• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.6
• /
• pp.513-520
• /
• 1991

The objective of experiment was to investigate the effects of seeding rate on forage yield and feed value, and to clarify the optimum seeding rate of rye in middle west area when cultured in paddy field. The field experiment treated with 5 levels of seeding rate was carried out at Yesan area in 1989. The plant height and the number of tillers per m' were increased but the dry matter rate was decreased as seeding rate increased. The fresh and dry weights of rye plant were increased as seeding rate increased. The highest yield was obtained from the harvest of May 15 and 25 in Yesan area. The TDN content and RFV were decreased by the increased seeding rate and delayed cutting date. The highest TDN yield was obtained from the seeding rate of 18kg/l0a and the next highest yield was obtained from the 23kg and 28kg/l0a seeding rate. The content of ENE, NEL, NEM, and NEG was decreased by the increased seeding rate and delayed cutting date. The highest ENE and NEL yields were obtained from the seeding rate of 23kg/l0a and May 15 harvest. The highest NEM and NEG yields were obtained from the seeding rates of 18kg/l0a and May 15 harvest, and of 18-28kg/l0a and May 5 harvest, respectively.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.256-262
• /
• 2014

Cycle length of domestic nuclear power plants is determined by the demand-supply plan of utility company. The target cycle length is achieved by adjusting the number of feed fuel assembly and fuel enrichment. Traditionally, utility company first select the number of feed fuel assembly and then find out the fuel enrichment to achieve the special cycle length. But it is difficult to find out if this method is most economical than any other combinations of the enrichment and batch size satisfying the same cycle length. In this paper, core depletion calculation is performed to find out the optimum combination of the enrichment and batch size for given target cycle length in terms of fuel cycle cost using commercial core design code; CASMO/MASTER code. To minimize the uncertainty resulting from transition core analysis, levelized fuel cycle cost analysis was applied to the equilibrium cycle core in order to determine the optimum combination. The sensitivity study of discount rate was also carried out to analyze the levelized fuel cycle cost applicable to countries with different discount rates. From the levelized fuel cycle cost analysis results, the combination with smaller batch size and higher fuel enrichment becomes more economical as the discount rate becomes lower. On the other hand, the combination with higher batch size and lower fuel enrichment becomes more economical as the discount rate becomes higher.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.6
• /
• pp.804-811
• /
• 2013

The effects and significance of ${\gamma}$-amino butyric acid (GABA) producing bacteria (GPB) on in vitro rumen fermentation and reduction of biogenic amines (histamine, methylamine, ethylamine, and tyramine) using corn meal as a substrate were determined. Ruminal samples collected from ruminally fistulated Holstein cows served as inoculum and corn was used as substrate at 2% dry matter (DM). Different inclusion rates of GPB and GABA were evaluated. After incubation, addition of GPB had no significant effect on in vitro fermentation pH and total gas production, but significantly increased the ammonia nitrogen ($NH_3$-N) concentration and reduced the total biogenic amines production (p<0.05). Furthermore, antioxidation activity was improved as indicated by the significantly higher concentration of superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px) among treated samples when compared to the control (p<0.05). Additionally, 0.2% GPB was established as the optimum inclusion level. Taken together, these results suggest the potential of utilizing GPB as feed additives to improve growth performance in ruminants by reducing biogenic amines and increasing anti-oxidation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.11
• /
• pp.1642-1650
• /
• 2008

The objective of this study was to assess the effect of clinoptilolite (a natural zeolite) on growth and performance of broilers as well as on the quality of their litter. A total of 5,200 one-day old broiler chickens (Cobb 500) were used in two consecutive rounds lasting 42 days each. The broilers were given free and continuous access to a nutritionally non-limiting diet (in meal form) that was either a basal diet (B) or a 'zeolite diet' (Z; the basal diet supplemented with clinoptilolite at a level of 2%). A $2{\times}2$ factorial design consisted of two feeding treatments (B and Z) and two bedding types, sawdust (S) and sawdust with zeolite (Sz, which was the result of adding $2kg\;zeolite/m^2$), was used. In each round the broilers were randomly assigned to one of four (n = 650), treatment groups: two fed on the basal diet (B) and had bedding of either sawdust (group BS) or sawdust and zeolite (group BSz) and two fed on the Z diet and had as bedding either sawdust (ZS) or sawdust and zeolite (ZSz). Average growth rates were significantly (p<0.05) different between broilers of different groups; broilers that were fed on the 'zeolite diet' (Z) and were placed either in a compartment with sawdust bedding or sawdust bedding and zeolite (ZS and ZSz) as well those that were fed on the basal diet in a compartment with sawdust bedding and zeolite (BSz) grew at a faster rate (p<0.05) compared with those of the control group (BS). The incorporation of NZ in broilers diets and in their bedding material decreased the organic content in litter samples throughout the experimental period. The lowest organic content was recorded in group ZSz where NZ was added in both feed and litter. Mean ammonia concentration (ppm) was significantly higher in group ZS in comparison to groups BSz and ZSz (27.00 vs. 20.55 and 21.71 respectively). The results of this study showed that the incorporation of the clinoptilolite both in feed and into the litter had a positive effect on broiler growth and also on the quality of their litter.

• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.1
• /
• pp.6-13
• /
• 2012

HVOF thermal spray coating of 80%WC-CoFe powder is one of the most promising candidate for the replacement of the traditional hard chrome plating and hard ceramics coating because of the environmental problem of the very toxic $Cr^{6+}$ known as carcinogen by chrome plating and the brittleness of ceramics coatings. 80%WC-CoFe powder was coated by HVOF thermal spraying for the study of durability improvement of the high speed spindle such as air bearing spindle. The coating procedure was designed by the Taguchi program, including 4 parameters of hydrogen and oxygen flow rates, powder feed rate and spray distance. The surface properties of the 80%WC-CoFe powder coating were investigated roughness, hardness and porosity. The optimal condition for thermal spray has been ensured by the relationship between the spary parameters and the hardness of the coatings. The optimal coating process obtained by Taguchi program is the process of oxygen flow rate 34 FRM, hydrogen flow rate 57 FRM, powder feed rate 35 g/min and spray distance 8 inch. The coating cross-sectional structure was observed scanning electron microscope before chemical etching. Estimation of coating porosity was performed using metallugical image analysis. The Friction and wear behaviors of HVOF WC-CoFe coating prepared by OCP are investigated by reciprocating sliding wear test at $25^{\circ}C$ and $450^{\circ}C$. Friction coefficients (FC) of coating decreases as sliding surface temperature increases from $25^{\circ}C$ to $450^{\circ}C$.

• Journal of Biosystems Engineering
• /
• v.38 no.2
• /
• pp.95-102
• /
• 2013

Purpose: Using a laboratory indented cylinder separator, broken rice separation experiments were conducted and the characteristics of the separation process were studied to provide information for developing a prototype indented cylinder broken rice separator. Methods: Rice (Ilmi variety) milled in a local RPC was used for the experiment. Rice kernels were classified into four groups according to their length l; whole kernels (I > 3.75 mm), semi-whole kernels (2.5 < I < 3.75 mm), broken kernels (1.75 < I < 2.5 mm), and foreign matters (I < 1.75 mm). A laboratory grain cleaner, Labofix '90 (Schmidt AG, Germany) was used for the experiments. Experiments were designed as a $4{\times}4$ factorial arrangement in randomized blocks with three replications. Cylinder rotational speeds (17, 34, 51, 68 rpm) and trough angles (15, 37.5, 60, $82.5^{\circ}$) were the two factors and feed rates (25, 50 kg/h), indent shapes (Us, $S_1$ type), and indent sizes (2.5, 3.75 mm) were treated as the blocks. Two 125 g samples and one 125 g sample were taken at the cylinder outlet and from the trough, respectively. The whole, semi-whole, and broken kernel weight ratio of the samples and feed was determined by a rice sizing device. From these weight ratios, purities, degrees of extraction and coefficient of separation efficiency were calculated. Results: Trough angle, cylinder speed, and their interaction on the coefficient of separation efficiency were statistically significant. Cylinder speed of 17, 34, and 51 rpm made the most effective separation when the trough angle was $15^{\circ}$ or $37.5^{\circ}$, $60^{\circ}$, and $82.5^{\circ}$, respectively. Maximum values of coefficient of separation efficiency were in the range of 60 to 70% except when the indent size was 2.5 mm and were recorded for the combinations of low cylinder speed (17 rpm) with medium trough angle ($37.5^{\circ}$ or $60^{\circ}$). Indent shape did not appear to make any noticeable difference in separation efficiency. Conclusions: Due to the interaction effect, the trough angle needs to be increased appropriately when an increase in cylinder speed is made if a rapid drop of effectiveness of separation should be avoided. In commercial applications, $S_1$ type indents are preferred because of their better manufacturability and easier maintenance. For successful separation of broken kernels, the indent size should be set slightly bigger than the actual sizes of broken kernels: an indent size of 3.0 mm for separating broken kernels shorter than 2.5 mm.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.101-104
• /
• 2003

In this study based on the mass transfer theory, experiments for the evaporation rates depending on various conditions were carried out through the operation of the existing Natural Evaporation Facility in KAERI. Evaporation media were made of the cotton and polyester. Air circulation in the facility was forced by exhausting fans. The evaporation rate and the decontamination factor were calculated by the result of experiment. The evaporation rate increased as the flow rate of air supply, the feed rate of liquid waste, and the temperature of supplied air increased. As for the humidity of supplied air, the evaporation rate was getting higher as the humidity was getting lower. As the result of this study, operation conditions of the Natural Evaporation Facility are optimized as follows : The air temperature above $8^{\circ}C$, the air humidity below 70%, the air flow rate 1.14-1.47 m/sec, and the liquid waste feed rate $4.6{\ell}/hr\cdotm^2$. The decontamination factor and the radioactivity are $5.1{\times}10^3$and $4.7{\times}10^{-13}{\mu}Ci/\textrm{m}{\ell}$ respectively, at the above mentioned optimum operation conditions. The air factor in the Dalton's equation for evaporation was determined from results of experiment on the temperature, the humidity, and the flow rate of supplied air as following : $[\textit{Eh}=(0.018 + 0.0141\textitv) {\delta}textitH]$

