• Title/Summary/Keyword: Feed-Rate

Search Result 2,693, Processing Time 0.029 seconds

Comparative Study on the Resistance of Three Commercial Strains and Balady (Local) Breed of Chickens to Infection With Salmonella gallinarum

  • Alshawabkeh, K.;Tabbaa, M.J.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.14 no.1
    • /
    • pp.96-100
    • /
    • 2001
  • Three commercial strains bred in the US (Hubbard), Holland (Lohman), and Canada (Shaver) and Balady breed of chickens were orally infected with $10^6$ cfu of Salmonella gallinarum per chick. Chicks were compared for weight gain, feed intake, feed conversion ratio, mortality rate and contamination of the liver, spleen and intestine with Salmonella gallinarum on the day of slaughter. The Balady chicks had significantly the lowest mortality rate (p<0.01) and weight gain (p<0.001) and poorest feed conversion ratio (p<0.001). Salmonella gallinarum could be shed from the liver, spleen and intestine with alternative rates in all strains. Lohman was the most resistance over the other two commercial strains, while Hubbard had the highest susceptibility. The Balady chicks were the most resistance. However, they may serve as a possible reservoir of Salmonella gallinarum and it may play a role of spreading the infection to the commercial farms in Jordan.

Al5052 Welding by $CO_2$ Laser using Filler Wire (용접 와이어를 사용한 Al5052 $CO_2$ 레이저 용접)

  • 박기영;이경돈;김주관
    • Laser Solutions
    • /
    • v.5 no.1
    • /
    • pp.13-21
    • /
    • 2002
  • Compared to conventional welding process, laser welding does not use additional filler wire generally. However, if laser welding uses the filler wire, the applicability of the method can be broaden. When laser welding uses the filler wire, it is possible to enhance gap bridging ability and to prevent cracking in weld pool by metallurgical control. In this study, we had optimal condition and experimented gap bridging capability for butt welding with 2㎜ Al5052 alloys using the filler wire feeder. As the experimental parameters, wire feed rate and wire diameter are considered and then the performance of wire feed is evaluated under various filler wire welding conditions.

  • PDF

Effects of Bacillus subtilis on Growth Performance and Resistance to Salmonella Infection in Broiler Chickens

  • Yoo, Jae Hong
    • Korean Journal of Poultry Science
    • /
    • v.40 no.3
    • /
    • pp.277-281
    • /
    • 2013
  • The experiment was undertaken to see the effects of Bacillus sp. on the growth performance and disease resistance to Salmonella sp. infections. The use of probiotic microbes in poultry is commonly practiced. In this study, Bacillus subtilis was tested using a total of 120 chicks of age of 1 day after hatching. The growth traits examined were body weight gain and feed conversion rate. And also, the Salmonella resistance of Bacillus subtilis was tested after the chicks were orally administered with Salmonella pullorum by gavage force injections. The result showed that Bacillus subtilis yielded a high feed efficiency, consequently increased growth rate. For the effect of Bacillus subtilis on Salmonella infection, Bacillus subtilis significantly improved the resistance to Salmonella pullorum infection. Various clinical symptoms of Salmonella infection were highly decreased by addition of Bacillus sp.

Documentation of Physiological Parameters and Blood Profile in Newly Born Kajli Lambs

  • Saddiqi, H.A.;Nisa, M.;Mukhtar, N.;Shahzad, M.A.;Jabbar, A.;Sarwar, M.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.24 no.7
    • /
    • pp.912-918
    • /
    • 2011
  • Newly born lambs have to face challenges in a new environment totally different from that of the uterus. Adaptation to extra-uterine life involves functional changes with almost each organ and system in the body undergoing a series of metabolic and anatomical modifications. Failure to adapt the extra-uterine environment can not only lead to homeostatic disturbances but also lead to the death of the affected lambs. Hematological parameters of newly born lambs show variability that differs between breeds of lambs. The purpose of present study was to determine homeostatic responses and physiological reference values in Kajli breed lambs occurring in the neonatal period through changes in blood profile, respiratory rate, heart rate, live weight and rectal, scrotal and skin temperatures. For this purpose, sixteen clinically fit lambs (males = 10 and females = 6) with a mean body weight $6.92{\pm}0.46$ kg were selected. Physiological data of selected parameters of each Kajli lamb was recorded at three day intervals and hematological parameters at five days for a period of 30 days. In general, statistical analysis showed a significant effect of time (p<0.001) on all the studied physiological and hematological parameters except platelets counts, white blood cells and hemoglobin concentration. The results documented in the current study are an addition to existing knowledge of the physiology of Kajli sheep breed should be helpful in developing feeding, disease diagnoses and treatment protocols for newborn Kajli stock.

