• Journal of the Korean Society of Clothing and Textiles
• /
• 제30권4호
• /
• pp.595-606
• /
• 2006

Benefits of breast-feeding are so well known that mothers want to breast-feed their children. However there are a few difficulties to breast-feed when they are out for the purpose of work, visit and other social activities. The exposure of the breast is one of them. With the results of 2 surveys, 6 designs were developed. The extinguishing design features were breast openings, which were developed using various fastenings such as elastic tape, buckle, zipper, velcro, snap and button. Three outer wear designs of selected breast openings were developed. These three researched designs were made of proper materials. The purpose of this study is to develop outer wears of functionality and good design for breast-feeding mothers.

• Proceedings of the Membrane Society of Korea Conference
• /
• 한국막학회 1994년도 심포지움시리즈 Jan-94 기체분리막 기술 및 응용
• /
• pp.1-21
• /
• 1994

There are growing needs to produce relatively high purity (99.0% or higher) oxygen at low cost. For small scale production, both pressure swing adsorption (PSA) and membrane process are competitve and less expensive or more convient than well known crygenic fractionation technology. A continuous membrane colume (CMC) combined with a PSA oxygen generator can be employed to produce high purity oxygen continuosly. The oxygen-enriched gas generated by a PSA unit, with a concentration of 93-94%, is fed to the CMC that consists of three modules of poly(imide) hollow fibers. Several experiments were conducted by varying parameters, such feed flow rate, transmenbrane pressure drop, stage cut, and feed location in order to obtain a high oxygen concentration above 99.0%. A two-series unit mode was also employed with CMC operation to optimize the given membrane area.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• 제45권1호
• /
• pp.20-27
• /
• 2008

In this paper, a nonlinear classifier of a feed-forward neural network is implemented on an FPGA chip. The feedforward neural network is implemented in hardware for fast parallel processing. After off line training of neural network, weight values are saved and used to perform forward propagation of neural processing. As an example, AND and XOR digital logic classification is conducted in off line, and then weight values are used in neural network. Experiments are conducted successfully and confirmed that the FPGA neural network hardware works well.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제7권1호
• /
• pp.46-51
• /
• 2006

We present simulation results for a method designed to extract key parameter values of DFB-type LDs based on ASE spectrum measurements. Comparisons were made between the given (actual) and the extracted (estimated) parameters, as well as the associated spectra, fur a variety of DFB-type LDs, and the two sets of results were found to be in excellent agreement.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.525-529
• /
• 2001

A pulse frequency control(PFM) method for single-phase SEPIC-type rectifier is described in this paper. In the SEPIC rectifier, a relationship between the output power and the respective switching frequency is investigated to establish the control scheme of PFM. The propsed control method is provided with a feed-forward control loop of the output load as well as a feed-back control loop of the output voltage. The simulation results show good dynamic responses and unity power-factor operation.

• Korean Journal of Microbiology
• /
• 제9권1호
• /
• pp.27-31
• /
• 1971

This experiment was carried out to research for the use of the mycelium and enzyme on the production of fermented feed. Among 354 strains isolated from natural sources, 3 strains of useful yeasts were selected and identified, and the cultural conditions of these strains were examined. The results obtained were as follows. 1) The strian No.55, No.112 and No. 340 selected were identified Endomycopsis fibuliger, Endomycopsis javanensis and Candida tropicalis, respectively. 2) The optimum pH and sugar concentration of the medium for the strain No.55, No.112 and 340 selected was around pH 6.5and Bllg.10.deg.. The optimum temperature for the growth of the strain No.55 and No.112 selected was 30.deg.C and was 25.deg.C of strain No.340. 3) The strain No.55 and No.112 were grown exceedingly well on the media containing 0.1 percent of (NH/sub 4/)/sub 2/SO/sub 4/.

• Journal of Korean Society of Water and Wastewater
• /
• 제16권6호
• /
• pp.717-725
• /
• 2002

A bench-scale submerged-type membrane filtration system (SMFS) was constructed to study a feasibility of membrane filtration for solid-liquid separation in water and wastewater treatment processes. In the case of applying the SMFS to a biological wastewater treatment process, so-called membrane bioreactor, aeration underneath membrane modules is usually employed in order to provide oxygen demand for microbial growth as well as to control membrane fouling. A study was investigated the effects of operation parameters by aeration intensity, feed concentration, foulant type and airlift pore size on critical flux. Critical flux tends to increase with aeration rate. Optimal aeration flow rate was found to be 10 L/min/module. Feed concentration and foulant type has a significant effect on membrane fouling and filtration performance. But downward position and pore size of airlift has no a significant effects on membrane fouling and filtration performance.

• Journal of the Korean Society for Precision Engineering
• /
• 제8권1호
• /
• pp.74-83
• /
• 1991

A study on the Correlation of Orthogonal Cutting Parameter (Cutting speed, Depth of cut, Feed Rate) and Acoustic Emission Signal. It is well known that acoustic emission (AE) is the emission of elastic wave resulting from the deformation and fracture of materials. This study estabished correlation of orthogonal cutting parameter and AE signal, and researched into in-process monitoring of tool wear and failure. The results are as follow; 1. AE RMS was under the influence of cutting speed but hardly influenced by depth of cut and feed rate. 2. AE RMS was under the influence of flank wear. 3. AE count rate increased by increased cutting speed. 4. AE RMS value was rapidly increased in 130 m flank wear.

• Journal of the Korean Society for Precision Engineering
• /
• 제14권8호
• /
• pp.21-28
• /
• 1997

This paper presents the influence of the process parameters on the change in dynamic behavior of a lathe turning system. With variation of feed rate, depth of cut, direction of tool motion, cutting speed and tool location along the workpiece, the dynamic characteristics of stable cutting, chatter transition and fully developed chatter regions are demonstrated. The workpiece vibration during machining is continuously measured at different tool locations along the workpiece and quantitatively analyzed. Complex linear behavior due to change of process parameter values as well as fundamental wystem nonlinearity due to change of process configuration indicated by a tool path dependence of the locations of chatter onset and disappearance are described. Finally, the structural characteristics of the turning system which can have large and nonlinear effects on system behavior are presented.

• Animal Bioscience
• /
• 제37권4_spc호
• /
• pp.742-754
• /
• 2024

Asia is not only the primary region for global pig production but also the largest consumer of pork worldwide. Although the pig production in Asia has made great progress in the past, it still is confronted with numerous challenges. These challenges include: inadequate land and feed resources, a substantial number of small-scale pig farms, escalating pressure to ensure environmental conservation, control of devastating infectious diseases, as well as coping with high temperatures and high humidity. To solve these problems, important investments of human and financial capital are required to promote large-scale production systems, exploit alternative feed resources, implement precision feeding, and focus on preventive medicine and vaccines as alternatives to antibiotics, improve pig breeding, and increase manure recycling. Implementation of these techniques and management practices will facilitate development of more environmentally-friendly and economically sustainable pig production systems in Asia, ultimately providing consumers with healthy pork products around the world.