• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.7
• /
• pp.931-936
• /
• 2010

This experiment was conducted to evaluate the bioavailability of different organic selenium (Se) products in finishing pigs. A total of 48 growing pigs, average body weight $47.6kg{\pm}0.05$, were allotted to four different treatments in a randomized complete block (RCB) design in three replicates with four pigs per pen. Three different organic Se products, Se-enriched yeast (treatments A and B) and Se-proteinate (treatment C), were used in conjunction with a basal diet with no added Se as a control treatment. In growing period, pigs were fed the same diet but finishing pigs were fed each treatment diet containing organic Se products for 6 weeks. During the experimental period, feed intake and body weight were measured and blood samples were collected to determine the Se concentration. At the end of this experiment, 3 pigs per treatment were killed and various tissues (loin, liver, kidney, pancreas and spleen) were collected to analyze the Se concentration. The body weight, and average daily feed intake (ADFI) were similar among treatments, but the average daily gain (ADG) was increased on Se-proteinate treatment (p<0.01) and gain-to-feed ratio (G/F ratio) was improved on Se yeast B or Se-proteinate treatment (p<0.01). The tissue Se content was also increased when pigs were fed organic Se sources, and Se was retained efficiently in loin (p<0.01) and kidney (p<0.05) when Se yeast B was provided. The serum Se concentration was increased when organic Se was provided and was higher when pigs were fed Se-proteinate (p<0.01); subsequently liver Se was also higher on Se-proteinate treatment than other treatments. The Se yeast A treatment did not show any increment of Se concentration both in serum and tissues. This result demonstrated that Se retention and bioavailability in finishing pigs were varied by Se products although organic sources were provided. Consequently, each organic Se product should be evaluated before it is used as a supplement in animal feed.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.967-976
• /
• 1996

Straw and other fibrous by-products are inevitably produced during cereal production and have traditionally been used for many purposes including feeding animals . The potential of these by -products as a feed resource for ruminants is being increasingly appreciated (FAO , 1977). In the future, the amount of cereals fed to farm animals will have to be reduced and livestock will have to rely more on by-products such as straw. The method of animal production can be classified by the major portion of feed. One is animal forage and the other is grains. In Korea , livestock farmers normally depend more than 70% upon grains for the feed stuff. The livestock production system causes the unbalance of nutrition, and results in low productivity of animal farming. In many livestock farms in Korea the rice straw is using as a major forage and the amount of rice straw fed takes 46% of total amount of required forages. Especially the rice straw is mainly using during spring, fall and winte season. However, there are still lots of problems to solved such as harvesting cost, transportation between rice farm ad livestock farm, and quality loss during drying and storage . Therefore the mechanization of straw harvesting is urgently needed to use the renewable agricultural by-products and to overcome the shortage of animal forage. The objective of this research is to develope a straw harvester with new concept which can solve the problems of the quality loss and the labor cost during drying in a field, collecting , and storage. The developed straw harvester is self-propelled machine rebuilt by rice combine and equipped with the pick-up device, the macerater and the mat-forming device.

• Animal Bioscience
• /
• v.36 no.7
• /
• pp.1091-1100
• /
• 2023

Objective: The present study is to examine the effect of high inclusion of co-products in pig diets (referred to as an alternative diet) during the finishing stage on pig growth performance, meat quality and boar taint compounds. Methods: Growing pigs were fed an alternative diet made with distillers dried grains with solubles (25%), canola meal (20%), and wheat middling (15%) or a control diet based on barley and soybean meal to investigate the impact of co-products on pig performance and meat quality. Sixteen female and sixteen entire male Duroc×(Large White×Landrace) pigs (22.6±2.07 kg, body weight±standard error) were equally allocated to the diets. Results: Pigs fed the alternative diet had a lower feed intake; however, growth rate and feed conversion efficiency were unaffected by diet. A diet by sex interaction was found for gain:feed whereby males fed the alternative diet had the best feed conversion (p<0.01). Pork from pigs fed the alternative diet had lower a^* and Chroma and protein % (p<0.05), while other meat quality characteristics were unaffected. The alternative diet reduced backfat skatole levels (p<0.001). Conclusion: A diet containing high inclusion levels of co-products can be fed to pigs during the finishing stage without detrimental effects on pig performance or meat quality and with the potential to enhance pork flavour. This finding suggests a solution to increase the sustainable development of pig production.

