• Title/Summary/Keyword: Feed-Rate

Search Result 2,693, Processing Time 0.023 seconds

Effects of Benzoic Acid and Dietary Calcium:Phosphorus Ratio on Performance and Mineral Metabolism of Weanling Pigs

  • Gutzwiller, A.;Schlegel, P.;Guggisberg, D.;Stoll, P.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.27 no.4
    • /
    • pp.530-536
    • /
    • 2014
  • In a $2{\times}2$ factorial experiment the hypotheses tested were that the metabolic acid load caused by benzoic acid (BA) added to the feed affects bone mineralization of weanling pigs, and that a wide dietary calcium (Ca) to phosphorus (P) ratio in phytase-supplemented feeds with a marginal P concentration has a positive effect on bone mineralization. The four experimental diets, which contained 0.4% P and were supplemented with 1,000 FTU phytase/kg, contained either 5 g BA/kg or no BA and either 0.77% Ca or 0.57% Ca. The 68 four-week-old Large White pigs were fed the experimental diets ad libitum for six weeks and were then slaughtered. Benzoic acid increased feed intake (p = 0.009) and growth rate (p = 0.051), but did not influence the feed conversion ratio (p>0.10). Benzoic acid decreased the pH of the urine (p = 0.031), but did not affect breaking strength and mineralization of the tibia (p>0.10). The wide Ca:P ratio decreased feed intake (p = 0.034) and growth rate (p = 0.007) and impaired feed the conversion ratio (p = 0.027), but increased the mineral concentration in the fat-free DM of the tibia (p = 0.013) without influencing its breaking strength (p>0.10). The observed positive effect of the wide Ca:P ratio on bone mineralization may be attributed, at least in part, to the impaired feed conversion ratio, i.e. to the higher feed intake and consequently to the higher mineral intake per kg BW gain. The negative impact on animal performance of the wide dietary Ca:P ratio outweighs its potentially positive effect on bone mineralization, precluding its implementation under practical feeding conditions.

Effects of Charcoal Application on Ammonia Emission and Nitrogen Use Efficiency of Pig Slurry in the Vegetative Growth of Maize (Zea Mays L.)

  • Lee, Seung Bin;Park, Sang Hyun;Kim, Tae Hwan
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.41 no.4
    • /
    • pp.280-286
    • /
    • 2021
  • The objective of this study was to prove the effect of pig slurry application with charcoal on nitrogen use efficiency (NUE), feed value and ammonia (NH3) emission from maize forage. The four treatments were applied: 1) non-pig slurry (only water as a control), 2) only pig slurry application (PS), 3) pig slurry application with large particle charcoal (LC), 4) pig slurry application with small particle charcoal (SC). The pig slurry was applied at a rate of 150 kg N ha-1, and the charcoal was applied at a rate of 300 kg ha-1 regardless of the size. To determine the feed value of maize, crude protein, dry matter intake, digestible dry matter, total digestible nutrient, and relative feed value were investigated. All feed value was increased by charcoal treatment compared to water and PS treatment. Also, the NUE for plant N was significantly higher in charcoal treatments (LC and SC) compared to PS treatment. On the other hand, there is no significant difference for feed value and NUE between LC and SC. The NH3 emission was significantly reduced 15.2% and 27.9% by LC and SC, respectively, compared to PS. Especially, SC significantly decreased NH3 emission by 15% compared to LC. The present study clearly showed that charcoal application exhibited positive potential in nitrogen use efficiency, feed value and reducing N losses through NH3 emission.

The Effects of Operational and Mechanical Factors on the Performance of Rice-Husk Furnace (왕겨연소기(燃燒機)의 성능(性能)에 영향(影響)을 마치는 설계(設計) 및 작동인자(作動因子)에 관(關)한 연구(硏究))

