• 제목/요약/키워드: Feeding network

검색결과 161건 처리시간 0.023초

Milk Fat Substitution by Microparticulated Protein in Reduced-fat Cheese Emulsion: The Effects on Stability, Microstructure, Rheological and Sensory Properties

  • Urgu, Muge;Turk, Aylin;Unluturk, Sevcan;Kaymak-Ertekin, Figen;Koca, Nurcan
    • 한국축산식품학회지
    • /
    • 제39권1호
    • /
    • pp.23-34
    • /
    • 2019
  • Fat reduction in the formulation of cheese emulsion causes problems in its flowability and functional characteristics during spray-dried cheese powder production. In order to eliminate these problems, the potential of using microparticulated whey protein (MWP) in cheese emulsions was examined in this study. Reduced-fat white-brined cheese emulsions (RF) with different dry-matters (DM) (15%, 20%, and 25% excluding emulsifying salt) were produced using various MWP concentrations (0%-20% based on cheese DM of emulsion). Their key characteristics were compared to full-fat cheese emulsion (FF). MWP addition had no influence on prevention of the phase separation observed in the instable group (RF 15). The most notable effect of using MWP was a reduction in apparent viscosity of RF which significantly increased by fat reduction. Moreover, increasing the amount of MWP led to a decrease in the values of consistency index and an increase in the values of flow behavior index. On the other hand, using high amounts of MWP made the emulsion more liquid-like compared to full-fat counterpart. MWP utilization also resulted in similar lightness and yellowness parameters in RF as their full-fat counterparts. MWP in RF increased glossiness and flowability scores, while decreased mouth coating scores in sensory analyses. Fat reduction caused a more compact network, while a porous structure similar to FF was observed with MWP addition to RF. In conclusion, MWP showed a good potential for formulation of reduced-fat cheese emulsions with rheological and sensorial characteristics suitable to be used as the feeding liquid in the spray drying process.

유기재배와 관행재배 사과원 내 지표 배회성 절지동물 군집에 대한 잡초 관리의 영향 (Influence of Weed Management Practices on Ground-dwelling Arthropod Assemblages in Organic and Conventional Apple Orchards)

  • 김지원;정철의
    • 한국응용곤충학회지
    • /
    • 제60권1호
    • /
    • pp.105-114
    • /
    • 2021
  • 초식, 포식, 분해 등 생태학적 서비스를 제공하는 지표 배회성 절지동물은 사과원의 중요한 구성 요소이며, 이들의 군집에 영향을 미치는 잡초는 유기재배와 관행재배 사과원에서 다르게 관리된다. 잡초 관리와 관련된 과수원 관리가 지표 배회성 절지동물의 풍부도와 다양도에 미치는 영향을 평가하기 위해 3년간 연구를 수행하였다. 대부분의 절지동물은 상위분류군과 섭식 기능군으로 분류하였으며, 딱정벌레류는 종 수준으로 분류하였다. 지표 배회성 절지동물의 주요 우점군은 딱정벌레목으로 나타났다. 초식자와 포식자의 풍부도는 유기재배 사과원에서 높은 결과를 보였으며, 딱정벌레류의 풍부도와 다양도 또한 관행재배 과원보다 유기재배 사과원에서 높은 결과를 보였다. 거미목, 딱정벌레목 또는 딱정벌레류의 풍부도는 잡초 관리 빈도와 음의 상관관계를 보였다. 지표 배회성 절지동물은 농업 시스템보다 잡초 관리에 영향을 더 많이 받는 것으로 나타났다.