• Journal of Biosystems Engineering
• /
• v.22 no.4
• /
• pp.439-450
• /
• 1997

Most of Korean feed mill has a pregrind system which was suitable for the processing of less number of ingredients and finished products, and good for the mash type feed product. But industries has been changed in production volume and cost, and also from mash to further processed products such as pelleted and extruded. Therefore, Korea feed industries now should change the process, especially the grinding system from the current pregrind to other grind system, but this change will cost a lot of investment and also loosing current grinding system, and should have production shut down during the construction period. To solve these problems, combined grinding system based on a new model mill has been developed. The combined grind system is combination of pregrind and postgrind system, which has the advantages of those two grind systems, and also which can allow to utilize existing pregrind system continuously without any production interruption due to new postgrind system construction. This newly developed model has been applied to the feed mill expansion project of `B`feed company in 1994, and it was very successful application and showed excellent results as we intended. The new model mill, combined grind system applied can save fixed asset investment because old pregrind system can be used as is, and also can reduce production cost and improve product quality. And the possibility of critical production shut down can be much lowered. Within this new grinding model development, multi-screen combination system has been developed for the better grinding texture quality and safer operation. This new model mill with combined grind system will be applied by most feed manufacturing plant and may enhance their production competitiveness, and the further study and development should be continued.

• Korean Journal of Agricultural Science
• /
• v.43 no.5
• /
• pp.761-768
• /
• 2016

Recently, swine production costs have increased due to increased feed cost, especially the price of corn and soybean meals. Soybean meal is traditionally an expensive ingredient, but the price of corn has dramatically increased because of increased biofuel production. This change has resulted in the swine industry looking for alternatives in order to reduce feed cost, resulting in decreased production costs. Thus, various alternatives have been used as feed ingredients to replace corn, soybean meal, or other expensive ingredients. One othercandidate may be palm kernel co-products that are a by-product of oil extraction from palm fruits. Palm kernel co-products have not been used in swine diets due to high fiber content and imbalanced amino acids compared with corn and soybean meal. However, recent studies showed that palm kernel co-products did not have any negative effects on growth performance of pigs when they replaced some proportions of corn and soybean meal. In addition, palm kernel co-products may provide some physiological properties to pigs by modifying gut microbiota and/or immunity of pigs, resulting in improvement of growth and health of pigs. Therefore, the value of palm kernel co-products were reviewed as one of the alternatives for corn, soybean meal, or other major ingredients in swine diets.

• Korean Journal of Poultry Science
• /
• v.26 no.4
• /
• pp.261-265
• /
• 1999

The objective of this experiment was to investigate the effect of feeding Angelica gigas Nakai by-products on performance and meat quality of Korean native chicks(KNC). Five hundred forty KNC were placed into 0, 0.2, and 0.4% Angelica gigas supplements with four replications between males and females. Weight gain, feed conversion ratio(FCR), breast meat lipid, fatty acid and protein contents were measured from 17 to 20 weeks old. Egg production, feed intake and FCR were examined from 22 to 29 weeks at four weeks at four weeks intervals. Basal diets based on corn and soybean meal contained 15% crude protein and 2,850㎉/kg ME for the growing period, 16.5% and 2,800㎉/kg for the laying period. Experiments were designed in a one way analysis. Weight gain of female chicks fed 0.2% Angelica gigas by-products increased significantly compared to that of other treatments for the growing period, but was not consistency in male groups. Moisture, protein, fat content were not statistically different among all treatments. Fatty acid composition(C16:0, C18:0) of chicks fed 0.2% Angelica gigas by-products was higher than other treatments. In laying period, hens fed 0.2 or 0.4% Angelica gigas Nakai by-products seemed to increase the egg production and significantly improved FCR compared to that of control(P〈0.05). Birds fed 0.4% treatment showed significantly the lowest feed intake and FCR of all treatments(P〈0.05). The results of these studies indicated that dietary supplemental Angelica gigas by-products may have a role to improve the performance of KNC.