Effects of Different Numbers of Feeding Days and Feeding Rate on Growth of Growing-out Flounder Paralichthys olivaceus (사료 공급일수 및 공급율이 육성기 넙치(Paralichthys olivaceus)의 성장에 미치는 영향)

  • Kim, Kyoung-Duck;Kim, Kang-Woong;Bae, Ki-Min;Son, Maeng Hyun;An, Cheul Min
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.45 no.5
    • /
    • pp.523-526
    • /
    • 2012
  • This study evaluated the effects of the number of feeding days and feeding rate on the growth of growing-out flounder Paralichthys olivaceus. Three replicated groups of fish ($141{\pm}1.9g$) were hand-fed a commercial feed under different feeding regimes for 9 weeks. Fish in group 6F-1S were fed to satiation twice daily for 6 consecutive days and starved for 1 day. Fish in groups 4F-1S and 3F-1S were fed to satiation twice daily for 4 and 3 days, respectively, and starved for 1 day. Fish in group 6F-90% were fed a diet of 90% of 6F-1S twice daily for 6 consecutive days and starved for 1 day. The weight gain, feed efficiency and daily feed intake of the fish groups in 4F-1S and 3F-1S were not significantly different from those of group 6F-1S. The weight gain and feed efficiency of fish in group 6F-90% were not significantly different from those of group 6F-1S. The results of this study suggest that the growth of growing-out flounder fed to satiation twice daily for 4 or 3 days after starving 1 day was similar to that of fish fed to satiation for 6 days, and that the proper feeding rate for growth could be lowered to 90% of satiation without growth suppression.

A Study on the Surface Roughness Influenced by SM45C Hardness in High Frequency Induction Hardening (고주파열처리에 의한 SM45C 경도가 가공 표면 품위에 미치는 영향에 관한 연구)

  • Kim, W.I.;Heo, S.J.
    • Journal of the Korean Society for Heat Treatment
    • /
    • v.6 no.1
    • /
    • pp.1-8
    • /
    • 1993
  • In this paper, the surface roughness influenced by Sm45C hardness in high frequency induction hardening and mechanical characteristics for the changed Hv 598 part and the unchanged hardness Hv 223 part by use of cermet and ceramic cutting tools was experimentally examined. Finally, we could be had some important results by processing surface roughness on cutting conditions such as cutting speed, feed rate, depth of cut and changes of tool nose radius. The results are summarized as follows. 1. In case of the same cutting condition, the hardness of workpiece was high and acquired the best processing surface roughness when the radius of the tool nose had 0.8 mm and feed rate was 0.04 mm/rev. 2. In case of the hardness of workpiece, though the cutting speed didn't have an effect on processing surface roughness, the less feed rate and the more processing surface roughness improved. On the other hand, the low inside the hardness of workpiece, the more cutting speed and the more feed rate increase, the processing surface of roughness improved. 3. Regardless of the hardness of workpiece, the change of the cutting depth didn't have great effect on the surface roughness. 4. On cutting the high surface hardness part with cutting tools of cermet and ceramic, it can be acquired the higher processing surface roughness because it hadn't been taken effect on cutting speed, In case of the cutting process of the low inside hardness part the two cutting tools have acquired the similar processing surface roughness.

  • PDF

One-dimensional Numerical Analysis of the Effect of Seawater Feed Rate on Multi-effect Solar Stills (태양열 담수기 다중효용부의 해수 공급유량에 관한 1차원 수치해석)

  • Lim, Byung-Ju;Yu, Sang-Seok;Park, Change-Dae;Chung, Kyung-Yul
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.40 no.7
    • /
    • pp.477-484
    • /
    • 2016
  • In a multi-effect solar distiller, a feeding rate of seawater to each effect should be decreased as the effect number is increased. In previous studies, the feed rate of seawater was not reduced evenly between the effects, which is unreasonable, since the thermal energy input of each effect decreases by the same amount. In this work, numerical analysis was carried out in order to elucidate this discrepancy. The results showed that the amount of distillates produced was almost the same for both evenly and unevenly reduced flow rates between the effects. Optimum feed rates of seawater with various energy inputs from exhaust gas heat exchanger were also obtained. The results showed that the optimum feed rate of the first effect increased linearly or reached a steady state depending on the heat flux.