  • Park, Seung Je;Noh, Sang Ha
    • Journal of Biosystems Engineering
    • /
    • v.8 no.2
    • /
    • pp.39-48
    • /
    • 1983
  • This study was performed to obtain the basic data which could be used for the modification of the manual center-burner-type rice-husk furnace into a small scale automatic type for the multi-purpose use in the farm. For this purpose, first, the utilization feasibility of the rice-husk furnace in the farm was analyzed briefly in aspects of available amount of rice-husk for the fuel, annual operation time and replaceble amount of residential heating energy with rice-husk in the farm. For the experiment a prototype furnace geared with an automatic feeding device was fabricated, and feed rate, mold size and chimney height were changed to investigate the combustion efficiency of rice-husk and thermal efficiency of the furnace. Also, optimum and limiting operational factors were observed in each treatments. The results obtained are summarized as follows. 1. If the rice-husk is intensively used for residential heating in the farm for winter season, on an average 51 percent of the total heating energy can be replaced with the rice-husk. Therefore, development of a small scale automatic rice-husk furnace was recognized to be feasible. 2. The operational condition depending on husk-feed rates was very important factor for successive steady burning operation of the given furnace. When the feed-rate was 1.5 kg/hr, the top of the burning zone should be kept at the position about 55 cm from the bottom of the combustion chamber with the periodic removal of ash (termed as steady state position), which was 18 cm above the mold waist. When the feed rates were 2.4 kg/hr and 3.0 kg/hr, the steady state position was at about 4 cm above the mold waist. 3. The mold size affected inflow rate of air into the furnace and consequently CO content in the exhaust gas. The relatively bigger mold gave positive effect on the air-inflow rate. 4. When the husk-feed rates were 1.5 kg/hr, 2.4 kg/hr, 3.0 kg/hr, the combustion efficiencies of the rice-husk were 98.5%, 97.4% and 95.0%, the thermal efficiencies of the furnace were 93.4%, 93.2% and 87.6%, and CO content in the exhaust gas were 1.21%, 1.03%, and 2.43%, respectively. The air-inflow rates were decreased with the increase of feed rates. When the amount of excess air was 30-40%, the CO content in the exhaust gas was at the minimum level. 5. When the chimney height was lowered from 260 cm to 96 cm, the air-inflow rate was slightly decreased, but the average temperature in the combustion chamber, CO content in the exhaust gas and combustion and thermal efficiencies were not changed significantly. 6. The incidental problems associated with the protytype furnace were accumulation of the ash inside the mold, accumulation of the cinder between the outer-drum of the furnace and the combustion chamber wall, and accumulation of the cinder in the chimney.

  • PDF

Wear Mechanism and Machinability of PCD Tool in Turning Tungsten Carbides (초경합금재의 선반절삭에 있어서 PCD공구의 마멸 기구와 절삭성)

  • Heo, Sung Jung
    • Journal of the Korean Society of Manufacturing Technology Engineers
    • /
    • v.22 no.1
    • /
    • pp.85-91
    • /
    • 2013
  • The machinability of wear-resistible tungsten carbides and the tool wear behavior in machining of V30 and V50 tungsten carbides using PCD (Poly Crystalline Diamond) cutting tool was investigated to understand machining characteristics. This material is one of the difficult-to-cut materials in present, but their usage has been already broadened to every commercial applications such as mining tools, and impact resistant tools etc. Summary of the results are as follows. (1) Tool wear progression of PCD tools in turning of wear-resistible tungsten carbides were observed specially fast in primary cutting distance within 10m. (2) Three components of cutting resistance in this research were different in balance from the ordinary cutting such as that cutting of steel or cast iron. Those were expressed large value by order of thrust force, principal force, feed force. (3) If presume from viewpoint of high efficient cutting within this research, a proper cutting speed was 15m/min and a proper feed rate was 0.1mm/rev. In this case, it was found that the tool life of PCD tool was cutting distance until 230m approximately. (4) In cutting of wear-resistible tungsten carbides such as V30 and V50, it was recognized that the tool wear rate of V30 was very fast as compared with V50. (5) When the depth of cut was 0.1mm, there was no influence of the feed rate on the feed force. And the feed force tended to decrease as the cutting distance was long, because the tool was worn and the tool edge retreated. (6) It was observed that the tungsten carbides were adhered to the flank.

Effects of Repeated Food Deprivation on Growth and Survival of the Juvenile Olive Flounder Paralichthys olivaceus (넙치 Paralichthys olivaceus 치어의 성장과 생존에 미치는 반복적 절식의 영향)

  • Kim, Hyo-Chan;Kang, Duk-Young;Chang, Young-Jin
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.41 no.2
    • /
    • pp.125-133
    • /
    • 2008
  • To investigate the effect of repeated food deprivation and refeeding on the hyperphagia, compensatory growth, feed efficiency, body composition, hepatosomatic index (HSI), and survival rate of the juvenile olive flounder Paralichthys olivaceus, an experiment was conducted for 90 days. Feeding treatments consisted of the following five regimes for 90 days from August to October, 2005: C: daily satiation feeding (control), S1: 1-day satiation feeding after 1-day food deprivation, S2: 1-day satiation feeding after 2-day food deprivation, S3: 1-day satiation feeding after 3-day food deprivation and S4: 1-day satiation feeding after 4-day food deprivation, respectively. Although the monthly feed intake (MFI) of the control was significantly higher than that of all of the starved groups, the daily feed intake (DFI) was more higher in S1, S2, and S3 than that in the control as a result of hyperphagia after starvation. While the feed efficiency in the summer (to day 30) decreased in all of the starved groups with prolongation of the starvation period, the feed efficiency in the autumn (to day 90) was increased with prolongation of the starvation period. The whole body proximate composition and HSI were also affected by starvation. The crude protein, lipid, and HSI decreased with prolongation of the starvation period, whereas the crude ash and moisture increased. The growth rate and condition factor also decreased in proportion to the starvation period. The survival rate was highest in the control and was the lowest in S4. In this study, although hyperphagia occurred in the deprived groups, we knew that the compensatory growth did not always occur.

