• 제목/요약/키워드: Feeding ground

검색결과 230건 처리시간 0.023초

콤바인의 자동제어(自動制御)에 관한 연구(硏究)(III) -자탈형(自脱型) 콤바인의 탈곡(脱穀)깊이 자동제어(自動制御)- (Automatic Control of the Combine(III) -Automatic Feeding Depth Control of the Head-feed Combine-)

  • 정창주;김상천;남광희
    • Journal of Biosystems Engineering
    • /
    • 제14권2호
    • /
    • pp.94-103
    • /
    • 1989
  • This study was intended to develop the automatic feeding depth control system of the head-feed combine which could feed the rice head into threshing unit at the optimal depth regardless of plant height and uneven ground surface. In the control system, one-board microcomputer was used for the controller instead of conventional electric circuits. Field test of the combine equipped with the control system was conducted to evaluate its overall performance. It was also investigated how the location and time delay of rice head sensor affect the system performance.

  • PDF

PWM 인버어터로 구동되는 유도 전동기의 고주파 누설전류 모델링 및 억제에 관한 연구 (A Study on Modeling and Damping of High-Frequency Leakage Currents in PWM Inverter Feeding an Induction Motor)

  • 이재호;전진휘;홍정표;강필순;박성준;김철우
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1998년도 연구회 합동 학술발표회 논문집
    • /
    • pp.18-22
    • /
    • 1998
  • A PWM inverter with an induction motor often has a problem with a high frequency leakage current that flows through stray capacitor between stator windings and a motor frame to ground. This paper presents an equivalent circuit for high frequency leakage currents in PWM inverter feeding an induction motor, which forms an LCR series resonant circuit. A conventional common mode ckoke or reactor in series between the ac terminals of a PWM inverter and those of an ac motor is not effective to reduce the rms and average values of the leakage current, but effective to reduce the peak value. Furthermore, this paper proposes a leakage current damper which is different in damping principle from the conventional common mode choke. It is shown theoretically and experimentally that the leakage current damper is able to reduce the rms value of the leakage current to 25%, where the core used in the leakage current damper is smaller than that of the conventional common-mode choke

  • PDF

개구 결합 구조를 갖는 PCS 기지국용 마이크로스트립 정형 빔 배열 안테나 (An Aperture-coupled Microstrip Shaped-beam Array antenna for the PCS Basestation.)

  • 여운식;김광조;강승택;김형동
    • 한국전자파학회논문지
    • /
    • 제8권6호
    • /
    • pp.363-644
    • /
    • 1997
  • 본 논문에서는 그라운드변 상의 개구를 통해 마이크로스트립 패치로 결합을 일으키는 구조를 갖는 PCS 기지 국용 정형 빔 배열 안테나 설계와 제작에 관하여 다룬다. 최적의 정형 빔 패턴은 안테나 합성법으로 얻어졌다. 배 열된 패치들 사이에서의 결합을 고려한 배열 안테나와 급전회로는 CAD tool을 이용하여 설계되었다. 급전 회로 는 최적의 정형 빔 패턴을 얻기 위해서 Wilkinson 전력 분배기를 이용하여 설계되었다. 설계 결과와 측정 결과가 비교되어진다.

  • PDF

개구 결합 급전 구조를 갖는 이중 선형편파 패치 안테나의 설계 및 제작 (Design and Fabrication of Dual Linear Polarization Patch Antenna with Aperture Coupled Feeding Structure)

  • 윤중한
    • 한국전자통신학회논문지
    • /
    • 제18권6호
    • /
    • pp.1015-1022
    • /
    • 2023
  • 본 논문에서는 4.7 GHz 특화망 대역에 적용할 수 있는 개구결합 급전을 갖는 이중 선형편파 안테나를 제안하였다. 제안된 안테나는 격리도 향상을 위해 일반적인 개구 결합급전을 갖고 상층과 하층에 각각 급전점을 갖도록 설계하였다. 각각의 기판의 크기는 34.0 mm×34.0 mm (W×L)이며 두께(h) 1.0 mm, 그리고 비유전율이 4.4인 FR-4 기판을 사용하였다. 또한 상층의 윗면에 12.7 mm×14.6 mm (W2×L3)의 패치를, 하층의 아랫면에 24.0mm×1.6 mm의 급전선로를, 접지면에 1.0 mm×7.7 mm(S×T)의 크기를 갖는 슬롯을 설계하여 패치로 급전되도록 하였다. 제작 및 측정 결과로부터, -10 dB 반사손실을 기준으로 배열 안테나의 경우, 입력포트 1에서 300.0 MHz (4.52~4.82 GHz), 입력포트 2에서 170.0 MHz (4.65~4.82 GHz)의 대역폭을 얻었으며 전달계수 S21은 -30 dB 이하의 값을 얻었다. 또한 각 급전포트에서의 편파분리도를 얻었다.

