• Asian-Australasian Journal of Animal Sciences
• /
• 제24권6호
• /
• pp.791-799
• /
• 2011

This study examined the effect of restricting feed intake and the subsequent compensatory growth in Guzera females. Eighteen animals with an initial age of 21 months and a mean weight of 268.17 kg were placed in three groups according to the alimentary regime: feed ad libitum; feed restricted to 20% dry matter; and feed restricted to 40% dry matter. In the restricted feed phase, the dry mater intake decreased as the restriction levels increased, influencing the reduction in intake of other nutrients. In the realimentation phase, the 40% restricted feed group ingested more dry matter (% BW) and crude protein ($weight^{0.75}$) than the group fed ad libitum (p<0.001). The serum nutrient concentrations were inversely proportional (p<0.001) to the restriction level, and there was no difference (p>0.001) in the realimentation phase. In the restricted feed phase, the final live weight decreased (p<0.05) as the restriction level increased. For the daily mean weight gain in the control group, there was no difference (p>0.05) compared to the animals with 20% feed restriction, but this was higher than in the group with 40% feed restriction. In the re-alimentation phase, the group with 40% feed restriction achieved higher weight gain rates, which was different from the control and 20% restriction groups. In both phases, the animals in the group with 40% feed restriction presented better feed conversion which was different (p<0.05) from the control group. In the feed restriction phase, it was observed that the intake of N, nitrogen excreted in feces and urine, nitrogen balance and nitrogen retention decreased (p<0.05) with the restriction level. None of the variables were influenced in the re-alimentation phase. These results show that feed restriction by 40% can be adopted as a nutritional management practice.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권9호
• /
• pp.1334-1340
• /
• 2002

A 4 week experiment was designed to study the effects of replacing corn with Chinese brown rice or adding different amylase in brown rice basal diet on growth performance and apparent fecal digestibilities of nutrients in growing pigs. One hundred and eight cross-bred pigs (Duroc${\times}$Landrace${\times}$Large White), weighing an average of $18.35{\pm}0.12kg$, were randomly assigned to 6 treatments with 6 replications per treatment. Diet in treatment 1 was corn-soybean meal basal diet, and in treatment 2, 3 and 4, corn was replaced by brown rice on rates of 33.3%, 66.7% and 100% respectively on the basis of treatment 1. And diets in treatment 5 and 6 were similar to treatment 4 except two kinds of amylases, glucoamylase and ${\alpha}$-amylase, were added respectively. The brown rice used in this experiment was husked from one kind of early, long grain, non-glutinous rice (ELGNR, indica rice) in southern China. The results indicated that there was a slight improvement in growth performance of pigs in brown rice treatments (p>0.05). The blood urea nitrogen value in treatment 2 was lower than that in treatment 1 (p<0.05). The differences of apparent fecal digestibilities of most nutrients were significant (p<0.05) except CP. Digestibilities of GE, OM and DM in treatment 4 were the best and digestibility of crude fat in treatment 5 appeared best (p<0.05). Contrast results between treatment 1 and treatment 2 to 4 indicated that the digestibility of GE, OM and DM increased significantly with the replacing rates of brown rice (p<0.05). Contrast results between treatment 4 and 5 indicated that adding glucoamylase in brown rice diet increased growth performance slightly (p>0.05) but not for digestibilities. This experiment shows a positive effect of brown rice on growth performance, especially on nutrient digestibility.

