• Title/Summary/Keyword: Feeding Part

Search Result 367, Processing Time 0.027 seconds

Ecological Notes on Narcissus Flycatcher, Musciapa narcissina zanthopygia HAY - With special reference to the breeding process and feeding habits of nestlings during their nesting period- (흰눈섭황금새(Muscica narcissina zanthopygia HAY)의 생태-특히 번식경과와 육령기의 식습성)

  • WON, Pyong-Oh;RHEE, Kyung-Jho
    • The Korean Journal of Zoology
    • /
    • v.8 no.2
    • /
    • pp.89-127
    • /
    • 1965
  • 1. This report is on the outcome of observation made up the breeding process of Narcissus flycatcher, Muscicapa narcissina zanthopygia, using 15 ness-boxes at Seoul and Kwang Nung Experimental forest in 1964, and the relevant feeding habit was studied by the collar method of wrapping the necks of thenestlings for 50-60 minutes or more in some cases from 1963 to 1964. 2. The Narcissus flycatcheris a common summer resident throughout Korea arriving at the end of April. The earliest data of arrival of this species in Seoul, is April 26, 1964. They migrate southward from the later part of September to early part of October. 3. In a week after their arrival , they start to build nest after a brief courtship. Male and female prepare their nest ina nestboxes in 4 or 5 days. Nests are usually found in the moss, which provide definite frame-work. The inner side of the nest is usually composed of roots of Gramineae or leaves of pine, oak or other broad leave tree. 4. The laying period is generally from the later part of April to the middle of June : and the number of eggs laid is from 3 to 8 , therefore 5 in average : eggs are pink with traces of milky yellow blending of light auburn and orange red spots and chicken-egg-like in shape. 5.The incubation takes place for 7-12 days from the middle part of May to the middle of June, in the order of male and female . The hatching rate tends to increase in proportion to clutch size. 6. The feeding period usually lasts 15 days in average from the early part of June to the middle of July and the feeding urge tends to increase in proportion to brood size. 7. The animals invading into their nest-boxes are red ants, chipmunks, bees , barkbeetles and philippine red-tailed shirkes, etc. 8. On the basis of analysis covering 714 birds in 31 nests, the food they consumed during the nesting period of nestlings were mostly of animal matters composing of : insect larvae form-39. 88% insect adult form 36.26%, insect pupae-0.19%, spider-17.75% and other animal matters 5.92% , Besides a small amount of plant pieces were found . As to the insect larvae, Lepidoptera was the largest in the content followed by Hymenoptera , Orthoptera and Coleoptera. As to the insect adult, Diptera was the largest in the content followed by Coleoptera, and Hymenoptera. In view of forest protection, noxious insect was of 69.38%, useful insect 4.39%, and spider 17.75%. 9. The rich assortment of its food, the ability of acquiring various insect (adults as well as larvae), its destruction of great numbers of harmful insects , and its quick assimilation artificial nesting with the nest-boxes of 2.5-3cm entrance hole employed, allow us to conclude that the flycatcher may be successfully employed in the elimination of fores pests. The above results are only that part obtained near Seoul in the middle of Korea, however, if we would extend the scheme to other broad areas using similar techniques, the nest-boxes could not only be well used by the birds, but also it would help to prevent the increase of harmful. insects.

  • PDF

An expert system approach to the type selection of part feeders (부품공급장치 선정을 위한 전문가 시스템)

  • 조덕영;조형석
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1989.10a
    • /
    • pp.296-301
    • /
    • 1989
  • As a cornerstone of assembly automation, the automatic part feeders are used to feed the various kind of the parts to the assembly workstation in the desired order and fashion. In this paper, EXPERT SYSTEM consisting of the data base for the feeding functions and part properties plus the rule base for the selection of feeder types is developed. The symbolic data of the part properties are used as basic factors in the selection rule of the suitable feeder types.

