• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1619-1637
• /
• 2000

A review was undertaken to obtain information on the range of beak-trimming methods available or under development. Beak-trimming of commercial layer replacement pullets is a common yet critical management tool that can affect the performance for the life of the flock. The most obvious advantage of beak-trimming is a reduction in cannibalism although the extent of the reduction in cannibalism depends on the strain, season, and type of housing, flock health and other factors. Beak-trimming also improves feed conversion by reducing food wastage. A further advantage of beak-trimming is a reduction in the chronic stress associated with dominance interactions in the flock. Beak-trimming of birds at 7-10 days is favoured by Industry but research over last 10 years has shown that beak-trimming at day-old causes the least stress on birds and efforts are needed to encourage Industry to adopt the practice of beak-trimming birds at day-old. Proper beak-trimming can result in greatly improved layer performance but improper beak-trimming can ruin an other wise good flock of hens. Re-trimming is practiced in most flocks, although there are some flocks that only need one trimming. Given the continuing welfare scrutiny of using a hot blade to cut the beak, attempts have been made to develop more welfare friendly methods of beak-trimming. Despite the developments in design of hot blade beak-trimmers the process has remained largely unchanged. That is, a red-hot blade cuts and cauterises the beak. The variables in the process are blade temperature, cauterisation time, operator ability, severity of trimming, age of trimming, strain of bird and beak length. This method of beak-trimming is still overwhelmingly favoured in Industry and there appears to be no other alternative procedures that are more effective. Sharp secateurs have been used trim the upper beak of both layers and turkeys. Bleeding from the upper mandible ceases shortly after the operation, and despite the regrowth of the beak a reduction of cannibalism has been reported. Very few differences have been noted between behaviour and production of the hot blade and cold blade cut chickens. This method has not been used on a large scale in Industry. There are anecdotal reports of cannibalism outbreaks in birds with regrown beaks. A robotic beak-trimming machine was developed in France, which permitted simultaneous, automated beak-trimming and vaccination of day-old chicks of up to 4,500 chickens per hour. Use of the machine was not successful because if the chicks were not loaded correctly they could drop off the line, receive excessive beak-trimming or very light trimming. Robotic beak-trimming was not effective if there was a variation in the weight or size of chickens. Capsaicin can cause degeneration of sensory nerves in mammals and decreases the rate of beak regrowth by its action on the sensory nerves. Capsaicin is a cheap, non-toxic substance that can be readily applied at the time of less severe beak-trimming. It suffers the disadvantage of causing an extreme burning sensation in operators who come in contact with the substance during its application to the bird. Methods of applying the substance to minimise the risk to operators of coming in contact with capsaicin need to be explored. A method was reported which cuts the beaks with a laser beam in day-old chickens. No details were provided on the type of laser used, or the severity of beak-trimming, but by 16 weeks the beaks of laser trimmed birds resembled the untrimmed beaks, but without the bill tip. Feather pecking and cannibalism during the laying period were highest among the laser trimmed hens. Currently laser machines are available that are transportable and research to investigate the effectiveness of beak-trimming using ablasive and coagulative lasers used in human medicine should be explored. Liquid nitrogen was used to declaw emu toes but was not effective. There was regrowth of the claws and the time and cost involved in the procedure limit the potential of using this process to beak-trim birds.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.8
• /
• pp.866-871
• /
• 2006

The nutrient recovery in phosphate crystallization process was investigated by using laboratory scale uptlow reactors, adopting sequencing batch type configuration. The industrial waste lime was used as potential cation source with magnesium salt($MgCl_2$) as control. The research was focused on its successful application in a novel integrated sludge treatment process, which is comprised of a high performance fermenter followed by a crystallization reactor. In the struvite precipitation test using synthetic wastewater first, which has the similar characteristics with the real fermentation effluent, the considerable nutrient removal(about 60%) in both ammonia and phosphate was observed within $0.5{\sim}1$ hr of retention time. The results also revealed that a minor amount(<5%) of ammonia stripping naturally occurred due to the alkaline(pH 9) characteristic in feed substrate. Stripping of $CO_2$ by air did not increase the struvite precipitation rate but it led to increased ammonia removal. In the second experiment using the fermentation effluent, the optimal dosage of magnesium salt for struvite precipitation was 0.86 g Mg $g^{-1}$ P, similar to the mass ratio of the struvite. The optimal dosage of waste lime was 0.3 g $L^{-1}$, resulting in 80% of $NH_4-N$ and 41% of $PO_4-P$ removal, at about 3 hrs of retention time. In the microscopic analysis, amorphous crystals were mainly observed in the settled solids with waste lime but prism-like crystals were observed with magnesium salt. Based on mass balance analysis for an integrated sludge treatment process(fermenter followed by crystallization reactor) for full-scale application(treatment capacity Q=158,880 $m^3\;d^{-1}$), nutrient recycle loading from the crystallization reactor effluent to the main liquid stream would be significantly reduced(0.13 g N and 0.19 g P per $m^3$ of wastewater, respectively). The results of the experiment reveal therefore that the reuse of waste lime, already an industrial waste, in a nutrient recovery system has various advantages such as higher economical benefits and sustainable treatment of the industrial waste.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.3
• /
• pp.380-385
• /
• 1998