Effects of Dietary Starch and Sucrose on Tissue Responsiveness and Sensitivity to Insulin in Goats Fed a High-concentrate Diet

  • Fujita, Tadahisa;Kajita, Masahiro;Sano, Hiroaki
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제20권3호
    • /
    • pp.385-392
    • /
    • 2007
  • A glucose clamp technique was used to compare dietary starch (ST), starch plus sucrose (ST+SU) and sucrose (SU) with regard to the effect on tissue responsiveness and sensitivity to insulin in intact adult male goats. The goats were fed diets containing 1.2 times of ME and CP for maintenance requirements twice daily for 21 d. Of the energy intake, 30% was offered with ST, ST+SU or SU for the respective diets, and 70% as alfalfa hay, ground corn and ground soybean meal at the respective weight ratio of 1, 1, and 0.3 for all diets. Tissue responsiveness and sensitivity to insulin were evaluated using a hyperinsulinemic euglycemic clamp technique with four levels of insulin infusion beyond 13 h after feeding. The concentrations of plasma metabolites and insulin were also determined at 3, 6 and 13 h after feeding to evaluate the effects of different carbohydrates on metabolic states in the body. Plasma glucose concentration was higher (p = 0.01) for SU diet than for ST and ST+SU diets. Increasing SU intake decreased (p<0.01) plasma acetate concentration across the time. At 3 h but not 6 and 13 h after feeding, high lactate (p = 0.01), and non-significant high propionate (p = 0.14) and low urea nitrogen (p = 0.19) concentrations were observed in plasma on SU compared with ST and ST+SU diets. Plasma insulin concentration was not different (p = 0.44) between ST and SU fed animals. In the glucose clamp experiment, considering the effects on the maximal glucose infusion rate (tissue responsiveness to insulin, p = 0.54) and the plasma insulin concentration at half-maximal glucose infusion rate (insulin sensitivity, p = 0.54), SU was not different from ST. It is concluded that SU may not be greatly different from ST with regard to the effect on tissue responsiveness and sensitivity to insulin in adult goats when fed twice daily as part of a high-concentrate diet. The possible greater effects of SU on plasma metabolites concentrations at 3 h than at 6 and 13 h after feeding suggest that a lack of persistency of SU effects during the postfeeding period may be associated with the poor response to SU in insulin action.

UHF대역 지상국용 무지향 고이득 안테나 (An Omnidirectional High Gain Antenna for UHF Band Ground Station)

  • 배기형;장민수;주재우;황찬호;홍기표
    • 한국지식정보기술학회논문지
    • /
    • 제12권4호
    • /
    • pp.539-550
    • /
    • 2017
  • 본 논문에서는 UHF대역 원통형 다이폴 배열 안테나에 대해서 설계, 제작 및 시험을 하였다. 제안하는 안테나는 원통형 다이폴을 수직으로 4단 배열하였다. 원통형 다이폴 내부에는 병렬구조 급전회로를 설치하여 광대역 매칭이 되도록 구현하였다. 급전회로를 원통형 다이폴 중심에 설치하여 방위각 방향 무지향 방사패턴의 이득평탄도 특성을 최적화하였다. 급전회로에서 분기되는 신호의 차이를 최소화하여 대칭적인 방사패턴을 구현하였다. 요구 규격은 UHF대역에서 대역폭 11.2% 이상, 이득 6dBi 이상, 2:1 이하의 정재파비, 수평방향 방사패턴 이득평탄도 ${\pm}1dB$ 이내, 고각 방향 방사패턴 3dB 빔폭 13도 이상이다. M&S를 통해서 구현 가능성을 확인하고, 제작 및 시험을 통해서 M&S 결과를 검증하였다. 시험결과는 UHF대역에서 대역폭 11.2%, 이득 6.30~8.31dBi, 정재파비 1.53:1 이하, 방위각 방향 방사패턴 이득평탄도 ${\pm}0.2dB$ 이내, 고각 방향 방사패턴 3dB 빔폭은 15.62~15.84도이다. 시험결과 모든 규격을 충족하였다.