• Asian-Australasian Journal of Animal Sciences
• /
• 제2권1호
• /
• pp.1-6
• /
• 1989

Nutritive values and fermentation rates of rice straw treated with 3% anhydrous and 3% aqueous ammonia were evaluated both in vitro and sheep metabolism trials. Daily gain, feed efficiency and feed cost per gain were also determined with growing Holstein bulls fed anhydrous and aqueous ammonia treated rice straw. Crude protein was increased 2.4 fold and NDF was decreased 6.5%, but ADF and cellulose were not different between untreated and ammonia treated rice straw. An average of 35.5% of total added ammonia-N retained in the rice straw and other 64.5% was not retained in the rice straw. Ammonia treatment increased in vitro DM, NDF, ADF and cellulose digestibilities by 44.8%, 43.3%, 49.4% and 42.4%, respectively, and fermentation rates by 63.3%, 132.4%, 49.4% and 42.4%, respectively. In sheep metabolism trials, DM digestibilities of rice straw treated with anhydrous and aqueous ammonia were increased 22% and 36%, respectively, and digestible DM intakes by 48% and 70%, respectively in sheep fed anhydrous and aqueous ammonia treated rice straw over untreated rice straw. Rumen ammonia and blood urea were considerably higher in sheep fed ammonia treated rice straw than sheep fed untreated rice straw. Daily gain of Holstein bulls was increased 20.8% and 29.9% and rice straw intakes were increased 28.4% and 44.3% in anhydrous and aqueous ammonia treated rice straw over untreated rice straw. Feed conversion was improved 9.5% and 10.3% and feed cost/gain was reduced 7.1% and 9.2% respectively in anhydrous and aqueous ammonia treated rice straw group as compared with untreated rice straw group.

• Journal of Biosystems Engineering
• /
• 제12권4호
• /
• pp.31-43
• /
• 1987

This study was performed to develop a hot water boiler system with small scale automatic rice hull furnace for the multi-purpose use in the farm. For the experiment a prototype hot water boiler system with rice hull furnace was fabricated, which was equipped with automatic hull feeder, igniter and ash removal device. Optimum operational conditions of the prototype: system were analyzed. The results arc summarized as follows. 1. The temperature measured right above the burning surface should be higher than $500^{\circ}C$ combustion. 2. The top zone of the combustion chamber was the most suitable location of the thermocouple to pick up the control temperature for the automatic operation of the rice hull furnace. 3. The content of carbon monoxide in the flue gas was increased with the filling height of burning material but it was less than 0.3 percent in volume in this experiment. When the filling height was expressed as the ratio of rice hull feed rate to the volume of the combustion chamber above the burning surface, the optimum ratio was about $150kg/m^3-h$. 4. The combustion efficiency of the prototype was higher than 95 percent when the feed rate was 1.1 to 2.3 kg/h and moisture content of rice hull was 22.4 percent (w.b.) or less. 5. It was estimated that the optimum operational conditions of the system were 1.3 to 2.0 kg/h in feed rate, 70 to 100 percent in excess air and 500 to $510^{\circ}C$ in control temperature. 6. The efficiency of coil heal exchanger increased with a decrease in feed rate of rice hull. When the rice hull feed rates were 1.1, 1.7 and 2.3 kg/h, the efficiencies of coil heat exchanger were about 34, 30 and 25 percent and heat transfer rates were 5.7, 7.6 and 8.8 MJ/h, respectively. When the flat plate heat exchanger was used in addition to the coil heat exchanger, the efficiency of the heat exchanger system increased to 48 percent.

• Fisheries and Aquatic Sciences
• /
• 제20권5호
• /
• pp.7.1-7.6
• /
• 2017

A feeding trial was designed to assess the effects of dietary protein and lipid content on growth, feed utilization efficiency, and muscle proximate composition of juvenile mandarin fish, Siniperca scherzeri. Six experimental diets were formulated with a combination of three protein (35, 45, and 55%) and two dietary lipid levels (7 and 14%). Each diet was fed to triplicate groups of fish ($8.3{\pm}0.1g$) to apparent satiation for 8 weeks. The results showed that growth performance in terms of weight gain (WG) and specific growth rate (SGR) increased with increasing dietary protein level from 35 to 55% at the same dietary lipid level. At the same dietary lipid content, WG and SGR obtained with diets containing 55% protein was significantly higher than those obtained with diets containing 45 and 35% protein. No significant effect on growth rate was found when the dietary level of lipid was increased from 7 to 14%. While the levels of protein and lipid in the diets had no significant effect on feed intake, other nutrient utilization efficiency parameters including daily protein intake (DPI), feed efficiency (FE), and protein efficiency ratio (PER) showed a similar trend to that of growth rates, with the highest values obtained with diets containing 55% protein. Muscle chemical composition was not significantly affected by the different dietary treatments for each dietary lipid or protein level tested. These findings may suggest that a practical diet containing 55% protein and 7% lipid provides sufficient nutrient and energy to support the acceptable growth rates and nutrient utilization of mandarin fish juveniles.

