• Journal of Korean Society on Water Environment
• /
• v.21 no.1
• /
• pp.21-28
• /
• 2005

The training and prediction modeling using an artificial neural network was implemented to predict the turbidity of treated water as well as to estimate the optimized feed concentration of polyaluminium chloride (PACl) in a water treatment plant. The parameters used in the input layers were pH, temperature, turbidity and alkalinity, while those in output layers were PACl and turbidity of treated water. Levenberg-Marquadt method of feedforward back-propagation perceptron in the neural network toolbox of MATLAB program was used in this study. Correlation coefficients of the training data with the measured data were 0.9997 for PACl and 0.6850 for turbidity and those of the testing data with measured data were 0.9140 for PACl and 0.3828 for turbidity, when four parameters at input layer, 12-12 nodes each at both the first and the second hidden layers, and two parameters(PACl and turbidity) at output layer were used. Although the predictability of PACl was improved, compared to that of the previous studies to use the only coagulant dose as output layer, turbidity in treated water could not be predicted well. Acquisition of more data through several years obtained with the advanced on-line measuring system could make the artificial neural network useful and practical in actual water treatment plants.

• Membrane and Water Treatment
• /
• v.7 no.6
• /
• pp.495-505
• /
• 2016

Mesoporous MCM-41 was deposited on an inexpensive disk shaped ceramic support through hydrothermal technique for ultrafiltration of $Fe^{3+}$ from aqueous solution. The ceramic support was fabricated using uni-axial compaction technique followed by sintering at $950^{\circ}C$. The characteristics of MCM-41 powder as well as the composite membrane were examined by X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscope (FESEM), porosity and pure water permeation test. The XRD result revealed the good crystallinity and well-resolved hexagonally arranged pore geometry of MCM-41. TGA profile of synthesized MCM-41 zeolite displayed the three different stepwise mechanisms for the removal of organic template. The formation of MCM-41 on the porous support was verified by FESEM analysis. The characterization results clearly indicated that the accumulation of MCM-41 by repeated coating on the ceramic disk directs to reduce the porosity and pore size from 47% to 23% and 1.0 to $0.173{\mu}m$, respectively. Moreover, the potential of the fabricated MCM-41 membrane was investigated by ultrafiltration of $Fe^{3+}$ from aqueous stream at various influencing parameters such as applied pressure, initial feed concentration and pH of solution. The maximum rejection 85% was obtained at applied pressure of 276 kPa and the initial feed concentration of 250 ppm at pH 2.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.9
• /
• pp.1304-1307
• /
• 2001

The laying performance of Japanese quails fed graded levels of high glucosinolate ($92.5{\mu}mole/g$) rapeseed meal (RSM) was assessed. One hundred and twenty Japanese quails aged 1 day-old were assigned at random to four dietary treatments consisting of 0, 50, 75 or 100 g/kg RSM in the diet replacing part of the soybean meal and de-oiled rice bran in a standard quail ration. 12 female representative quails from each diet were selected at random and housed in individual cages from 7-20 wk of age. The egg production, feed intake and FCR was comparable among the different dietary groups. The egg quality characteristics, organoleptic evaluation of boiled eggs as well as the haematological (haemoglobin, total erythrocyte count, total leucocyte count) and biochemical (glucose, protein, cholesterol, aspartate amino transferase, alanine amino transferase and alkaline phosphatase) constituents did not differ significantly among the groups. The gross and histopathological studies of vital organs did not reveal any appreciable changes. The feed cost was reduced by the incorporation of RSM in the diet, but only the production cost of quails fed the 75 g/kg RSM was lower in comparison to other groups. In the present study, the laying potential of Japanese quail was well-maintained up to the 100g/kg dietary level of rapeseed meal.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.1 no.2
• /
• pp.155-159
• /
• 2000

In the spring silkworm rearing period of year 1998, some nutritional aspects were studied in the Agricultural Research Station of the Komotini town in Greece, to investigate the feeding behaviour of some Bulgarian silkworm hybrids, suitable for spring rearing, during the fourth and fifth instal under the local climatic conditions. The silkworms were fed by locally cultivated Japanese Kinriu mulberry (Morus alba L.) variety leaves. Eight Bulgarian hybrids had been used, namely Vratza-53xVratza-52, Ukraine-20xVratza-53, Super 1xHessa 2, Merefa 2xVratza 35, as well as their reciprocal crosses. The studies showed out a remarkably higher feed intake and feed utilization by the hybrids Hessa 2xSuper-1, Merefa 2xVratza 35 and Vratza-52xVratza-53. The same hybrids showed an efficient food utilization by means of daily growths cocoon shell ratio and raw silk output. In terms of food to silk conversion efficiency Hessa 2xSuper-1 hybrid gave the best results. Larval stage duration for fourth and fifth instar was not affected by feed intake and utilization. All hybrids showed a good adaptation to the local environment and their feeding performance was equal to the international existing standards. All calculated parameters were found to be around the mean values of other up to date presented results and thus considered as acceptable for the needs of the local production.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1303-1308
• /
• 2008

