• Journal of Communications and Networks
• /
• 제17권5호
• /
• pp.463-472
• /
• 2015

This paper considers a limited feedback system for two-way wireless relaying channels with physical network coding (PNC). For full feedback systems, the optimal structure with the PNC has already been studied where a modulo operation is employed. In this case, phase and power of two end node channels are adjusted to maximize the minimum distance. Based on this result, we design new quantization methods for the phase and the power in the limited feedback system. By investigating the minimum distance of the received constellation, we present a code-book design to maximize the worst minimum distance. Especially, for quantization of the power for 16-QAM, a new power quantization scheme is proposed to maximize the performance. Also, utilizing the characteristics of the minimum distance observed in our codebook design, we present a power allocation method which does not require any feedback information. Simulation results confirm that our proposed scheme outperforms conventional systems with reduced complexity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.57-60
• /
• 2004

This paper presents multibit Sigma-Delta ADC using Leslie-Singh Structure to Improve nonlinearity of feedback loop. 4-bit flash ADC for multibit Quantization in Sigma Delta modulator offers the following advantages such as lower quantization noise, more accurate white-noise level and more stability over single quantization. For the feedback paths consisting of DAC, the DAC element should have a high matching requirement in order to maintain the linearity performance which can be obtained by the modulator with a multibit quantizer. Thus a Sigma-Delta ADC usually adds the dynamic element matching digital circuit within feedback loop. It occurs complexity of Sigma-Delta Circuit and increase of power dissipation. In this paper using the Leslie-Singh Structure for improving nonliearity of ADC. This structure operate at low oversampling ratio but is difficult to achieve high resolution. So in this paper propose improving loop filter for single-bit feedback multi-bit quantization Sigma-Delta ADC. It obtained 94.3dB signal to noise ratio over 615kHz bandwidth, and 62mW power dissipation at a sampling frequency of 19.6MHz. This Sigma Delta ADC is fabricated in 0.25um CMOS technology with 2.5V supply voltage.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권6호
• /
• pp.1828-1847
• /
• 2014

Coordinated multi-point (CoMP) transmission has been regarded as a potential technology for LTE-Advanced. In frequency division duplexing systems, channel quantization is applied for reporting channel state information (CSI). Considering the dynamic number of cooperation base stations (BSs), asymmetry feature of CoMP channels and high searching complexity, simply increasing the size of the codebook used in traditional multiple antenna systems to quantize the global CSI of CoMP systems directly is infeasible. Per-cell codebook based channel quantization to quantize local CSI for each BS separately is an effective method. In this paper, the theoretical upper bounds of system throughput are derived for two codeword selection schemes, independent codeword selection (ICS) and joint codeword selection (JCS), respectively. The feedback overhead and selection complexity of these two schemes are analyzed. In the simulation, the system throughput of ICS and JCS is compared. Both analysis and simulation results show that JCS has a better tradeoff between system throughput and feedback overhead. The ICS has obvious advantage in complexity, but it needs additional phase information (PI) feedback for obtaining the approximate system throughput with JCS. Under the same number of feedback bits constraint, allocating the number of bits for channel direction information (CDI) and PI quantization can increase the system throughput, but ICS is still inferior to JCS. Based on theoretical analysis and simulation results, some recommendations are given with regard to the application of each scheme respectively.

• 한국통신학회논문지
• /
• 제37A권12호
• /
• pp.1043-1053
• /
• 2012

In distributed video coding (DVC) systems, the complexity of encoders is greatly reduced by removing the motion estimation operations in encoders, since the correlation between frames is utilized in decoders. The transmission of parity bits is requested through the feedback channel, until the related errors are corrected to decode the Wyner-Ziv frames. The requirement to use the feedback channel limits the application of DVC systems. In this paper, we propose an efficient method to remove the feedback channel in DVC systems. First, a simple side information generation method is proposed to calculate the amount of parity bits in the encoder, and it is shown that the proposed method yields good performance with low complexity. Then, by calibrating the theoretical entropy with three parameters, we can calculate the amount of parity bits in the encoder and remove the feedback channel. Moreover, an adaptive method to determine quantization parameters for key frames is proposed. Extensive computer simulations show that the proposed method yields better performance than conventional methods.