3.5 GHz 대역에서 동작하는 DLP 배열 안테나의 설계 및 제작 (Design and Fabrication of DLP Array Antenna for 3.5 GHz Band)

  • 윤중한
    • 한국전자통신학회논문지
    • /
    • 제16권6호
    • /
    • pp.1037-1044
    • /
    • 2021
  • 본 논문에서는 3.5 GHz 대역에 적용 가능한 DLP(Dual Linear Polarization) 배열 안테나를 제안하였다. 제안된 안테나는 1×4 배열 안테나로 구성되어 있으며 두 개의 입력포트를 갖도록 설계하였다. 또한 임피던스매칭을 위해 십자가 구조가 패치 아래 부분과 연결하였다. 각 안테나는 18.85 mm(W1)×18.85 mm(L1)의 크기를 갖으며 1×4 배열 안테나 전체 구조는 236.0 mm(W)×60.2 mm(L)의 크기를 갖으며 두께(h) 1.6 mm, 그리고 비유전율이 4.3인 FR-4 기판 위에 설계하였다. 제작 및 측정결과로부터, -10 dB 반사손실을 기준으로 입력포트 1에서 70 MHz (3.54~3.61 GHz), 입력포트 2에서 75 MHz (3.55~3.625 GHz)의 대역폭을 얻었으며 전달계수 S21은 -20dB 이하의 값을 얻었다. 또한 두 입력단자 사이의 교차편파의 값을 얻었다.

WLAN/WiMAX 대역에서 동작하는 두 개의 슬릿 구조를 갖는 CPW 급전방식 소형 안테나 (A Compact CPW-fed Antenna with Two Slit Structure for WLAN/WiMAX Operations)

  • 김우수;윤중한
    • 한국전자통신학회논문지
    • /
    • 제17권5호
    • /
    • pp.759-766
    • /
    • 2022
  • 본 논문에서는 WLAN와 WiMAX 대역에서 동작하는 CPW 급전방식을 갖는 다중대역 소형 안테나를 제안하였다. 제안된 안테나는 모노폴 형태의 변형된 방사체에 두 개의 슬릿 구조를 갖고 유전율 4.4이고 두께 1.0 mm인 FR-4 기판위에 설계하였다. 제안된 안테나의 크기는 15.1 mm⨯16.4 mm이며 전체 기판의 크기는 17.5 mm⨯16.4 mm 이다. 제작 및 측정결과, -10 dB 반사손실 특성을 기준으로 2400 MHz에서는 439 MHz (2.06~2.499 MHz), 3500 MHz 대역에서는 940 MHz (3.31~4.25 GHz) 그리고 5000 MHz 대역에서는 1,315 MHz (5.23~6.545 GHz)대역폭을 얻었다. 또한 제안된 안테나의 측정된 방사패턴은 3D 패턴을 제시하였으며 측정된 이득은 3개 대역에서 최대이득을 각각 2.24 dBi, 2.83 dBi 그리고 2.0 dBi를 얻었다.

GaN/Si 기반 60nm 공정을 이용한 고출력 W대역 전력증폭기 (High Power W-band Power Amplifier using GaN/Si-based 60nm process)

  • 황지혜;김기진;김완식;한재섭;김민기;강봉모;김기철;최증원;박주만
    • 한국인터넷방송통신학회논문지
    • /
    • 제22권4호
    • /
    • pp.67-72
    • /
    • 2022
  • 본 논문에서는 60 nm GaN/Si HEMT 공정을 사용하여 전력증폭기(Power Amplifier)의 설계를 제시하였다. 고주파 설계를 위하여 맞춤형 트랜지스터 모델을 구성하였다. Output stage는 저손실 설계를 위해 마이크로스트립 라인을 사용하여 회로를 구성하였다. 또한 RC 네트워크로 구성된 Bias Feeding Line과 Input bypass 회로의 AC Ground(ACGND) 회로를 각각 적용하여 DC 소스에 연결된 노드의 최소임피던스가 RF회로에 영향을 미치지 않도록 하였다. 이득과 출력을 고려하여 3단의 구조로 설계되었다. 설계된 전력증폭기의 최종 사이즈는 3900 ㎛ × 2300 ㎛ 이다. 중심 주파수에서 설계된 결과는 12 V의 공급 전압에서 15.9 dB의 소 신호 이득, 29.9 dBm의 포화 출력(Psat), 24.2 %의 PAE를 달성하였다.

