• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1163_1164
• /
• 2009

AC AT feeding method consists return circuits of electric train inserting in parallel between trolly line and feeding line and connecting neutral line to rail and FPW. Due to increasing train number, electric load at feeding system are increasing and collecting voltage of train are going down. To increase electric load and collecting voltage between trolly line and rail, the usefulness of new autotransformer are considered which variation of short impedance and change of line voltage is simulated with modified winding ratio of autotransformer from 1:1 to variable tab.

• Journal of Welding and Joining
• /
• v.19 no.6
• /
• pp.600-607
• /
• 2001

A CCD camera with a laser stripe was applied to realize the automatic weld seam tracking in GMAW. It takes relatively long time to process image on-line control using the basic Hough transformation, but it has a tendency of robustness over the noises such as spatter and arc light. For this reason. it was complemented with adaptive Hough transformation to have an on-line processing ability for scanning specific weld points. The adaptive Hough transformation was used to extract laser stripes and to obtain specific weld points. The 3-dimensional information obtained from the vision system made it possible to generate the weld torch path and to obtain the information such as width and depth of weld line. We controled the wire feeding rate using informations of weld line.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.2 no.2
• /
• pp.161-172
• /
• 1969

Ten experimental tuna long line fishing operations were performed with the long lines A and B, in combination casting orders of BA and AB. The long line B differs from A in its additional main line length per basket and its greater depth of submersion (Table 1). The BA casting order results in an AB hauling order, so that the long line B is casted at an earlier time of a day and fishes for a longer period than A line (fig. 2). The number of fish caught was divided into subclasses in order to be subjected to $x^2-tests$ (Table 2). The first series of $x^2-tests$ were calculated using the hooking rates of two subclasses with other factors pooled (Table 3). The second series of $x^2-tests$ were calculated to obtain the interactions between two subclasses when other factors differed (Table 4). Attention was paid to the extremely small interactions as well as to the large interactions in order to find out whether a factor functions in the same way or in a contradictory way when the other factors involved differ. The test result is summarized in Table 5. The relationship between the hook casting time (relative to the sunrise time) and the hooking rates reveals the feeding behavior of particular species (fig. 3) A high hooking rate for yellowfin tuna shown in the period from one hour before sunrise to the moment of sunrise suggests that they feed actively in that period. Their poor hooking rate on earlier casted hooks suggests that they do not feed well under conditions of darkness and that they feed best while the hooks are sinking. Furthermore it is likely that yellowfin tuna maintain a shallow depth in the daytime, for the $x^2$ interaction between the line casting order BA and AB shows their persistant preferance of the long line A regardless of line casting order. Bigeye tuna show their feeding behavior under conditions of darkness, and show a preference for the sea's deeper layer. Alepisaurus borealis (Gill) show their feeding behavior under conditions of darkness more significantly than the bigeye tuna and their preferance for deep layers is also more significant. Marlins (mainly Makaria mazara) show a feeding behavior which is similar to the yellowfin tuna. The author emphasizes that certain variations of the hooking rates in relation to the line easting time were caused by an inadequate fishing depth as well as by the fish preference for a particular feeding time. When the part of the line casted in pre-dawn hours and hauled in the pre-sunset hours show a significantly lower hooking rate than other parts of the line, then it is concluded that tile hooks settled in a sea layer too deep for feeding.

• Journal of Welding and Joining
• /
• v.15 no.1
• /
• pp.116-124
• /
• 1997

A scope of this study is to establish the optimum plasma spray conditions for fine ($5\mu\textrm{m}$) $Al_2O_3$ powder. However, the flowability of the $Al_2O_3$ powder is not so good because of irregular particle shape and fine particle size. Therefore, powder feeding system was modified by 1) change of powder feeding line material from polymer to copper 2) shorten the powder feeding tube length 3) heating the powder feeding system to $80^{\circ}C$4) vibrating the powder feeding line continuously, in order to feed the fine powder homogeneously. The homogeneous powder feeding conditions were obtained with the modified powder feeding system by controlling the powder carrier gas flow and the powder flow rate indicator. The best plasma spraying conditions for the fine $Al_2O_3$ powder were found out as 40kw gun power, 80 g/min. powder feed rate and 50 mm working distance after characterizing the microstructure, hardness and wear loss of the $Al_2O_3$ coating layer.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.179-185
• /
• 2005