• ALGAE
• /
• 제28권4호
• /
• pp.343-354
• /
• 2013

To explore the interactions between the mixotrophic dinoflagellate Biecheleria cincta (previously Woloszynskia cincta) and heterotrophic protists, we investigated whether the common heterotrophic dinoflagellates Gyrodinium dominans, Gyrodinium moestrupii, Gyrodinium spirale, Oxyrrhis marina, and Polykrikos kofoidii, and the ciliate Strobilidium sp. were able to feed on B. cincta. We also measured growth and ingestion rates of O. marina and Strobilidium sp. on B. cincta as a function of prey concentration. In addition, these rates were measured for other predators at single prey concentrations at which the growth and ingestion rates of O. marina and Strobilidium sp. were saturated. All grazers tested in the present study were able to feed on B. cincta. B. cincta clearly supported positive growth of O. marina, G. dominans, and Strobilidium sp., but it did not support that of G. moestrupii, G. spirale, and P. kofoidii. The maximum growth rates of Strobilidium sp. and O. marina on B. cincta (0.91 and 0.49 $d^{-1}$, respectively) were much higher than that of G. dominans (0.07 $d^{-1}$). With increasing the mean prey concentration, the specific growth rates of O. marina and Strobilidium sp. on B. cincta increased, but either became saturated or slowly increased. The maximum ingestion rate of Strobilidium sp. (1.60 ng C $predator^{-1}\;d^{-1}$) was much higher than that of P. kofoidii and O. marina (0.55 and 0.34 ng C $predator^{-1}\;d^{-1}$) on B. cincta. The results of the present study suggest that O. marina and Strobilidium sp. are effective protistan grazers of B. cincta.

• 미생물학회지
• /
• 제16권1호
• /
• pp.21-29
• /
• 1978

In the fed-batch fermentation of penicillin specific uptake rates of carbon source and ammonia nitrogen, and specific production rate of penicillin as the most important process variables were evaluated over the fermentation course and their effects on the productivity studied. As the results, glucose and lactose each as a major carbon source showed the following values, respectively ; the specific uptake rates of 47-93 mg hexose per gm-DCW per he and 37-44 mg hexose per gm-DCW per hr, the specific uptake rates of 4.6-6.8 mg $NH_3-N$ per gm-DCW per hr, and 1.2 mg $NH_3-N$ per gm-DCW per he and the specific production rates of 32-42 arbitrary unit per gm-DCW per hr and 46-50 arbitrary unit per gm-DCW per hr. The productivity of penicillin could be improved by controlling the feed rates of glucose and ammonia nitrogen to meet the uptake rates.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권4호
• /
• pp.341-345
• /
• 2005

Since it is troublesome to estimate adequate flow rates in four sections of SMB chromatography, a systematic determination of the flow rates has been suggested by using ketoprofen as a model chiral enantiomer. S-ketoprofen. less retained species, was separated from raffinate stream and the variation in its purity was dependent on the changes of the flow rate of section 4 ($Q_4$), the raffinate flow rate ($Q_{raf}$), and the feed flow rate ($Q_{feed}$) under a fixed switch­ing time t$^{\ast}$. When one parameter was changed at the given experimental condition, purities of product were changed and these phenomena has be well explained by the triangle theory.