무선랜용 U-Slot $2{\times}2$ 배열 마이크로스트립 광대역 안테나 설계 (Design of U-Slot $2{\times}2$ array microstrip wideband antenna for wireless LAN)

  • 주성남;김갑기
    • 한국정보통신학회논문지
    • /
    • 제10권2호
    • /
    • pp.374-379
    • /
    • 2006
  • 본 논문에서는 5 GHz 대역 무선랜용 광대역, 고이득 패치 안테나를 설계 제작하였다. 마이크로스트립 안테나의 대역폭을 개선하기 위해서 첫 번째 직사각형 패치에 U-Slot을 삽입하여 마이크로스트립 라인-동축 프로브 급전방식으로 급전시켰으며, 두 번째 안테나를 $2{\times}2$ 배열 형태로 구현하여 이득을 개선하였다. 따라서 결과적으로 본 연구에서는 5 GHz 대역 광대역 U-Slot $2{\times}2$ 배열 패치 안테나를 설계 제작한다. 제작된 안테나는 Anritsu 37169A VNA(Vector Network Analyzer)를 사용하여 측정한 결과 입력 반사손실 VSWR 2:1인 범위가 $5.110 GHz{\sim} 6.142 GHz$까지 약 1 GHz라는 광대역 특성을 나타내었다. 또한 5.15 GHz, 5.35 GHz, 5.50 GHz, 5.85 GHz에 대하여 방사패턴을 측정한 결과 E-평면과 H-평면에서 안테나 이득 13 dBi 이상,3 dB 빔폭 $30^{\circ}$이상이라는 특성을 나타내었다.

흑소의 얼굴을 이용한 개체인식 (Identification of Japanese Black Cattle by the Faces for Precision Livestock Farming)

  • 김현태;지전선랑;서률귀구;이인복
    • Journal of Biosystems Engineering
    • /
    • 제29권4호
    • /
    • pp.341-346
    • /
    • 2004
  • Recent livestock people concern not only increase of production, but also superior quality of animal-breeding environment. So far, the optimization of the breeding and air environment has been focused on the production increase. In the very near future, the optimization will be emphasized on the environment for the animal welfare and health. Especially, cattle farming demands the precision livestock farming and special attention has to be given to the management of feeding, animal health and fertility. The management of individual animal is the first step for precision livestock farming and animal welfare, and recognizing each individual is important for that. Though electronic identification of a cattle such as RFID(Radio Frequency Identification) has many advantages, RFID implementations practically involve several problems such as the reading speed and distance. In that sense, computer vision might be more effective than RFID for the identification of an individual animal. The researches on the identification of cattle via image processing were mostly performed with the cows having black-white patterns of the Holstein. But, the native Korean and Japanese cattle do not have any definite pattern on the body. The purpose of this research is to identify the Japanese black cattle that does not have a body pattern using computer vision technology and neural network algorithm. Twelve heads of Japanese black cattle have been tested to verify the proposed scheme. The values of input parameters were specified and then computed using the face images of cattle. The images of cattle faces were trained using associate neural network algorithm, and the algorithm was verified by the face images that were transformed using brightness, distortion, and noise factors. As a result, there was difference due to transform ratio of the brightness, distortion, and noise. And, the proposed algorithm could identify 100% in the range from -3 to +3 degrees of the brightness, from -2 to +4 degrees of the distortion, and from 0% to 60% of the noise transformed images. It is concluded that our system can not be applied in real time recognition of the moving cows, but can be used for the cattle being at a standstill.

전기철도계통에 순간전압강하 보상장치 적용에 관한 연구 (A Study on the Application of the DVR in AC Electric Traction System)

  • 최준호;김태수;김재철;문승일;남해곤;정일엽;박성우
    • 조명전기설비학회논문지
    • /
    • 제17권6호
    • /
    • pp.95-104
    • /
    • 2003
  • 전기 철도계통은 기존 전력계통과 달리 단상, 대용량 부하로 필연적으로 전압강하, 전압불평형 및 고조파 왜곡 등의 전력품질의 문제가 발생한다. 이러한 문제점 중 상시전압강하는 전력품질의 가중 중요한 요소로서 SVC(Static Var Compensator) 또는 STACOM(Static Compensator)를 설치하여 전압강하를 보상하는 연구가 수행되었다. 또한 순시전압강하는 고속으로 운전중인 철도차량의 제어 및 안전에 상당한 영향을 미칠것으로 예상된다. 따라서 본 논문에서는 AT(Auto Transformer)급전계통에 적용되는 순간전압강하 보상장치에 관한 연구를 수행하였다. 순간전압강하에 의한 철도차량의 과도해석을 위해 전원, 철도급전변압기, AT, 철도선로 및 철도 차량부하를 모델링 하였다. 또한 순간전압강하 발생시 철도차량부하의 과도특성을 분석하였고 이를 보상하기위한 순간전압강하 보상장치 (DVR:Dynamic Voltage Restorer)를 제안하였다. 순간전압강하 보상 시뮬레이션 결과, 순간전압강하 보상장치의 철도급전계통의 적용은 상당히 유용함을 알수있었다.