A Study on the Machining Characteristics of SCM415 Steel with Small Deep Inner Diameter Holes Using CNC Automatic Lathes (CNC 자동선반을 이용한 SCM415강의 소형 깊은 내경홀 가공 특성 연구)

  • Choi, Chul-Woong;Kim, Jin-su
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.21 no.4
    • /
    • pp.23-30
    • /
    • 2022
  • Small-scale production is increasing, and the manufacturing industry is gradually changing into a smart manufacturing industry. Therefore, research on securing optimal cutting conditions for factors affecting machining precision during cutting is very important. Therefore, the purpose of this study is to After machining the inner diameter hole of SCM415 steel with a cermet tool on a CNC automatic lathe, the surface roughness, dimensional accuracy, and dimensional straightness are measured according to the feed rate to analyze the machining characteristics and suggest optimal cutting conditions. The test material was cut using a cermet tool for secondary cutting after a round bar with a diameter of 20 mm was mounted on a CNC automatic lathe. The cutting length was fixed at 0.5 mm, and the cutting speed was fixed at 3200 rpm. When the feed rate was changed to 0.05, 0.1, and 0.15 mm/rev, the respective surface roughness during the 15th test was measured. Consequently, The lower the feed rate, the better is the surface roughness. In addition, the optimum cutting conditions for SCM415 steel were observed to be the most ideal cutting conditions than the condition of 0.05 mm/rev at a cutting speed of 3,200 rpm and a feed rate of 0.1 mm/rev.

Study on the rumen fermentation, growth performance and carcass characteristics according to the supplementation of lupin flake in Hanwoo steers

  • Kyung-Hwan, Um;Byung-Ki, Park
    • Journal of Animal Science and Technology
    • /
    • v.64 no.6
    • /
    • pp.1077-1091
    • /
    • 2022
  • This study was conducted to determine the rumen fermentation dynamics of lupin flakes and elucidate the effects of lupin flake supplementation on the growth performance, blood metabolites, and carcass characteristics of Hanwoo steers. In vitro and in situ trials of lupin grains and lupin flakes were conducted using three Hanwoo cows with rumen fistulas. The feeding trial included 40 early-fattening Hanwoo steers randomly divided into four groups: control, T1, T2, and T3. Their formula feed contained 0%, 3%, 6%, and 9% lupin flakes, respectively. In vitro rumen pH and ammonia concentrations were lower in the lupin flake group than in the lupin grain group after 6 and 24 h of incubation, respectively (p < 0.05). Concentrations of propionate, butyrate, and total volatile fatty acids were higher in the lupin flake group than in the lupin grain group after 12 h of incubation (p < 0.05), as was the crude protein disappearance rate at 9 and 12 h of rumen fermentation (p < 0.05). Supplementation with lupin flakes did not affect the average daily gain. Compared to that in the control group, dry matter intake was lower in the lupin flake-supplemented groups (p < 0.05); the feed conversion ratio was lower in T2 and T3 (p < 0.05); and plasma total protein concentration in 29-month-old steers was lower in T1 and T3 (p < 0.05). Plasma triglyceride concentration was lower in the lupin flake-supplemented groups than in the control group (p < 0.05). The incidence rate of yield grade A was higher in T1 and T2 than in the control group; the incidence rate of meat quality 1+ grade or higher was highest in T2. The carcass auction price was higher in T2 than in the other groups. Overall, compared to whole lupin grains, lupin flakes seem to more substantially affect rumen ammonia concentrations and crude protein disappearance rate. Additionally, we suggest that supplementation with 6% lupin flake formula feed exerts positive effects on the feed conversion ratio, yield grade, and quality grade of Hanwoo steers.

Effect of Feedrate and Specimen Shape on Cutting Force and Surface Roughness of Ultrasonic Dental Surgical Instrument (치과용 초음파 수술기의 이송속도 및 시편형상이 절삭반력과 표면거칠기에 미치는 영향)

  • Sang Ho Kim;Seung Han Yang;Joong Ho Lee;Jong Kyun Choi
    • Journal of Biomedical Engineering Research
    • /
    • v.44 no.2
    • /
    • pp.109-117
    • /
    • 2023
  • In this study, the effect of the shape of the specimen and the feedrate of the dental ultrasonic surgical instrument on the cutting force and surface roughness of the specimen is analyzed. Experimental specimens were made of SAWBONES artificial bone materials in square and spherical specimens. In addition, the cutting feedrate of the surgical instrument was controlled through the developed moving system. The cutting force generated when cutting the specimen was measured through a force sensor. After the experiment, the cutting surface of the specimen was observed through a three-dimensional optical microscope and the surface roughness was measured. Through one-way ANOVA, the effect of each specimen shape and feed rate on surface roughness was analyzed. As a result of the experiment, the cutting force increased proportionally in the initial feed rate increase stage, but the increase in cutting force decreased as the feed rate continued to increase. Also, the cutting force showed a difference according to the shape of the specimen. The spherical specimen with a relatively small cutting surface area had less cutting force than the square specimen. However, as a result of one-way ANOVA, it was found that the specimen shape and feed rate did not affect the surface roughness. In future studies, it is expected to be used for comparative analysis of ultrasonic surgical instruments and correlation analysis between cutting factors.