It is an essential subject to decrease the mass of a launch vehicle for improving performance and efficiency of space launch system. Particularly, reducing the engine supporting area is necessary for high efficiency of propulsion system with clustered engine systems. The engine supporting area is related to the branch location of the oxidizer feeding line. This article deals the performance variation of the propulsion system such as the mass of the oxidizer feeding line, pressurization pressure of the oxidizer tank, and the onset of nucleation boiling in the oxidizer pipe with the branch location of the main feeding line.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1984-1990
• /
• 2011

This paper presents the simulation of traction power supply system for the evaluation of voltage drop in Kyungbu high speed line. This simulation is performed in circumstance of extended feeding through vicinity substation. Extended feeding should be considered from design of system. Therefore, voltage drop at extended feeding must be accepted against regulation. In this paper, voltage drop is evaluated under condition of extended feeding targeting section from Shinchungju and Pyungtaek S/S.

• Fisheries and Aquatic Sciences
• /
• v.17 no.2
• /
• pp.229-247
• /
• 2014

Seven feeding trials were conducted to determine the effects of feeding rate and frequency in the Korean rockfish Sebastes schlegeli at seven different water temperatures. Two feeding-rate experiments for 5-g Korean rockfish at $17^{\circ}C$ and $20^{\circ}C$; three feeding rate experiments for 16-g Korean rockfish at $16^{\circ}C$ and $24^{\circ}C$; and finally, two feeding frequency experiments for 93- and 100-g at $15^{\circ}C$ and $20^{\circ}C$ were conducted. Twenty fish averaging $5.5{\pm}0.2$ g ($mean{\pm}SD$) were randomly distributed into 18 indoor tanks containing 40-L seawater from a semi-recirculation system. Fish were fed a commercial diet for 4 weeks at water temperatures of $17^{\circ}C$ and $20^{\circ}C$. Two feeding trials were conducted to determine the optimum feeding frequency in growing Korean rockfish reared at temperatures of $15^{\circ}C$ and $19^{\circ}C$. Broken line regression analysis of weight gain (WG) indicated that the optimum feeding rates of 5-g growing Korean rockfish were 4.48% (BW/day; BW, body weight) at $17^{\circ}C$ and 4.83% (BW/day) at $20^{\circ}C$. Broken line regression analysis of WG showed optimum feeding rates of 16-g juvenile Korean rockfish of 3.41% (BW/day) at $16^{\circ}C$, 3.75% (BW/day) at $20^{\circ}C$, and 3.34% (BW/day) at $24^{\circ}C$. The biological performance, results, along with morphological indices and serological characteristics, suggest that a feeding frequency of 1 meal/day was optimal to improve WG in growing Korean rockfish grown from 93 to 133 g at a water temperature of $15^{\circ}C$, and 100 to 132 g at $19^{\circ}C$.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.451-455
• /
• 2010

In this study, the various supply system of LRE such as a feed-line, an elbow, and an orifice as a part of integrated analyzing has been combined to develop the performance analysis program. Computational analysis has been used to compare the results and to verify the validity and limitation conditions of the performance analysis program by changing orifice positions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.114-120
• /
• 2008

This paper proposed the band pass filter(BPF) with feeding structure using $\pi$-type transmission line by means of transforming the input/output coupled-lines of the half wavelength parallel coupled-line BPF into K-inverter, then substituting $\pi$-type transmission line equivalence for K-inverter. The proposed method supplies solution with what the half wavelength parallel coupled-line BPF's input/output coupled-lines are realized. Also it can quite reduce efforts and time needed to optimize filter performance when is compared to reported method using tapped line structure because formulas is very simple and accurate. On the basic of the proposed method, the BPF with feeding structure using $\pi$-type transmission line has been designed and fabricated. The validity of proposed method was proven by the measured result.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.279-282
• /
• 2006

Upon a turbopump's running, cavitation may occur at the inlet of the LOx pump by pressure drop and heat transfer along the LOx feeding line. Since the cavitation can cause serious damage to the pump or to stop running, the absence of the cavitation at the inlet of a turbopump should be confirmed before the using the turbopump. In the present study, the calculation of the volume fraction of LOx gas phase at the inlet of the pump are performed with different temperatures of LOx in the tank, pressure drops and heat transfers along the feeding line. This calculation method can be applied to define the limits of thermal and hydraulic characteristics during the design of a LOx feeding system.