• Journal of Biosystems Engineering
• /
• v.37 no.6
• /
• pp.373-384
• /
• 2012

Purpose: In EU, the animal welfare regulations are strengthening. Also, in Korea, for strengthening of animal protection laws, animal welfare farm certification scheme is being prepared to enforce. To get the certification of animal welfare farm, especially for sows, individual specific feeding in sow group is necessary in accordance with the animal welfare regulation. Also, liquid feeding is reported to be more effective for farrowing as well as dry sow. Therefore, in this study, a electronic liquid sow feeder using RFID which could be fed to farrowing sow simultaneously is developed. Methods : We manufactured a prototype of appropriate elements which were evaluated in the preliminary test for selecting RFID tag, supply pump, mixing type, etc. With the prototype, the performance test for liquid feeding gilt was done in group raising training barn. Results : The performance test result shows the C.V.(coefficient of variation) of liquid mixing and feeding is 0.77~1.97% and 2.4~5.3%, respectively, which means the system could feed sows uniformly. The feeding time of pneumatically activated ball valve is 2 seconds per 0.9 kg of liquid feed. The eating time for gilt were 65 seconds in average. Conclusions : The prototype could feed sow uniformly, and deliver the liquid feed 9 times for a sow continuously. Also, total eating time for a sow was 18 minutes in one visit to the prototype of feeding station.

• Journal of Korea Foundry Society
• /
• v.43 no.6
• /
• pp.294-301
• /
• 2023

The effects of Cu on feeding and macro-porosity characteristics were investigated in hypo- (A356 and 319) and hypereutectic (391) aluminum-silicon alloys. T-section and Tatur tests showed that the feeding and macro-porosity characteristics were significantly different between the hypo- and hypereutectic alloys. The hole and the pipe in the T-section and the Tatur casting in hypereutectic alloy showed a rough and irregular shape due to the faceted growth of the primary silicon, while the results of the hypoeutectic alloys exhibited a rather smooth surface. However, the addition of Cu did not strongly affect the macro-feeding behavior. It is known that copper segregates and interferes the feeding process in the last stage of solidification, possibly leading to form more amount of micro shrinkage porosity by the addition of Cu. The macro porosity formation mechanism and feeding properties were discussed upon T-section and Tatur tests together with an alloying addition.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.6
• /
• pp.50-56
• /
• 1994

This is an experimental study on the performance characteristics of Diesel Automobile with ultrasonic fuel feeding system. For this purpose, ultrasonic fuel feeding system was made and atomization characteristics was measured. Base on this result, carried out engine dynamometer test to investigate the performance characteristics of diesel automobile with ultrasonic fuel feeding system in comparison with conventional diesel fuel injector. The results are as follows. 1) In the spray characteristics test, fuel particle sizes were decreased about 11%~21%. 2) In engine dynamometer test, -The power was increased about 5%~11%. -The thermal efficiency was improved about 6%~11%. -The specific fuel consumption was improved about 6%~19%. -The smoke concentration was decreased about 11%~50%.

• The Journal of the Korea Contents Association
• /
• v.17 no.6
• /
• pp.329-338
• /
• 2017

The purpose of this study was to develop the couple breast-feeding education program and to investigate the effects of program on breast-feeding self-efficacy, spouse support and breast-feeding satisfaction of primipara. The 3 session(20-40 min/one day) the breastfeeding spouses education program was developed and a non-equivalent control group quasi-experiment design was used. Sixty-three participants were assigned to either the experimental group (n=32) or the control group (n=31). A pre-test and post-test were done to identify the effect of the program. Effects were tested using $x^2$-test, t-test. Scores for breast-feeding self-efficacy(t=3.44, p=.001), spouse support(t=3.03, p=.004) and breast-feeding satisfaction(t=3.64, p=.001) of the experimental group after program were significantly higher than the control group scores. The effects of the couple breast-feeding education program for elevating breast-feeding self-efficacy, spouse support and breast-feeding satisfaction of primipara were validated. Therefore, this program can be recommended for vigorous use in clinical practice.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.3
• /
• pp.22-29
• /
• 2003

The propulsion feeding system of KSR-III is composed of tubes, valves and PSC, and controls the flow of propellant entering to engine. The test of PTA-I is carried out to verify the characteristic of propulsion feeding system and component. The tests of operation characteristic of component, hydraulic characteristic of tubes, flow control using venturi, oscillation of dynamic pressure, characteristic of regulator are carried out. Troubles of component are found out, and renewed, and the performance of the propulsion feeding system is verified through PTA-I. The results of PTA-I are used to the configuration of propulsion feeding system and test of PTA-II.