• Journal of Communications and Networks
• /
• 제16권1호
• /
• pp.1-9
• /
• 2014

Block diagonalization (BD) has been proposed as a simple and effective technique in multiuser multiple-input multiple-output (MU-MIMO) broadcast channels. However, when channel state information (CSI) knowledge is limited at the transmitter, the performance of the BD may be degraded because inter-user interference cannot be completely eliminated. In this paper, we propose an efficient CSI quantization technique for BD precoded systems with limited feedback where users supported by a base station are selected by dynamic scheduling. First, we express the received signal-to-interference-plus-noise ratio (SINR) when multiple data streams are transmitted to the user, and derive a lower bound expression of the expected received SINR at each user. Then, based on this measure, each user determines its quantized CSI feedback information which maximizes the derived expected SINR, which comprises both the channel direction and the amplitude information. From simulations, we confirm that the proposed SINR-based channel quantization scheme achieves a significant sum rate gain over the conventional method in practical MU-MIMO systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.313-316
• /
• 1999

In this paper, a quantization algorithm by which the accumulative error can be prevented is presented. In digital control systems, the quantization cannot be avoided because of the finite word length of digital computers. The error due to quantization of the computed values may be tolerable in case of directly using them. In case of using the accumulated values, the error between sum of the original values and that of the quantized values becomes larger as the number of the values to be summed increases. Such an increasing accumulative error is critical for the control of precise NC machines, robots and autonomous vehicles. To solve this problem, a quantization algorithm without the accumulative error is presented. Basically, the algorithm is based on the feedback loop by which the accumulationive of the quantization error can be prevented. The error boundness of the proposed algorithm is proven and a computer simulation is performed to show the validity of the algorithm.

• 한국정보기술학회 영문논문지
• /
• 제9권2호
• /
• pp.1-14
• /
• 2019

This paper considers a multiple-input multiple-output (MIMO) power line communication (PLC) network where interference alignment (IA) technique is used to mitigate the interference that arises in multi-user networks. IA as a precoding technique requires perfect channel state information (CSI) to achieve maximum multiplexing gain. Due to the common-mode reception at the receiver ports, we assume imperfect CSI for the IA precoding design. Here, the CSI is quantized and sent via feedback to the transmit ports. For different levels of CSI quantization, we evaluate the performance of various IA algorithms via Monte Carlo simulations. Simulation results reveal the superior performance of the proposed scheme due to common-mode reception in IA MIMO PLC networks. It is shown that for a quantization level of 5 bits, the CM reception improves the sum-rate by up to 70%.

• 한국통신학회논문지
• /
• 제39A권7호
• /
• pp.431-436
• /
• 2014

본 논문에서는 높은 공간 상관도(spatial correlation)를 가지는 massive MIMO(multiple-input multiple-output) 시스템에서 Compressive Sensing 기반의 제한적 피드백 알고리즘을 제안한다. 현실적으로 많은 안테나를 설치하기 위해 기지국에서는 조밀한 uniform square array를 가정하였다. 또한 다중 사용자를 지원하기 위해 기지국에서는 영점강제(zero-forcing) 프리코더를 사용하였다. 시뮬레이션 결과, 제안한 피드백 알고리즘이 기존의 random vector quantization 코드북 보다 더 좋은 성능을 보이고 피드백 오버헤드와 코드북 인덱스를 찾는 계산량이 감소함을 보였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.832-835
• /
• 2004

In this paper, we proposed a blind watermarking algorithm to use characteristics of a scalar quantizer which is similar with the recommended in the JPEG2000 and JPEG. This algorithm shifts a quantization index according to the value of each watermark bit to prevent losing the watermark information during the compression by quantization. Therefore, the watermark is embedded during the process of quantization, not an additional process for watermarking, and adaptively applied as an assigned quantizer according to application area. In the embedding process, a LFSR(Linear feedback shift register) is used to hide the watermarking positions. Therefore the embedded watermark can be extracted by only the owner who knows the initial value of LFSR without the original image. The experimental results showed that the proposed algorithm satisfies the robustness and imperceptibility corresponding to the major requirement of watermarking.

• 한국통신학회논문지
• /
• 제34권9A호
• /
• pp.673-678
• /
• 2009

본 논문은 다중 사용자 MIMO(Multi-User Multiple-Input Multiple-Output) 하향링크 채널 환경에서 시스템 용량을 향상시키기 위한 피드백 방법에 대해 연구하였다. 기존의 피드백 방법인 CVQ (Channel Vector Quantization)는 채널 용량을 증가시키기 위하여 피드백 부하를 증가시킬 뿐만 아니라 양자화 비트 수도 증가시킨다. CVQ는 각각의 사용자가 채널을 미리 정의된 N개의 코드북 벡터 중에서 하나로 양자화하여 그 벡터의 인덱스 값을 피드백한다. 본 논문에서는 피드백 부하의 증가없이 채널 상태 정보를 피드백 해줌으로써 시스템 용량을 향상시키는 새로운 피드백 방법을 제안하였다. 제안한 방법은 컴퓨터 시뮬레이션을 통하여 기존 방법인 CVQ와 성능을 분석하였다. 송신 안테나 수가 두 개인 경우, 제안 방법은 3비트 피드백으로 기존 CVQ 방법 6비트와 동일한 시스템 용량을 얻는 것을 확인 할 수 있었다.