  • PDF

A Food and Nutrient Intake Study of the Villagers in Four Communal Feeding Villages in Korea (농번기(農繁期) 공동취사장(共同炊事場)의 영양조사)

  • Paik, Jeong-Ja;Kim, Ha-Rriet
    • Journal of Nutrition and Health
    • /
    • v.10 no.3
    • /
    • pp.48-55
    • /
    • 1977
  • A communal feeding program has been managed mostly by the Sae Ma Eul Women's club of agricultural cooperatives during busy days of farming in rural Korea and spreading rapidly throughout the country since a couple of years ago. Four communal feeding villages from 3 provinces in Korea were purposively selected. The food and nutrient intake of 524 participants were measured by the Precise-Weighing method for 3 days from October $7{\sim}16$ 1976. Total amount of food consumed per participant per two meal day was 1456 grams, greater than national average. Two meals that the communal feeding program provided to farmers under the intensive work of harvesting were supplying enough calories and all other nutrients except the riboflavin. There was a variation among CF villages but overall the nutrient intake was good and had balanced meals. This investigation is a part of the study on nutrition supported by a grant from USAID.

  • PDF

A Study on Optimal Design of Polymer Extruder Dies by CFD (CFD를 이용한 고분자 압출기 Dies 최적설계에 관한 연구)

  • Kim, Jea-Yoel;Choi, Jin-Ho
    • Journal of the Korean Society of Manufacturing Technology Engineers
    • /
    • v.18 no.6
    • /
    • pp.585-589
    • /
    • 2009
  • Extruder is divided to greatly three part at extrusion process. First, by hopper(Hopper) second, barrel(Barrel) with Screw that is point of extruder and third that is raw material supply wealth extrusion into dies(DIES) Part that decide shape of do product greatly divide. Hopper is role that distribute in raw material supply wealth (Feeding zone) of Screw preserving raw material in state of high quality how at extrusion process, and make distributed raw material as Screw in barrel rotates and 3 stage and inflicting heat and pressure raw material melting(Melting) state. And raw material of melting state Screw's measuring stoker(Metering zone) whereabouts anaphora do and product is completed through pipe channel of dies. Dies that is the most important as Screw in extrusion is part that is last part of melting state process of raw material and causes huge effect in quality of product. If more than design of dies happens, manufacture itself of dies is hard, but there are a lot of amount of losses accordingly. In this research, make pipe channel that raw material of melting state flows in dies can present dies basic design method through flow analysis of ideal pipe channel using CFdesign.

  • PDF

The Effects of Antenatal Breast Care on Breast Feeding practice (임신중 유방간호가 산모의 모유수유 실천에 미치는 영향)

  • 박옥희
    • Journal of Korean Academy of Nursing
    • /
    • v.22 no.1
    • /
    • pp.29-41
    • /
    • 1992
  • The purpose of this research was to study the effects of antenatal breast care on decreases in breast discomfort and increases in the breast feeding rate during the postpartum period. A nonequivalent control group posttest research design was used. The experimental group consisted of fifty -one pregnant women(primigravida) who were receiving antenatal care in the OBGYN clinics of four hospitals between March 5 and May 30, 1991. The control group was made up of seventy - five postpartum women who delivered at two hospitals OBGYN clinic and one midwife clinic between May 4 and June 15, and between September 5 and October 15, 1991. Data were collected via telephone interviews on the seventh postpartum day and at the end of the second month. Data analysis methods used frequencies and the x$^2$- test. The results were as follows : 1. The rate of breast feeding practice at two months was higher in the experimental group(70.6%) than in the control group(25.3%) (p<.01). 2. Nipple soreness in the early breast feeding period was lower in the experimental group(14.6%) than in the control group(25.3)(p<.01). 3. Severe breast discomfort in the early breast feeding period was lower in the experimental group (12.5%) than in the control group(39.2%)(P<.01). 4. There was a significant relationship between the breast feeding practice and the planned feeding method(p<.05), and between breast feeding practice and nipple soreness(p<.01) in the experimental group, and the presence of a job(p<.01), the sex of the infant(p<.05), and the first feeding time(p<.05) in the control group. 5. The reasons for unsuccessful breast feeding were a deficiency of breast milk (66.7% in the experimental group, 30.4% in the control group), poor sucking on the part of the baby(13.3% in the experimental group, 21.4% in the control group).