• Journal of the Korean Society of School Health
• /
• v.27 no.2
• /
• pp.69-79
• /
• 2014

Purpose: The purpose of this study was to evaluate middle school students' knowledge and attitudes related to breast feeding. Methods: The knowledge and attitudes related to breast feeding were measured by structured questionnaires. Data were analyzed by descriptive statistics, t-test, one-way ANOVA, and Pearson correlation, using the SPSS/WIN 17.0 program. Results: The level of knowledge of breast feeding was 9.02 points out of 25 points, in average. Attitudes towards breast feeding was 3.77 points out of 5 points, in average. There were significant differences in the knowledge of breast feeding according to grade, feeding type, family type, experiences of observing breast feeding, experiences of obtaining breast feeding information, will to practice breast feeding, and the reasons for low breast feeding rate. There were significant differences in attitudes towards breast feeding according to gender, grade, feeding type, family type, experiences of observing breast feeding, experiences of obtaining breast feeding information, timing of breast feeding education, will to practice breast feeding, and the reasons for low breast feeding rate. There was a significant positive correlation between the knowledge of breast feeding and attitudes towards breast feeding. Conclusion: Middle school students should be provided with various education programs to improve their knowledge of and attitudes toward breast feeding.

• Child Health Nursing Research
• /
• v.20 no.1
• /
• pp.20-29
• /
• 2014

Purpose: The purpose of this study was to develop a feeding protocol for premature infants and to evaluate the effects of protocol. Methods: The feeding protocol was developed through a literature review and discussions of an expert group. The developed feeding protocol was tested with 85 preterm infants in one neonatal intensive care unit in B city. A non-equivalent control group non-synchronized design was used. Data were collected from January 1 to April 30, 2013 for the control group and from June 1 to September 30, 2013 for the experimental group. The experimental group (n=38) received the feeding protocol, whereas the control group (n=47) had routine feeding care. Collected data were analyzed by t-test and -test using SPSS/WIN version 18.0. Results: First feeding time (t=2.22, p=.029) and full enteral feeding time (t=2.28, p=.026) were significantly decreased in the experimental group compared to the control group. There was no difference in incidence of complications (p>.05). Also no significant differences in weight reduction rate between the two groups were observed at the 7th postnatal day (t=-1.23, p=.222). Conclusion: The results indicate that the feeding protocol for preterm infants is effective in decreasing first feeding time and full enteral feeding time.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.2
• /
• pp.331-337
• /
• 2015

The power flow analysis of electrified railway is required complicated calculation, because of variable load. Train runs trough rail supplied by electric power therefore, the load value in electrified railway system fluctuates along time. The power flow algorithm in electrified railway system is different from general power system, and the power flow simulation is peformed by the particular simulation software. Powerail is simulation software for analysis of traction power supply system developed by KRRI, in 2008. This consists of load forecasting module, including TPS and time scheduling, and power flow module. This software was verified by measured current under normal feeding condition, however, has not been verified by voltage on the condition of extended feeding. This paper presents the verification of PowerRail based on voltage drop under extended feeding condition. This is performed by comparing simulation result with field test. Field test and simulation is done in commercial railway line.

• Journal of Korean Society on Water Environment
• /
• v.20 no.1
• /
• pp.48-54
• /
• 2004

Two methods, a Ceriodaphnia algal uptake suppression test (CAUST) and a new toxicity test based on temperature control (TTBTC) which are based on feeding behaviour and temperature control, respectively, were developed and compared for the adoption as the better methodology for short-term toxicity screening. As previously published by Lee et aI., (1997), the CAUST method is based on the feeding behaviour of C. dubia and requires as little as 1 hour of contact time between C. dubia neonates and toxicant. However, even though CAUST requires only 1 hour of contact time, this method still take many hours for the preparation and measurement. Before the test starts, neonate digestive tracts were cleared by feeding yeast to the daphnids, Neonates were then exposed to toxicant, followed by addition of Scenedesmus subspiatus into the bioassay vessels. Daphnids were examined under the bright-field microscope with the presence of algae (indicated by a green colored digestive tract) or the absence of algae. Uptake indicated no toxic effect, whereas, absence of uptake indicated toxic inhibition. Unlike CAUST, the newly developed method (TTBTC) is based on just temperature control for the toxicity test of C. dubia. Initially, neonates are exposed to toxicants while the temperature of water bath containing media increased to $35.5^{\circ}C$. After 1.25 hour of contact time, the number of the daphnids, either live (no toxic effect) or dead (toxic effect), is counted without the aid of any instrument. In both methods, median effective concentrations ($EC_{50}$ values) were computed based on the results over a range of dosed toxicant concentrations. It showed that TTBTC was as sensitive as the standard 48-hour acute bioassay and CAUST. TTBTC and CAUST were much more sensitive than the I-hour I.Q. test and 30-minute Microtox. This study indicates that TTBTC is an easier and more rapid toxicity test than the standard 48-hour acute bioassay and even CAUST.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3
• /
• pp.380-387
• /
• 2013

In this study, two finite element (FE) models were developed to evaluate the thermal characteristics of a feeding axis of a CNC lathe. One was used for analysis of heat transfer to identify the temperature distribution of the feeding axis and then, the other was used for analysis of thermal deformation to evaluate its structural behavior based on the temperature distribution. The FE models were based on the test standard for the axial thermal displacement. The feeding velocity was composed of three steps: the ascending, constant, and descending velocities. Therefore, the heat generation and convection coefficient were calculated for each velocity and applied to the thermal FE model. The convection coefficient for the ball screw rotation was based on an experimental equation. The result of the analytical thermal displacement was compared with that of the experimental displacement to verify the finite element models.