무선 Biotelemetry용 인체 이식형 안테나 (A Scalp-Implantable Antenna for Wireless Biotelemetry)

  • 유형석
    • 전기학회논문지
    • /
    • 제65권1호
    • /
    • pp.112-115
    • /
    • 2016
  • This paper demonstrates a scalp-implantable miniaturized antenna at the medical implant communication service (MICS) (402-405MHz) band. The antenna size is only $27.63mm^3$($8.5mm{\times}6.5mm{\times}0.5mm$), which is the smallest antenna for the MICS band. Miniaturization is achieved by using a symmetrical serpentine shaped radiating patch and placing open-end slots in the ground plane. In addition, co-axial feeding is used for excitation with a shorting pin connected between the radiator and ground. The antenna was simulated in a homogeneous skin model and in the human scalp. An experimental prototype of the proposed antenna was fabricated and measured in a skin-mimicking gel. Good agreement was obtained between the measurement and simulation results, showing a broad bandwidth of 49 MHz (from 395 to 444 MHz) for |S11| less than -10 dB and a maximum gain of -42.87 dBi. This gain is higher than the previous MICS antenna with respect to antenna size.

Modeling of the Axial Movement of Parts During Centerless Through-Feed Grinding

  • Kim, Kang
    • Journal of Mechanical Science and Technology
    • /
    • 제17권7호
    • /
    • pp.1044-1053
    • /
    • 2003
  • There are two major differences between the centerless infeed grinding process and the centerless through-feed grinding process. One is an axial movement of workpieces, and the other is that several workpieces are ground simultaneously and continuously by through-feeding. Because of these differences, through-feed ground parts inherently possess not only the roundness error but also the tapering error. The aims of the research reported in this paper are to examine this inherent tapering characteristic and to find the effects of grinding variables (center height angle, regulating wheel tilt angle, and shape of grinding wheel surface). To accomplish the objectives, experiments were carried out using two types of cylindrical workpiece shapes. Also, computer simulations were performed using the 3-D through-feed grinding model.

Marbling and Its Nutritional Impact on Risk Factors for Cardiovascular Disease

  • Smith, Stephen B.
    • 한국축산식품학회지
    • /
    • 제36권4호
    • /
    • pp.435-444
    • /
    • 2016
  • This review addresses the role of fat in beef palatability and healthfulness. Particular emphasis is placed on the content of oleic acid in beef, and how this increases with time when cattle are fed a grain-based diet. Oleic acid decreases the melting point of lipids from beef, increasing the perception of juiciness and improving beef flavor. Clinical trials have demonstrated that ground beef containing elevated oleic acid increases, or at the least has no negative effects on the concentration of HDL cholesterol. The amount of fat in published ground beef intervention trials greatly exceeds the amount of fat in equivalent portions of beef from U.S. domestic or Korean Hanwoo cattle. Thus, we conclude 1) Beef cattle should be raised under production conditions that increase the concentration of oleic acid in their edible tissues (i.e., by grain feeding over extended periods of time); and 2) The amount of fat consumed in a typical portion of beef will not increase risk factors for cardiovascular disease.

유기재배와 관행재배 사과원 내 지표 배회성 절지동물 군집에 대한 잡초 관리의 영향 (Influence of Weed Management Practices on Ground-dwelling Arthropod Assemblages in Organic and Conventional Apple Orchards)

  • 김지원;정철의
    • 한국응용곤충학회지
    • /
    • 제60권1호
    • /
    • pp.105-114
    • /
    • 2021
  • 초식, 포식, 분해 등 생태학적 서비스를 제공하는 지표 배회성 절지동물은 사과원의 중요한 구성 요소이며, 이들의 군집에 영향을 미치는 잡초는 유기재배와 관행재배 사과원에서 다르게 관리된다. 잡초 관리와 관련된 과수원 관리가 지표 배회성 절지동물의 풍부도와 다양도에 미치는 영향을 평가하기 위해 3년간 연구를 수행하였다. 대부분의 절지동물은 상위분류군과 섭식 기능군으로 분류하였으며, 딱정벌레류는 종 수준으로 분류하였다. 지표 배회성 절지동물의 주요 우점군은 딱정벌레목으로 나타났다. 초식자와 포식자의 풍부도는 유기재배 사과원에서 높은 결과를 보였으며, 딱정벌레류의 풍부도와 다양도 또한 관행재배 과원보다 유기재배 사과원에서 높은 결과를 보였다. 거미목, 딱정벌레목 또는 딱정벌레류의 풍부도는 잡초 관리 빈도와 음의 상관관계를 보였다. 지표 배회성 절지동물은 농업 시스템보다 잡초 관리에 영향을 더 많이 받는 것으로 나타났다.