  • PDF

Evaluation of Diagnosis-based Control Strategy for NH4-N and NOX-N Removal of a Full-scale Wastewater Treatment Process (하수처리시설의 질산화 진단기반 제어 방법의 개발 및 실규모 플랜트 적용을 통한 평가)

  • Kim, Yejin;Kim, Hyosoo
    • Journal of Environmental Science International
    • /
    • v.27 no.6
    • /
    • pp.447-456
    • /
    • 2018
  • In this research, the target process was a modified type of a conventional aeration tank with four different influent feeding points and alternated aeration to obtain nitrogen removal. For more accurate switching of influent feeding, the process was operated under a designed control strategy based on monitoring of $NH_4-N$ and $NO_X-N$ concentrations in the tank. However, the strategy did have some limitations. For example, it was not sensitive to detecting the end of each reaction when losing the balance between nitrification and denitrification of each opposite part of biological tank. To overcome the limitations of the existing control strategy, a diagnosis-based control strategy was suggested in this research using the diagnosis results classified as normal (N), ammonia accumulation (AA) and nitrate accumulation (NA). Using the pre-designed rules for control actions, the aeration and volume of the aerated part of the reactor could be increased or decreased at a fixed mode time. In simulations of the suggested diagnosis-based control strategy, the $NH_4-N$ and $NO_X-N$ removal rates in the reactor were maintained at higher levels than those of the existing control strategy.

Musaic Disease of Black Locust (Robina pseudo-acacia L.) (Part 3) Insect Vectors (아까시아나무 모자익병에 관한 연구 (제 3 ))

  • 김종진
    • Korean Journal of Microbiology
    • /
    • v.4 no.2
    • /
    • pp.19-21
    • /
    • 1966
  • For the purpose of determining possibility of aphid-transmission of mosaic disease of black locust, cowpea aphid (Aphis medicagnis Koch) and green peach aphid (Myzus persicae Sulzer) were experimented using cowpea as test plant, and both proved to be the vectors. As for transmission threshold period of cowpea aphid to the virus, the acquisition feeding period was five seconds and inoculation feeding period was two minutes. This black locust mosaic virus, therefore, is a nonpersistent virus.

  • PDF

Forming Limit Diagram Measurement of Tube for Tube Hydroforming Process (하이드로 포밍용 튜브의 성형 한계선도 측정)

  • Han, S.S.
    • Transactions of Materials Processing
    • /
    • v.15 no.6 s.87
    • /
    • pp.467-472
    • /
    • 2006
  • The forming limit diagram of tube is required for the part design and the formability analysis of tube hydroforming. The finite element analyses of simple bulge test were done to obtain the various strain combinations on FLC. The finite element analysis results were shown that the bursting at various strain combinations could be induced by simple bulge test. The experiment oi tube bulge test was carried out according to the test condition that obtained from finite element analysis and the left hand side of forming limit diagram was built.

COMPUTATIONAL FLOW ANALYSIS ACCORDING TO ORIFICE POSITION IN FEEDING LINE OF LRE (액체로켓엔진 공급배관 내 오리피스 위치에 따른 유동해석)

  • Kim, H.M.;Kim, W.J.;Roh, T.S.
    • 한국전산유체공학회:학술대회논문집
    • /
    • 2010.05a
    • /
    • pp.451-455
    • /
    • 2010
  • In this study, the various supply system of LRE such as a feed-line, an elbow, and an orifice as a part of integrated analyzing has been combined to develop the performance analysis program. Computational analysis has been used to compare the results and to verify the validity and limitation conditions of the performance analysis program by changing orifice positions.

  • PDF

The Dynamic and Machining Characteristics of Co-axial Grinding Machining System (동축 가공 연삭시스템의 운동 및 가공 특성)

  • Kim G.H.;Lee S.W.;Choi H.Z.;Choi Y.J.
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2005.10a
    • /
    • pp.608-611
    • /
    • 2005
  • As the optical communication industry is developed, the demand of optical communication part is increasing. $ZrO_2$ ceramic ferrule is very important part which can determines the transmission efficiency and information quality to connect the optical fibers. In general $ZrO_2$ ceramic ferrule is manufactured by grinding process because the demands precision is very high. For the precision grinding machining, it is very important that the error of feeding system is improved. Therefore, we estimated the dynamic characteristics in feeding system of ultra precision co-axial grinding machining system. Then, we performed the machining characteristics experiment.

  • PDF