• Korean Chemical Engineering Research
• /
• v.43 no.2
• /
• pp.286-293
• /
• 2005

An interpretation on the solid circulation characteristics in a fluidized-bed process has been carried out as a first step to simulate the dry entrained-bed absorption and bubbling-bed regeneration system for $CO_2$ removal from flue gas. A particle population balance has been developed to determine the solid flow rates and particle size distributions in the process. Effects of principal process parameters have been discussed in a laboratory scale process (absorption column: 25 mm i.d., 6 m in height; regeneration column: 0.1 m i.d., 1.2 m in height). The particle size distributions in absorption and regeneration columns were nearly the same. As gas velocity or static bed height in the absorption column increased, soild circulation rate and feed rate of fresh sorbent increased, however, mean particle diameter decreased in the absorption column. As cut diameter of the cyclone of the absorption column increased, solid circulation rate decreased, whereas feed rate of fresh sorbent and mean particle diameter in the absorption column increased. As attrition coefficient of sorbent particle increased, solid circulation rate and feed rate of fresh sorbent increased but mean particle diameter in the absorption column decreased.

• Journal of Food Hygiene and Safety
• /
• v.21 no.4
• /
• pp.244-249
• /
• 2006

The residue depletion of amoxicillin was investigated in the olive flounder (Paralichthys olivaceus), rockfish (Sebastes schlegeli), and red sea bream (Pagrus major) after 7 days treatment with medicated feed at a dose of 400 mg/kg bw/day. Fishes were sampled for muscle on 1st, 2nd, 3rd, 4th, and 5th day after treatment. Amoxicillin concentrations were determined by high performance liquid chromatography with fluorescence detector. The recovery rates of amoxicillin in muscle samples ranged 84.3-101.3% and 75.0-91.5% for the concentration of 0.05 mg/kg and 0.1 mg/kg, respectively. Amoxicillin concentrations detected on 1st day after treatment were 0.137, 0.131, and 0.172 mg/kg in the muscle of olive flounder, rockfish, and red sea bream, respectively. After a withdrawal of 3 days, muscle concentrations were 0.012, 0.010, and 0.017 mg/kg in the olive flounder, rockfish, and red sea bream, respectively. Amoxicillin was not detectable in muscle samples on 4 days following withdrawal of the medicated feed. From results of the present study, a withdrawal period of amoxicillin is proposed on 4 days after 7 days treatment with medicated feed at a dose of 400 mg/kg bw/day to avoid the presence of excessive residues of the edible muscles of olive flounder, rockfish, and red sea bream.

• Journal of fish pathology
• /
• v.36 no.2
• /
• pp.323-336
• /
• 2023

This study was conducted to find out the effect of yeast by-products discarded after beer production as feed additives for carp (Cyprinus carpio). After producing feed by adding high-temperature dried beer yeast by-products (HD), freeze-dried beer yeast by-products (FD), and freeze-dried fermented beer yeast by-products (FF) after lactobacilli fermentation, innate immunity indicators, survival rates, and challenge experiments were evaluated. Both ACH50 and lysozyme activity were significantly increased (p<0.05) in the experimental group of FF 0.2% and 0.5% compared to the control group from day 7 to day 21. In addition, phagocyte activity was significantly increased (p<0.05) in the group of FF 0.5% compared to the control group at all time points. Both IL-1β and TNF-α expression levels increased significantly in the FD and FF groups on day 21 compared to the control group (p<0.05). In addition, the FF 0.5% group showed significantly higher expression levels (p<0.05) at all time points. Similarly, IL-10 expression increased significantly (p<0.05) in FF 0.2% and 0.5% groups at all time points. SOD gene expression was significantly increased in FD 0.5% and all FF groups on day 14 and 21 (p<0.05). The results of a 10-day challenge experiment using Edwardsiella piscicida (E. piscicida) showed a higher relative survival rate than the control group at all concentrations that fed FD and FF. In summary, it is estimated that 0.5% FF can effectively improve the innate immunity, growth rate, and antibacterial properties of carp rather than using discarded beer yeast supernatant alone as a functional feed additive.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.5
• /
• pp.708-714
• /
• 1999

Fermentation of legume fodder tree leaves by rumen microorganisms was evaluated. The substrates were sun-dried, ground leaves. Gas and volatile fatty acid (VFAs) production were estimated. Using gas production as an index of fermentation at 12 h, the leaves tested ranked as follows; Chamaecytisus palmensis>Gliricidia sepium>Sebania sesban>Tephrosia bracteolate>Leucaena pallida>Vernonia amygdalina>Acacia sieberiana>Sesbania goetzei>Acacia angustissima. Using VFA production, the ranking was a follows; G. sepium>S. sesban>S. goetzei>L. pallida>C. palmensis/V. amygdalina>T. bracteolate> A. sieberiana>A. angustissima. Absolute gas or VFA production rates, were also used to rank the leaves. Extracts (70% acetone) of A. angustissima inhibited the growth of Ruminococcus albus 8, R. flavefaciens FD-1, Prevotella ruminicola D3ID and Streptococcus bovis JBI while the trowth of Selenomonas ruminantium D was depressed when 0.6 ml exracts were added. C. palmensis water extracts enhanced cellulose hydrolysis by R. flavefaciens FD-1. All extracts reduced celluloysis by R. albus 8. R. flavefaciens FD-1 hydrolyzed more (p<0.001) cellulose than R. albus 8.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.4
• /
• pp.699-707
• /
• 1992