Keeping cooling water temperature higher within the allowable range helps marine engines to run in more efficient condition especially when the engine load is low. Temperature control of jacket cooling water in outlet side of main engine has been more widely adopted to ships these days for the purpose to reduce fuel consumption rate. But If the temperature sensor for the control loop is placed at the outlet of engine, it brings more difficulties in attaining stable and desirable properties due to dead times included in pipe length and engine itself comparing to the case where the measuring point is at the inlet side of main engine. In relation with this problem, Feed-forward control could be one of realistic solutions as it reveals good properties and requires less cost for system configuration. This study suggests a forward control system which leads to improved temperature control performances to disturbance signals which could arise from variation of engine load or weather condition. Two dead times in the modelling were described, considering pipe length between the actuator and the engine as well as the thermal process inside the engine. The results of analysis were shown by simulations to confirm responses under different conditions.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.260-263
• /
• 2005

The effects of internal manifold designs the reactant feed-stream in Polymer Electrolyte Fuel Cells (PEFCs) is studied to figure out mass flow-distribution patterns over an entire fuel cell stack domain. Reactants flows are modeled either laminar or turbulent depending on regions and the open channels in the bipolar plates are simulated by porous media where permeability should be pre-determined for computational analysis. In this work, numerical models for reactant feed-stream in the PEFC manifolds are classified into two major flow patterns: Z-shape and U-shape. Several types of manifold geometries are analyzed to find the optimal manifold configurations. The effect of heat generation in PEFC on the flow distribution is also investigated applying a simplified heat transfer model in the stack level (i.e. multi-cell electrochemical power-generation unit). This modeling technique is well suited for many large scale problems and this scheme can be used not only to account for the manifold flow pattern but also to obtain information on the optimal design and operation of a PEMC system.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.10
• /
• pp.905-911
• /
• 2014

A Loss-in-Weight (LIW) feeder, a type of automated measuring device, is a continuous feeder used in many mass production industries. Due to its versatility, there have been constant demands of LIW feeders in food production supply lines as well as chemical and pharmaceutical industries. In this paper, the process of designing a LIW feeder system with better performance will be examined and compared with commercial products. This system is characterized by low pass Butterworth filter and feed forward PI control. The filter is for noise disposal caused by dynamic condition of a LIW feeder. The feed forward PI control, based on linearity feature of feeders, is adequate for stable driving of the system. At the end, a possible evaluation method of LIW system will be proposed to verify the specific achievement of this paper.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.4
• /
• pp.91-98
• /
• 2000

In this paper , presented is a method of on-line estimation of the radial immersion ratio and cutting force ratio using cutting force. When a tooth finishes sweeping, sudden drop of cutting forces occurs. These force drops are equal to the cutting forces that act on a single tooth at the swept angle of cut and can be obtained from cutting force signals in feed and crossfeed directions. The ratio of cutting forces in feed and cross-feed directions acting on the single tooth at the swept angle of cut is a function of the swept angle of cut and the ratio of radial to tangential cutting force. In the research, it is found that the ratio of radial to tangential cutting force is not affected by cutting conditions and axial rake angle. Therefore, the ratio of radial to tangential cutting force determined by just one preliminary experiment can be used regardless of the cutting conditions. Using the measured cutting forces, the radial immersion ratio is estimated along with the cutting force ratio at that immersion angle. Various experiments show that the radial immersion ratio and instantaneous ratio of the radial to tangential direction cutting force can be estimated by the proposed method very well.

• New & Renewable Energy
• /
• v.1 no.2 s.2
• /
• pp.41-52
• /
• 2005

The effects of internal manifold designs on the reactants feed-stream in Polymer Electrolyte Fuel Cells [PEFCs] is studied to figure out flow and thermal distribution patterns over an entire fuel cell stack. Reactants flows are modeled either laminar of turbulent depending on regions and the open channels in the bipolar plates are simulated by porous media where permeability should be pre-deter-mined for computational analysis. In this work, numerical models for reactants feed-stream In the PEFC manifolds are classified Into two major flow patterns: Z-shape and U-shape. Several types of manifold geometries are analyzed to find the optimal manifold configurations. The effect of heat generation in PEFC on the flow distribution is also Investigated applying a simplified heat transfer model in the stack level (i.e. multi-cell electrochemical power-generation unit). This modeling technique Is well suited for many large scale problems and this scheme can be used not only to account for the manifold flow pattern but also to obtain Information on the optimal design and operation of PEFC systems.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.9
• /
• pp.1353-1362
• /
• 2005

The stressful physiological and environmental conditions around weaning often promote the proliferation of pathogens in the digestive tract of piglets resulting in diarrhoea and reduced daily weight gain. Typical dietary practices to maintain growth performance and health have led to an increased use of antimicrobial growth promoters. Due to the advanced ban of antibiotics in pig production, new concepts have been developed to secure animal health and growth performance, feed efficiency, and product quality as well. Several naturally occurring compounds seem to beneficially affect the composition and activity of the microflora in the gastrointestinal tract (GIT) of pigs. These are, among others, organic acids, probiotics, prebiotics, and enzymes. Organic acids are already widely used, especially in pigs, due to their positive effects on GIT health and growth performance. Probiotics have been shown to be effective against diarrhoea though effects may be dependent on diet composition and environmental conditions. Prebiotics may influence composition and activity of the intestinal microflora. Additionally, pre- and probiotics may exert positive influences on immune response, whereas enzymes may enhance feed digestibility by breaking down anti-nutritional factors. In the following, the focus will be directed to the role of organic acids, probiotics, prebiotics, and feeding enzymes as potential modulators of GIT health.