This study evaluated the possible utilization and the replacing range of animal by-product mixture (ABPM) as a dietary fish meal replacer in growing common carp (Cyprinus carpio). ABPM is a mixture of leather meal, meat and bone meal, blood meal and squid liver powder at a specific weight based ratio. Five different diets were formulated on isonitrogenous and isocaloric basis of $40\%$ crude protein and 15.3 KJ/g diet in which white fish meal (WFM) protein was substituted with the ABPM Protein as follows: diet 1, $100\%$ WFM ($0\%$ ABPM, control); diet 2, $75\%$ WFM+$25\%$ ABPM ($25\%$ ABPM); diet $3,\;50\%$ WFM+$50\%$ ABPM ($50\%$ ABPM); diet 4 $25\%$ WFM+$75\%$ ABPM ($75\%$ ABPM); diet $5.0\%$ WFM+$100\%$ ABPM ($100\%$ ABPM). As the dietary protein sources, each diet contained $34.7\%$ of animal protein supplied by white fish meal and/or ABPM and $65.3\%$ of plant protein. After one week of conditioning period, fish averaging 10 g were randomly assigned to each diet treatment as triplicate groups and fed one of the experimental diets for 12 weeks. Weight gain of fish fed diet 1 (control) and 3 were significantly higher than those of fish fed diet 2, 4 and 5 during the first 4 weeks (P< 0.05), while there were no significant differences among all diet groups during the third 4 weeks (P>0.05). Feed conversion ratio of fish fed diet 1 was significantly higher than those fed diet 2, 3, 4 and 5 during the second 4 weeks (P<0.05), while there were no significant differences among all diet groups during the first and the third 4 weeks (P<0.05). There were no significant differences in proximate analysis among fish fed the experimental diets either for the second 4 weeks or the third 4 weeks (P>0.05). These results indicated that ABPM could be used as a fish meal replacer up to $100\%$ in growing common carp.

• The Korean Nurse
• /
• v.34 no.3
• /
• pp.85-98
• /
• 1995

The purpose of this study is to provide basic data regarding effective learning opportunities in childbirth education classes. Also analysis of the data indicates the optimum conditions for the welfare and improvements in the promotion of health in childbearing mothers. The results of this study are as follows; 1) The average age of the subjects in this study was 30.6 years and the total number of subjects was 58 pregnant women. The average number of children was one and 84.5% of the subjects were unemployed even though 63.8% of them held over bachelor's degrees. It was found that 22.4% of the subjects were living in an extended family. Also 61.5% of them were living with parents-in-law. The number of pregnancies were calssified as one, two, or three to nine times with the percentages of 58.7%, 22.4% and 18.9%, respectively. Further, 72.4% of the subjects had no abortion experience and 15.5% had one aborion experience. While 89.7% of the subjects planned to feed their babies with breastmilk, mixed feeding were used by only 22.4% of the sample. These data were collected at about 6 months after delivery. Thus one can see that a low rate of breastfeeding was common. 2) The length of one period of childbirth education is four weeks. It was found that 36.2% of the subjects participated in childbirth education only once, where as 13.8% participated four times and 19% of the subjects participated in this class more than four times. pregnant at least once. Further, 75.9% of the participants were participated in this education through their own will. Their motivation for participation developed through information, advertisement and posters which contained information on childbirth education. Those with unplanned pregnancies 92.9% participated after a suggestion by the nurses. The number of participants in terms of percentage according to the childbirth education contents can be classified as following. The most active participation was shown in preparation of delivery(77.6%), postpartrm management(56.9%) fetal development(37.6%) and physiology of pregnancy(17.2%). It was found that 75.9% of the subjects were willing to participate again if they were given a chance. The reason can be summarized as following: The content of the education is very helpful(47.7%). Scientific knowledge can be obtained through this program(20.5%). Participation helps in achieving psychological stability(9.1%). Participation enables one to establish a friendly relationship with other participants(6.8%) of the sample. 24.1% of the participants did not want to participate again. The reasons can be as following: They do not want another baby(42.9%). The first paricipation in childbirth education gave enough knowledge about childbirth(21.4%). Another reason for not want to participate again was because they had a cesarean birth(14.3%). Only 7.1% of them responded with a negative view. A response that they do not need childbirth education after their operation can be traced back to the general belief that childbirth education is the place where one prepares for natural birth through the Lamaze breathing technique. Of the subjects, 91.4% suggested that this program could be recommended to other childbearing mothers, because this program gave educational content along with psychological stability for childbearing women. Of the subjects 41.4% did not see any efforts towards the welfare of the baby, where as 88.2% did. Among the subjects 58.6% made some effort to eliminate the discomfort of labor by breathing and imagination and breathing and walking. Further 41.7% of the 24 subjects did not do anything toward the welfare of the baby, because they did have a cesarean section so that they didn't have a chance even though they had been educated about childbirth. Also 33.3% of the subjects did not do anything toward the welfare of the baby, because they lacked a willingness. After leaving the hospital, only 75.9% of the subjects did some exercises. The subjects who tried participate this program with their husband accounted for 20.7% of the sample. Interviewing with the subjects solved some of the uneasiness and. fear of delivery, increased self-confidence in parenting and active coping in the delivery process.