• Journal of Energy Engineering
• /
• v.16 no.1 s.49
• /
• pp.32-39
• /
• 2007

Coal pyrolysis processes vary with the origin and rank of coal. It is difficult to generalize the characteristics of coal pyrolysis reaction because the process consists of numerous reactions including pyrolysis, gasification, and combustion. To find out the optimum process condition it is necessary to determine the condition fur each coal from the smatter scale experiment. In this study pressurized ($2kg_{f}/cm^{2}$) fluidized bed, low temperature ($735{\sim}831^{\circ}C$) gasification using Kideco coal was performed. The reaction condition and product gas composition were determined from the variables including steam flow rate, coal feed rate and air flow rate. Optimum reaction condition was determined from the concentrations of $H_{2}$, and CO in the product gas. The ratio of air/coal was 4.45 and that of steam/coal was 0.21 respectively. The concentrations of CO and $H_{2}$ decreased with the increase of $CO_{2}$. It is important to control the feed rates of coal and steam because the reaction temperature rapidly increased when the combustion reaction dominates over the gasification reaction. The concentrations of CO and $H_{2}$ were 18%, 17% respectively from the continuous operating condition.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.469-474
• /
• 2000

This study was conducted to investigate the utilization of defatted soybean meal as a substitute for fish meal in the diet for juvenile flounder (Paralichthys olivaceus). Duplicate groups of average weighing 35 g were fed one of four isonitrogenous ($54{\%}$) and isocaloric (575 kcal/100 g diet) diets containing $0{\%}, 10{\%}, 20{\%} and 30{\%}$ soybean meal for 45 days. Survival rates of all groups were $100{\%}$, Weight gain of fish decreased with increasing dietary soybean meal levels, However, this value was not significantly different between fish fed the control and $10{\%}$ soybean meal diet (P > 0.05). Feed efficiency and protein efficiency ratio decreased with increasing dietary soybean meal levels, but no significant differences were found among fish fed the control, $10{\%}\;and\;20{\%}$ soybean meal diets (P > 0.05). Daily feed and protein intake increased with increasing dietary soybean meal level. Crude protein and moisture content of liver tended to decrease and crude lipid content tended to increase with decreasing of dietary soybean meal levels. Plasma total cholesterol levels of fish fed the diets containing $20{\%}\;and\;30{\%}$ soybean meal were significantly lower than that of fish fed control diet (P < 0.05), Plasma GOT level significantly increased with increasing dietary soybean meal level (P < 0.05). It is concluded that soybean meal can be used as a partial substitute for fish meal up to $10{\%}$ in this dietary formulation for growth of juvenile flounder.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.6
• /
• pp.577-583
• /
• 2011

In 2007, pet food contaminated with melamine caused hundreds of dogs and cats to develop renal failure all over the world. In 2008, over 294,000 infants consumed infant formula and developed kidney stones in China. Further investigation revealed that fish feed also contained melamine; this raised concerns about melamine residues in edible fish tissues, which could have caused the urinary tract stone epidemic. In Korea, catfish fed with assorted feed that included cuttlefish organs that contained melamine developed whitening syndrome and fell dead in some populations in 2008. This event raised suspicions about the toxicity of melamine and all feeds containing melamine were immediately recalled. In this study, we investigated the rates of melamine accumulation and depletion in muscle and viscera of catfish to propose proper withdrawal periods. One group of catfish was fed a commercially available diet that contained 30, 100 and 300 mg melamine per kg diet for 14 days. To investigate residual melamine contents in muscle and viscera, other experimental groups were fed a melamine free diet after being fed melamine for 7 days. The residual amount of melamine was analyzed by LC-MS/MS. The melamine concentration in muscle was estimated to be 3.7 mg/kg after 6 days of feeding with a diet containing 300 mg melamine/kg. After 2 days of culture with a melamine free diet, the residual melamine was depleted and the concentration had decreased from 1.15 mg/kg to 0.19 mg/kg in the muscle of catfish fed a diet containing 300 mg melamine/kg for 7 days. The residual amount of melamine was reduced to 0.03 mg/kg in muscle after 7 days of culture with a melamine free diet and was undetectable after a prolonged culture period of 14 days. Catfish tend to excrete melamine rapidly after oral administration and changes in body color were not observed during the short dosing period.