, in order to determine the material property of HAZ tensile tests for the base material and the weld metal are executed based on iso-strain approach. Finally, through a series of bulge forming simulations with consideration of the weldment and HAZ it is concluded that the proposed method would be able to predict the bursting pressure and fracture initiation site more realistically, so the approach can be extended to a wide range of practical bulge forming processes.

• Journal of Nutrition and Health
• /
• 제32권3호
• /
• pp.230-238
• /
• 1999

The present study was conducted to investigate te effect of sea tangle and hypoglycemic agent(Metformin) on lipid peroxidation and antioxidants levels in normal and diabetic rats. Male Sprague-Dawley rats were fed AIN-76 based experimental diets containing 5% (w/w) cellulose or 15%(w/w) sea tangle for 3 weeks, and then rats of diabetic groups were rendered diabetic by intramuscular injection of streptozotocin(STZ, 45mg/kg BW). After induction of diabetes Metformin(350mg/kg BW) was given once a day using a feeding tube for 5 days. Blood glucose level in diabetic rats fed sea tangle was significantly lower than that of diabetic rats fed cellulose. Metformin feeding resulted in further lowering blood glucose. Plasma and liver microsomal levels of lipid peroxides were increased significantly in diabetic rats as compared to normal rats, and the plasma level tended to be decreased by sea tangle feeding. Plasma level of retinol was reduced by STZ treatment, but it was increased by Metformin feeding in diabetic rats fed sea tangle. The liver contents of retinyl plamitate were reduced in diabetic rats but recovered by sea tangle feeding to some extent. Liver contents of total vitamin A were increased significantly by sea tangle in diabetic rats. Although difference in either plasma or liver level of $\alpha$-tocopherol by diet and STZ treatment was not significant, $\alpha$-tocopherol levels were the highest in the group with simultaneous feeding of sea tangle and metformin. Liver contents of zinc and copper were not influenced by either STZ treatment or sea tangle feeding. The present study indicates that the lowering blood glucose level could be attained by simultaneous trial of sea tangle diet and hypoglycemic agent and the increased oxidative stress caused by STZz treatment could be relieved by sea tangle feeding.