Three goats were fed with $^{15}N$-labelled rice straw to study the characteristics of digestion, assimilation, metabolism and excretion of C and N compounds from rice straw. It was shown that the amount of $^{15}N$ assimilated into the bodies of the two slaughtered goats accounted for 38.5 and 23.6% of the total amount of $^{15}N$ ingestion in the experimental diet by each goat. The $^{15}N$ excreted via the feces and urine for the three goats accounted for 34.8, 33.2 and 33.9% of the total amount of $^{15}N$ ingested in the feed of the 3 goats. The recoveries of $^{15}N$ from the two slaughtered goats were 73.3 and 57.5%, with the corresponding rates of $^{15}N$ loss 26.7 and 42.5% respectively. The amino acids digestibilities were 68.7 and 54.0%, while the digestibilities of carbohydrates were 74.8 and 67.7% respectively for goats 1 and 3.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.623-627
• /
• 2011

Simulated moving bed(SMB) chromatography was simulated for separating loxoprofen racemates. Aspen chromatography simulator was utilized with Henry's constants of loxoprofen racemates which were obtained by batch chromatography experiments. Raffinate stream concentrations as well as purities were calculated with various $m_2$ and $m_3$ values in the triangle diagram obtained from two Henry's constants 7.9 and 10.1. Purity values are high under the conditions that the $m_2-m^3$ coordinates are near the left central region in the diagram and feed flow rates are lower. Concentration profiles of raffinate and extract streams along SMB columns explain the purity change in the case of increasing the column numbers installed at SMB.

• The Korean Journal of Ecology
• /
• v.25 no.5
• /
• pp.275-282
• /
• 2002

Preference of food plants of wild birds was shown in the order of Pinus densiflora, Celtis sinensis, Celastrus orbiculatus, Rosa multiflora, Taxus cuspidata, and Euonymus japonica, etc. The wild birds preferred the animal food(92.2%) rather than the vegetable food(32.7%) in breeding season(May through June), but preferred both animal and vegetable foods in non-breeding season(November through December). The rates utilzing artficial nest were 77.5%, 50.3%, 44.1% and 42.2% in Nosan, Sanho, Chinju-castle and Bibong parks, respectively. The wild birds used more the 3cm hole than 5cm hole.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.2
• /
• pp.224-234
• /
• 2013

This study investigates the fabrication of core-sheath nanocomposite fibers by locating germanium (Ge) and silicon dioxide ($SiO_2$) nanoparticles selectively in the sheath layer by co-axial electrospinning. Co-axially spun fibers were prepared by electrospinning a pure PVA solution and Ge/$SiO_2$/PVA solution as the core and sheath layer, respectively. Core-sheath nanocomposite fibers were electrospun under a variety of conditions that include various feed rates for the core and sheath solutions, voltages, and concentric needle diameters, in order to find an optimum spinning condition. Ge/$SiO_2$ nanocomposite fibers were also prepared by uniaxial electrospinning to compare fiber morphology and nanoparticle distribution with core-sheath nanofibers. Using scanning electron microscopy, transmission electron microscopy, and energy dispersive X-ray analysis, it was demonstrated that the co-axial approach resulted in the presence of nanoparticles near the surface region of the fibers compared to the overall distribution obtained for uni-axial fibers. The co-axially electrospun Ge/$SiO_2$/PVA nanofiber webs have possible uses in high efficiency functional textiles in which the nanoparticles located in the sheath region provide enhanced functionality.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.48-51
• /
• 2004

The estimation of NC machining time is of significance since it provides shop floor engineers with information for the determination of the productivity of the floor as well as process schedules. The NC machining time commonly depends on NC programs since they have various important information such as tool positions, feed rates, and other miscellaneous functions. Thus, nominal NC machining time can be easily acquired based on the programs. Actual machining time, however, cannot be simply obtained because of the dynamic characteristics of a NC machine controller such as acceleration and deceleration. Hence, this study presents a NC machine time estimation model for sculptured surfaces, considering the dynamic characteristics. The estimation model uses the distribution of NC blocks according to a factor influencing the machining time. Finally, machining time is estimated by a statistical machining time estimation model representing the relationship between the block distribution and the machining time. The parameters in the model are searched out by a genetic algorithm.

• Korean Journal of Poultry Science
• /
• v.21 no.2
• /
• pp.73-82
• /
• 1994

A study was conducted to develop a new analytical method to quantitate chicken dietary fiber (CDF). Four types of grain diets and 2 types of forages were used. Three broiler chicks at eight weeks of age were used in the Latin square design to estirnate the in vivo digestibility. Six quantitative analytical methods (Southgate method, total dietary fiber or TDF, acid detergent fiber or ADF, neutral detergent fiber or NDF, crude fiber or CF) including CDF were compared in this study. ADF, NDF and CF contained the lowest amount of the unavailable carbohydrate(UC). The value of TDF was higher than the values of ADF, NDF and CF and lower than CDF and the Southgate method. The value of NDF showed the lower values than the CDF, Southgate fiber and TDF. The recovery rate of the fiber in the feces was high in the TDF, ADF, NDF and CF, while CDF and Southgate fiber showed lower recovery rates. TDF, NDF, ADF, or CF can replace chromium in the digestibility test, while the CDF and Southgate fiber can not replace chrorniurn. The digestibility of TDF, NDF, ADF and CF in the chicken showed negative values or values close to zero depending on the types of feed but the digestibility of CDF and Southgate fiber showed relatively high positive values.