Effect of Dietary Energy, Protein on Growth and Blood Composition of Cross Bred Chicks (유색육용계의 성장과 혈액성상에 사료단백질 및 에너지가 미치는 영향)

  • Jeong, Y.D.;Ryu, K.S.
    • Korean Journal of Poultry Science
    • /
    • v.35 no.3
    • /
    • pp.291-302
    • /
    • 2008
  • To acquire essentially necessary basic data to establish feeding system by verifying appropriate dietary energy and protein level for the growth of commercial slow growing broiler chicks within the country, two experiments were conducted for 5 weeks. One day old, 1,404 male and female broiler chicks were used for the experiments, and 26 chicks were placed at each pen. The energy level of feed was maintained about 3,000 or 3,100 kg/kcal for whole breeding period of 5 weeks, and protein content was adjusted about 20, 21, and 22% during the first two weeks and the content was adjusted to 18, 19, 20, 21, and 22% from the 3 to 5 weeks old of the experiment. The categories of body weight and feed intake amount were monitored to calculate the productivity and blood sampling was conducted for the analysis at the end of each experiment. Experiment 1:Although the productivity by the ME content difference during $0{\sim}2$ weeks did not have significant difference and the body weight increase by the difference of CP content and feed intake amount did not have much difference, the feed requirement rate was statistically improved in CP 21 and 22% treatment groups compared to the CP 20% group (P<0.05). The feed ME 3,100 kcal/kg treated group during $3{\sim}5$ weeks after starting the experiment revealed to show improved feed requirement rate (P<0.05). Within the period of experiment, the CP 22% treated group resulted to show significant body weight increase compared to the groups treated with low levels of CP (P<0.05) and the feed requirement rate was improved in high CP treated group compared to low CP treated groups, but the feed intake amount did not show significant difference between treated groups. During the experiment period, the body weight increase and feed requirement rate revealed to interact between ME and CP (P<0.05). During the whole experiment period of the 5 weeks, the feed requirement rate was improved in ME 3,100 kcal/kg treated group than the groups treated with ME 3,000 kcal/kg, and the CP (20) 18% treatment groups resulted to show higher values than other treatment groups (P<0.05). Body weight increase was high in CP (22) 22% treated groups than those of CP (21) 21% and (20) 18% treated groups, and the interaction between ME and CP was found at body weight increase and feed requirement rate (P<0.05). Although blood albumin and total cholesterol levels were elevated in ME 3,100 kcal/kg treated group than ME 3,000 kcal/kg treated group, but neutral fat content was reduced (P<0.05). On the other hand, the total cholesterol content was increased in CP (22) 21% treated group than CP (22) 20% and CP (20) 18% treated groups (P<0.05). Experiment 2: The body weight increase in 0-2 weeks was higher in ME 3,100 kcal/kg treated group than ME 3,000 kcal/kg treated group, and it was highly improved in CP 22% treated group than CP 20% treated group by showing the interaction between CP and ME (P<0.05). The significant improvement of feed requirement rate was observed in CP 21% and 22% treated groups compared to CP 20% treated group (P<0.05). The productivity between the growth period from 3 to 5 weeks of age and whole growth period resulted to show no significant difference. Although no difference was observed in blood composition between treated groups, the interaction of ME and CP on cholesterol content was accepted at the range of P<0.05). Therefore, it is considered that the appropriate dietary protein level within feed for the physiology of growing broiler chicks was 22% or more for the first two weeks and protein level of 21% or 20% from 3 to 5 weeks old for the maximization of productivity. Even if the energy level within feed had some partial effects on the productivity, but did not show consistency. So, further experiments needto be conducted by differentiating the energy level.

