• 대한전기학회논문지
• /
• 제39권1호
• /
• pp.36-48
• /
• 1990

브러쉬없는 직류전동기의 위치제어시 새로운 제어방법을 제시하였다. 일반적으로 브러쉬없는 직류전동기의 모델식은 비선형특성을 갖는다. 이 비선형특성을 벡터제어에 근거한 filed orientation방법으로 선형화시켰고, 선형화된 시스템에 새로운 상태변수를 첨가한 상태변수 궤환(augmented state variable feedback)방법이 적용될 수 있음을 보였다. 또한 부하외란을 미지의 입력으로 본 0-관측기(0-observer)로 부터 관측하고 여기서 얻은값을 이용하여 응답이 빠른 feedforward로 보상하였다. 이로써 전체시스템의 응답특성을 변화시키지 않고도 외란에 안정한(robust)특성이 얻어짐을 보였다. 전체 시스템은 마이크로 프로세어 MC68000을 이용한 디지탈 제어기로 구현하였고, 각 제어 알고리즘에 대한 시뮬레이션 및 실험결과로 제안된 제어알고리즘의 효과를 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.368-371
• /
• 1996

In this paper, a feedforward-plus-feedback control scheme is presented to prevent congestion in store-and-forward packet switching networks. The control scheme consists of two algorithms. Specifically, the input traffic adjustment algorithm employs a fairness policy such that the transmission rate of the input traffic is proportional to its offered rate. The control signal computation algorithms to ensure stability of the overall system in the robust sense and to ensure the desired transient behavior in the adaptive, with respect to variations of input traffic, are designed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.382-385
• /
• 2003

In this paper, in order to improve the control performance of piezoelectric actuator, an integrated control structure is proposed. The control structure consists of inverse hysteresis model , to compensate the hysteresis nonlinearty problem, and feedforward - feedback controller to give a good tracking performance. The inverse hysteresis model and neural network are used as feed-forward controller, and PID controller is used as a feedback controller. From diverse experiments it is concluded that the proposed control scheme gives good tracking performance than the classical control does.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1398-1403
• /
• 2003

In this paper, a simple method to design an MIMO sound field control system was proposed. The control system was designed to achieve 1) noise attenuation and 2) sound equalization by utilizing feedback and feedforward controllers. The method was based on partial model matching on frequency domain which only required measured frequency response data, or impulse response data in order to tune parameters of the controller. The proposed method was applied to a normal office room and results of experiment showed effectiveness of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.105-108
• /
• 1993

This paper is concerned with a two-degree-offreedom control system design for a flexible arm, a two-degree-of-frecdom control system can achieve a robust stability specification and a control performance specification independently. By this property we improve the control performance with maintaining the same robust stability level as that of the onc-dcgree-of-freedom control system. At First we design a two-degree-of-fteedom control system which includes a feedforward controller and a feedback controller. The feedforward controller can be given by specifying a transfer function of a dcsired closed-loop model. We obtain a feedback controller by solving a mixed sensitivity problem. Several numerical results show that two-degree-of-freedom control systems acheive a better control performance than that of one-degree-of-freedom control systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.431-431
• /
• 2000

The modeling of 5-bar linkage robot manipulator dynamics by means of a mathematical and neural architecture is presented. Such a model is applicable to the design of a feedforward controller or adjustment of controller parameters. The inverse model consists of two parts: a mathematical part and a compensation part. In the mathematical part, the subsystems of a 5-bar linkage robot manipulator are constructed by applying Kawato's Feedback-Error-Learning method, and trained by given training data. In the compensation part, MLP backpropagation algorithm is used to compensate the unmodeled dynamics. The forward model is realized from the inverse model using the inverse of inertia matrix and the compensation torque is decoupled in the input torque of the forward model. This scheme can use tile mathematical knowledge of the robot manipulator and analogize the robot characteristics. It is shown that the model is reasonable to be used for design and initial gain tuning of a controller.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.162-166
• /
• 1996

This paper presents a position control of ultra-precision machine tool post using piezoelectric material. A stack-type piezoelectric actuator Is employed in a hinge-type tool holder. An assumed linear transfer function of the practical nonlinear plant is established through the comparison of transfer functions and step responses in the experiments and the simulations. Several types of feedforward/feedback controllers are designed via computer simulations using the assumed linear transfer function. The position tracking control experiments are undertaken to show the control efficiency of each controller.

• 한국정밀공학회지
• /
• 제12권10호
• /
• pp.157-165
• /
• 1995

The new formulation of designing the two degree of freedom(TDF) robust controller is proposed using $H_{\infty}$optimization and model matching method. In this formulation the feedback controller and feedforward controller are designed in a single step using $H_{\infty}$optimization procedure. Roughly speaking, the feedback controller is designed to meet robust stability and disturbance rejection specifications, while the feedforward controller is used to improve the robust model matching properties of the closed loop system. The proposed formulation will be illustrated and evaluated on a seeker scan-loop. And the performances of TDF robust controller are compared with those of the $H_{\infty}$ controller designed using Loop Shaping Design Procedure proposed by McFarlane and Glover.lover.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.997-1001
• /
• 2000

In this paper, the case studies of reducing rotational errors is theoretically done for a grinding spindle with an active magnetic bearing system. The rotational errors acting on the magnetic bearing spindle are due to mass unbalance of rotor, runout, grinding excitation and unmodeled nonlinear dynamics of electromagnets. For the most case, the electrical runout of sensor target is big even in well finished surface, this runout can cause a rotation error amplified by feedback control system. The adaptiveed forward method based on LMS algorithm is discussed to compensate this kind of runout effects, and investigated its effectiveness by numerical simulation and experimental analysis. The electrical runout form the rear sensor target of grind spindle is about 70$\mu\textrm{m}$ with harmonic frequencies. The rotor orbit size in rear bearing is reduced about to 5$\mu\textrm{m}$ due to 1X and 2X rejection by feedforward control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.312-317
• /
• 1996

This paper compares the output voltage control strategies of three-phase PWM inverter for uninterruptible power supply. The feedforward control, feedforward/feedback control, and decoupled feedback control in both the synchronous reference frame and the stationary reference frame are examined. In particular, it is shown that the response of the decoupled feedback controller in the synchronous reference frame can be improved by pole-zero cancellation method. It is also shown that the pole-zero cancellation method reduces to the deadbeat control, when it is implemented with digital controller.