• Fisheries and Aquatic Sciences
• /
• v.26 no.6
• /
• pp.367-379
• /
• 2023

The rapid expansion of shrimp production requires a huge amount of protein sources from soybeans and wild-caught fishmeal; both are becoming a shortage. Meanwhile, catfish production and processing is a giant industry in Vietnam, which produce hundred thousand tonnes of protein- and lipid-rich by-products, annually. Using catfish by-products to gradually replace the traditional protein sources in shrimp aquaculture may bring triple benefits: 1) reducing pressure on wild fish exploitation for fishmeal, 2) reducing the environmental impacts of catfish by-products, and 3) increasing the value and sustainability of aquaculture production. In this study, we used catfish by-products to produce fish protein hydrolysate (FPH) and nano-hydroxyapatite (HA) as additives in feed for Pacific white shrimp (Litopenaeus vannamei). The supplement mixture of FPH and HA was added into the commercial diet (Charoen Pokphand Group [CP], 38% protein, and 6.5% lipid) to reach 38%, 38.5%, 40%, 43%, and 44% of the crude protein content. The survival and growth of shrimps were weekly assessed to day 55. The results showed that the shrimp growth was highest at 43% crude protein content in the feed as indicated by an increase of 124% and 112% in shrimp weight and length, respectively, compared to the commercial reference diet. No negative effects of adding the mixture of FPH and HA on the water quality were observed. Vibrio density was lower than 6.5 × 10³ CFU/mL, which is the lowest Vibrio density negatively affecting the shrimp growth and development. These findings indicate that the mixture of FPH and HA are promising additive components in feed for post-larval shrimp L. vannamei diets.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.10
• /
• pp.1464-1472
• /
• 2011

Effects of a supplemental fermented agro by-products diet on growth performance, blood characteristics and carcass traits were investigated in fattening pigs. The fermented diet mainly contained 38.0% brewer's grain, 25.0% rice bran and 21.0% byproduct of king oyster mushrooms. The mixed ingredients were fermented at $40^{\circ}C$ for 7 days and fed to crossbred barrow pigs for 62 days. Ninety pigs were housed in 10 head per pen with three replicate pens per treatment. The pigs in the control group were fed with formula feed, while the pigs in T1 group were fed 20, 40, 60, 80 and 100% fermented diet substituted with formula feed on 1 week interval. Pigs in T2 group were fed 30, 60 and 100% fermented diet substituted with formula feed on 1 week interval. The fermented diet significantly (p<0.05) decreased body weight gain and feed efficiency of pigs. The blood characteristics differed with diet types. Carcass grade was significantly better (p<0.05) in the pigs fed fermented diet than in the pigs fed control diet as well as ratio of high grade was higher in the fermented diet groups. Therefore, although a dietary of fermented diet decreased growth performance and feed efficiency, it improved the carcass grade in pigs.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.96-102
• /
• 2000

High speed machining aims to raise the productivity and efficiency by making more precise and higher value-added products than any other machining method by means of the high speediness of spindle and feed drive system. The purpose of this study is to investigate the effects of the run-out of endmill on the dimension precision of workpiece and to obtain the fundamental data on high speed machining which is available by machining the side of Al-alloy with solid carbide endmills in high speed machining center and by measuring dimensions and surface roughness. From the results of experimentation following are obtained ; if spindle speed is ultra high in conditions that radial depth of cut and feed per tooth are very small highly precise and accurate products are to be made efficiently with high feed rate. and so we can raise productivity.

• Journal of Animal Science and Technology
• /
• v.65 no.3
• /
• pp.490-510
• /
• 2023

Feed safety is needed to produce and provide safe animal feeds for consumers, animals, and the environment. Although feed safety regulations have been set for each country, there is a lack of clear feed safety regulations for each livestock. Feed safety regulations are mainly focused on heavy metals, mycotoxins, and pesticides. Each country has different safe levels of hazardous materials in diets. Safe levels of hazardous materials in diets are mostly set for mixed diets of general livestock. Although there is a difference in the metabolism of toxic materials among animals, the safe level of feed is not specific for individual animals. Therefore, standardized animal testing methods and toxicity studies for each animal are needed to determine the correct safe and toxic levels of hazardous materials in diets. If this goal is achieved, it will be possible to improve livestock productivity, health, and product safety by establishing appropriate feed safety regulations. It will also provide an opportunity to secure consumer confidence in feed and livestock products. Therefore, it is necessary to establish a scientific feed safety evaluation system suitable for each country's environment. The chance of outbreaks of new hazardous materials is increasing. Thus, to set up appropriate toxic levels or safe levels in feed, various toxicity methods have been used to determine toxic levels of hazardous materials for humans and animals. Appropriate toxic testing methods should be developed and used to accurately set up and identify toxicity and safe levels in food and feed.