서식지 교란 및 민간인통제지역 해제에 의한 두루미와 재두루미의 핵심서식지 변화 (The change of core habitats of the cranes due to release of the civilian control zone; CCZ and construction disturbance)

  • 유승화;정화영;김경순;유동수;김남신;김화정;허위행;김진한;이기섭
    • 환경영향평가
    • /
    • 제24권4호
    • /
    • pp.301-316
    • /
    • 2015
  • 멸종위기 야생생물인 두루미와 재두루미는 인간에 의한 교란에 취약한 조류이다. 본 연구는 두루미류의 월동지인 철원의 민간인통제지역 중 일부 해제지역의 서식밀도 변화를 비교하여 그 중요성을 검증하고자 하였다. 또한 공사 및 비닐하우스 건설 등 교란에 의해 두루미류 핵심서식지역 범위에 대한 영향을 평가하였다. 연구결과 민간인통제지역 내에서의 공사 및 개간은 두루미류의 핵심서식지를 위축시키고, 원거리의 핵심서식지 면적을 증대시키는 영향이 있었다. 민간인통제지역의 개방은 2011년 3월에 이루어졌는데, 그 이전 이후의 3년간을 비교할 때 비닐하우스의 건립이 급격히 증가하였다. 민간인통제지역에서 해제된 지역은 비닐하우스의 건설이 집중적으로 증가하였고 개별 비닐하우스의 규모도 증가하였으며 이에따라 두루미의 취식영역이 감소하는 영향이 있었다. 하지만 민간인통제지역에서 해제된 지역임에도 불구하고 두루미의 취식밀도는 감소하지 않았고, 재두루미의 취식밀도는 오히려 증가하였는데, 이는 인근의 잠자리지역에 먹이를 공급했기 때문으로 판단되었다. 향후 민간인통제지역이 추가적으로 해제될 경우 두루미류의 서식밀도가 더욱 낮아질 것으로 예상되었다.

이중 대역 GPS 배열 안테나 설계 (Design of a Dual-Band GPS Array Antenna)

  • 김희영;변강일;손석보;추호성
    • 한국전자파학회논문지
    • /
    • 제24권7호
    • /
    • pp.678-685
    • /
    • 2013
  • 본 논문에서는 하이브리드 급전 구조를 가지는 이중 대역 GPS 패치 안테나를 설계하였다. 설계된 개별 안테나는 GPS 배열 안테나로 사용되며, 배열에서 개별 안테나의 방향을 조절하여 패턴 왜곡 및 간섭을 최소화하였다. 제안된 안테나는 GPS $L_1$(1.5754 GHz), $L_2$(1.2276 GHz) 대역에서 각각 공진하는 2개의 방사 패치를 가지고 있으며, 광대역 및 원형 편파 특성을 구현하기 위해 칩 커플러를 이용한 2-포트 급전 방법을 사용하였다. 설계된 개별 안테나를 각각의 장착 위치에서 네 방향(${\phi}=0^{\circ}$, ${\phi}=90^{\circ}$, ${\phi}=180^{\circ}$, ${\phi}=270^{\circ}$)으로 돌려가며 중앙 안테나와 가장 적은 패턴 왜곡과 간섭을 가지는 방향으로 안테나를 장착하였다. 배열 안테나 측정 결과, 중앙 안테나의 전면 방향 이득은 $L_1$$L_2$ 대역에서 0.3 dBic, -1.0 dBic, 측면 안테나의 전면 방향 이득은 $L_1$$L_2$ 대역에서 1.6 dBic, 1.0 dBic를 가지며, 이를 통해 제안된 배열 안테나가 이중 대역 GPS 배열 안테나로 사용 가능함을 확인하였다.