Treatment of Cow Manure by Vermicomposting -Effects of population density and C/N ratios of feed on the growth and cast production of the earthworm(Eisenia foetida)- (Vermicompositing에 의한 우분의 처리 -먹이의 탄질율과 사육밀도가 지렁이의 생육과 분립의 생산에 미치는 영향-)

  • Lee, Ju-Sam
    • Journal of Animal Environmental Science
    • /
    • v.1 no.1
    • /
    • pp.65-75
    • /
    • 1995
  • This experiment was carried out to the effects of population density and C/N ratios of feed on the growth, reproductive effciency and cast producation of the earthworm(Eisenia foetida). The population densities of 50, 100, 150, 200 and 250 individuals of the earthworm fed with different C/N ratios of 25, 35, 45 and 55 cow manures were studied in rearing box($6,400cm^3$), and at the fertility stage during a period of 60 days. The results were summarized as follows; The survial rate(SR), increasing rate(IR), reproductive efficiency(RE) and cast production of the earthworms showed highest values in C/N ratio of 25. These results may indicate that C/N ratio of 25 is a very favourable feed for the growth of the earthworms. The survial rate(SR) indicated significant positive correlation with reproductive efficiency(RE) in different C/N ratios of feeds. The survial rate(SR) showed highest values in population densities of $50{\sim}100$ worms/$6,400cm^3(64.0{\sim}128.0cm^3/worm$). On the contrary, increasing rate(IR) tended to decreased with the increased population densities. The survival rate(SR) indicated significant negative correlation with reproductive efficiency(RE) in different population densities of the earthworms. The cast production estimated were $31.6mg{\sim}67.4mg/day/worm$ grown in optimum population densities($50{\sim}100\;worms/6,400cm^3$). The earthworm casting are an excellent soil conditioning material or organic fertilizer sources with a high chemical composition and their physical properties.

  • PDF

A simulation of steady and dynamic states of methanol reforming reaction (메탄올 개질반응의 정상 및 동특성 모사)

  • 김경미;최영순;송형근
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1989.10a
    • /
    • pp.395-398
    • /
    • 1989
  • A two dimensional pseudo-homogeneous model for the methanol reforming reaction was developed and its steady and dynamic states were studied by a computer simulation. The reactor tube diameter, the catalyst density in the fixed bed, the feed flow rate, the feed temperature and the external temperature were chosen to be adjusted to determine the length of the reactor. The dynamics of the reactor showed that the system was highly nonlinear and sensitive to the feed disturbances.

  • PDF

Effects of Humic Acid and Blueberry Leaf Powder Supplementation in Feeds on the Productivity, Blood and Meat Quality of Finishing Pigs

  • Kim, Kwonjung;Bae, Inkyu;Cho, Jinho;Choi, Yangil;Ha, Jungheun;Choi, Jungseok
    • Food Science of Animal Resources
    • /
    • v.39 no.2
    • /
    • pp.276-285
    • /
    • 2019
  • The objective of this study was to determine effects of humic acid (HA) and blueberry leaf powder (BLP) supplementation in pig feed on productivity, blood profiles, and meat quality characteristics of longissimus muscle. The experimental design included six treatments: 1) CON, no addition; 2) T1, BLP 0.1%; 3) T2, BLP 0.2%; 4) T3, humic acid 2%; 5) T4: humic acid 2%+BLP 0.1%; and 6) T5: humic acid 2%+BLP 0.2%. HA and BLP supplementation in pig feed significantly increased average daily feed intake (ADFI) values (p<0.05). HA supplementation in pig feed had beneficial effects in lipid profiles without altering feed efficiency rate (FER). HA and BLP co-supplementation in pig feed decreased pH in longissimus thoracis (p<0.05). In addition, sensory characteristics were enhanced when pig feed was supplemented with HA and BLP without causing adverse effects in meat quality. Taken together, addition of HA and BLP in pig feed may produce functional meat products.

In Situ Ruminal Digestion Kinetics of Forages and Feed Byproducts in Cattle and Buffalo

  • Sarwar, M.;Mahr-un-Nisa, Mahr-un-Nisa;Bhatti, S.A.;Ali, C.S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.11 no.2
    • /
    • pp.128-132
    • /
    • 1998
  • The relative disappearance and rate of degradation of dry matter (DM) and neutral detergent fiber (NDF) of nine different feedstuffs were determined by simultaneously suspending groups of substrates, using the nylon bags, in the rumen of males of Sahiwal cattle and Nili-Ravi buffalo. The digestion kinetics of leguminous forages (Lucerne, berseem and cowpeas) and feed byproducts (cotton seed cake, wheat bran and wheat straw) did not differ between the two species. However, the DM and NDF digestibilities and rates of digestion of grasses and wheat straw were greater in buffalo than in cow bulls, indicating that buffaloes are better converters of poor quality roughages than are Sahiwal. The lag time for DM of grasses did not differ between these two species but the NDF lag time was lower in buffalo than in cows, indicating that both the rate and lag time of digestion may be reliable indicators for assessing the NDF quality.