• Proceedings of the KOSOMBE Conference
• /
• v.1992 no.05
• /
• pp.27-47
• /
• 1992

Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

• Journal of the Korean Chemical Society
• /
• v.42 no.6
• /
• pp.618-628
• /
• 1998

Pure CaO, Mn-doped CaO, Mn/CaO, and K/CaO catalysts were prepared and tested as catalysts for the oxidative coupling of methane in the temperature range of 600 to 800$^{\circ}C$ to investigate the effects of Mn- and K-addition on the catalytic activity of calcium oxide. To characterize the catalysts, X-ray powder diffraction(XRD), XPS, SEM, DSC, and TG analyses were performed. The catalytic reaction was carried out in a single-pass flow reactor using on-line gas chromatography system. Normalized reaction conditions were generally $p(CH_4)/p(O_2)=250$ Torr/50 Torr, total feed flow rate=30 mL/min, and 1 atm of total pressure with He being used as diluent gas. Among the catalysts tested, 6.3 mol% Mn-doped CaO catalyst showed the best $C_2$ yield of 8.0% with a selectivity of 43.2% at 775$^{\circ}C$. The $C_2$ selectivity increased on lightly doped CaO catalysts, while decreased on heavily doped CaO([Mn] > 6.3 mol%) catalysts. 6 wt.% Mn/CaO and 6 wt.% K/CaO catalysts showed the $C_2$ selectivities of 13.2% and 30.9%, respectively, for the reaction. Electrical conductivities of CaO and Mn-doped CaO were measured in the temperature range of 500 to 1000$^{\circ}C$ at Po2's of $10^{-3}\; to\;10^{-1}\;atm.$ The electrical conductivity was decreased with Mn-doping and increased with increasing $P0_2$in the range of $10^{-3}\;to\;10^{-1}\;atm,$ indicating the specimens to be p-type semiconductors. It was suggested that the interstitial oxygen ions formed near the surface can activate methane and the formation of interstitial oxygen ions was discussed on the basis of solid-state chemistry.

• Korean Journal of Poultry Science
• /
• v.34 no.3
• /
• pp.187-196
• /
• 2007

This experiment was conducted to investigate the effect of dietary single or mixed supplementation of plant extract, fermented medicinal plants and Lactobacillus on performance, nutrient availability, blood characteristics, cecal microflora and intestinal digestive enzymes activity in broiler chickens and to prove the possibility of plant derived compounds and Lactobacillus as an antibiotic growth promoter alternative. A total of eight hundred forty, 1-d-old male broiler chicks (Ross strain) were randomly divided into 7 groups with 4 replicates of 30 birds each. The treatments were NC (antibiotic-free diet), PC (basal diet with 0.05% antibiotics and 0.03% anticoccidials), PE (basal diet with 0.1% plant extract), FMP (basal diet with 0.1% fermented medicinal plants), LB (basal diet with 0.1% probiotics), PE+LB (basal diet with 0.1% plant extract and 0.1% probiotics) and FMP+LB (basal diet with 0.1% fermented medicinal plants and 0.1% probiotics). The final body weight, body weight gain and feed conversion rate in all treated groups tended to be improved or significantly improved as compared to those of NC (P<0.05). PE was significantly high in the final body weight, body weight gain of all treated groups (P<0.05). But the growth performance was significantly lower in all treated groups except PE than PC (P<0.05). No synergic effect in growth performance was found when plant extracts and Lactobacillus were mixed and fed to broilers. The ratio of albumin to globulin was significantly lower in all groups than NC (P<0.05). And the stress indicator (lymphocyte/heterophil ratio) of NC was significantly reduced than other treatments (P<0.05). No significant differences were observed on the numbers of cecal microbes and Lactobacillus. The number of cecal E. coli and Salmonella in FMP and LB were significantly reduced (P<0.05). The activity of intestinal digestive enzymes except to sucrase of treated groups significantly decreased compare to those of controls (P<0.05). These results suggest the possibility that plant extracts and Lactobacillus could be used as the alternative of antibiotic growth promoters by improving the performance of broiler chicks.

• Korean Journal of Agricultural Science
• /
• v.10 no.2
• /
• pp.334-344
• /
• 1983

This study was conducted to investigate the variables affecting the performance of hammer mills by the theoretical and dimensional analysis, and evaluate the power requirements of hammer mills for farm use in Korea. From the theoretical analysis, 16 variables affecting the performance of hammer mills were defined. In order to develop the mathematical relationships among the variables, the dimensional analysis was made for power requirements and $12{\pi}$ parameters were obtained. For the evaluation of the power requirements of hammer mills, approximate rates of grinding for 1HP, 3HP, 5HP, 6HP, 8HP, and 10HP were analyzed. Then, the fineness of grinding recommendation and average feeding rate of grain for livestock which is native cattle, dairy cattle, beef cattle, swine, broilers, and layers, were estimated. Finally number of livestock feeding shelled corn and barley were estimated from the above for one hour's hammer mill operation having the various power requirements. From this study it is known that 5HP is considered as an enough power for feed grinding of any kinds of livestock of Korean farm, as far as the grinding capacity is concerned.

• Korean journal of applied entomology
• /
• v.48 no.4
• /
• pp.467-477
• /
• 2009

Host preference was tested on the 7 species plants against ggot-mae-mi, Lycorma delicatula (Hemiptera: Fulgoridae). This insect highly preferred Ailanthus altissima and Vitis vinifera however, didn't choose the other plants preferentially. Both nymphs and adults lived longest in A. altissima and V. vinifera but lived in short and low ecdysis rate against other plants and 3 species fruits. By analyzing the phloem-feeding behavior using EPG, L. delicatula was showed the short time in non-probing phase and it also exhibit the longest feeding time in A. altissima and V. vinifera, but other plants did not feed the phloem at all. In sugar contents analysis, A. altissima existed high sucrose proportion and followed by fructose>glucose, V. vinifera was analyzed by an order of glucose> fructose>maltose>sucrose>rhamnose, Malus pumila was as glucose> fructose, Pyrus calleryana was as glucose>unkown>fructose, Hibiscus syriacus was as sucrose>glucose. Nymphs and adults of L. delicatula lived longest in 5% sucrose solution, and next is in 5% fructose solution. However, they lived short in other sugar solutions. L. delicatula nymph and adult according to the combination of sugar proportion found in original plants lived longer in sugar combination solution of A. altissima and those of V. vinifera was next. Analyzed original sugar proportion from M. pumila, P. calleryana, H. syriacus respectively, L. delicatula lived short period comparing to the A. altissima, V. vinifera. This result was judged that sugar contents affected on choosing the host plants.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.6
• /
• pp.715-721
• /
• 2007

Residual calcium concentration is high, in general, at the effluent of the fluoride removal process in the electronics industry manufacturing semiconductor and LCD. To increase the stability of the membrane process incorporated for reuse of wastewater, the residual calcium is required to be pre-removed. Hyperkinetic Vortex Crystallization(HVC) process was installed in the electronics industry manufecturing semi conductor as a pilot scale for accelerating calcification of calcium ion. Compared to the conventional soda ash method, the 31% higher calcium removal efficiency was achieved when HVC was applied at the same sodium carbonate dosage. In order to maintain the economic calcium removal target of 70% preset by manufacturer, the dosing concentration of the soda ash was 530 mg/L based on influent flowrate. The seed concentration in the reactor was one of the critical factors and should be maintained in the range of $800\sim1,200mg$ SS/L to maximize the calcium removal efficiency. The calcite production rate was 0.30 g SS/g $Na_2CO_3$ in the average. The economic HVC passing time of the mixture was in the range of $2\sim5$ times. Relatively, stable calcium concentration was maintained in the range of $30\sim72$ mg/L(average 49 mg/L) although the calcium concentration in the feed was severely fluctuated with $74\sim359$ mg/L(average 173 mg/L). The HVC process was characterized as environment-friendly technology reducing chemical dosage and chemical sludge production and minimizing maintenance cost.