• Journal of Astronomy and Space Sciences
• /
• v.23 no.1
• /
• pp.19-28
• /
• 2006

The noise temperature of existing millimeter-wave receivers is already within two or three times quantum noise limit. One of practical ways to increase the observation speed of single dish radio telescope without longer integration time is use of multi-beam focal plane array receiver as demonstrated in several large single dish radio telescopes. In this context the TRAO (Taeduk Radio Astronomy Observatory), which operates a 143n Cassegrain radio telescope, is planning to develop a 4 x 4 beams focal plane array SIS receiver system for 86-115 GHz band. Even though millimeter-wave HEMT LNA-based receivers approach the noise temperature comparable to the SIS receiver at W-band, it is believed that the receiver based on SIS mixer seems to offer a bit more advantages. The critical part of the multi-beam array receiver will be sideband separating SIS mixers. Employing such a type of SIS mixer makes it possible to simplify the quasi-optics of receiver. Otherwise, an SSB filter should be used in front of the mixer or some sophisticated post-processing of observation data is needed. In this paper we will present a preliminary design concept and components needed for the development of a new 3 mm band multi-beam focal plane array receiver.

• Journal of Powder Materials
• /
• v.5 no.1
• /
• pp.28-34
• /
• 1998

Plasma sprayed ceramic coatings are widely used in various industrial fields to improve their properties or to reduce the production cost. The ceramic powders for plasma spray coating have been mainly manufactured by spray drying or fused+crushed process. In this study, chromium oxide which has better mechanical properties than those of the other ceramic was selected and agglomerated chromium oxide powders for plasma spray coating were produced by spray drying process with a various processing condition. The large hollow powders and the harsh surfaced powders are formed at high slurry feed rate more than 163 g/min. and low binder concentration less than 2wt%, respectively. These powders cause the considerable decrease of flowability and apparent density. The powders produced by spray drying process have the spherical shape with the mean size of 45 ${\mu}m$, but these are shown lower apparent density and flowability than the powders produced by fused+crushed powders. The plasma spray coated layers by spray dried powders are shown a different microstructure with that by fused+crushed powders in porosity shape, but their properties such as density, hardness and bond strength are similar.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.2
• /
• pp.38-45
• /
• 2016

Since a 5-axis machine tool has two rotary axes, it offers numerous advantages, such as flexible accessibility, longer tool life, better surface finish, and more accuracy. Moreover, it can conduct whole machining by rotating the rotary feed axes while setting the fixture at once without re-fixing in contrast to conventional 3-axis machining. However, it is difficult to produce complicated products that have a hollow shape. In contrast, 3D printing can produce an object with a complicated hollow shape easily and rapidly. However, because of layer thickness and shrinkage, its surface finish and dimensional accuracy are not adequate. Therefore, this study proposes hybrid technology by integrating the advantages of these two manufacturing processes. 3D printing was used as the additive manufacturing rapidly in the whole body, and 5-axis machining was used as the subtractive manufacturing accurately in the joining and driving places. The reliability of the proposed technology was verified through a comparison with conventional technology in the aspects of processing time, surface roughness. and dimensional accuracy.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.20-26
• /
• 2003

This study proposes the construction of attractor quadrant method for high-precision cutting characteristics evaluation of non-ferrous metals. Also this paper aims to find the optimal cutting conditions of diamond turning machine by measuring surface form and roughness to perform the cutting experiment of non-ferrous metals, which are aluminum, with diamond tool. As well, according to change cutting conditions such as feed rate, using diamond turning machine to Perform cutting Processing, by measuring cutting force and surface roughness and according to cutting conditions the aluminum about cutting properties. Trajectory changes in the attractor indicated a substantial difference in fractal characteristics and attractor quadrant characteristics. In quantitative quadrant feature extraction, 1,309 point in the case of A17075 (one quadrant) and 1,406 point (one quadrant) in the case of brass were proposed on the basis of attractor reconstruction. Proposed attractor quadrant method can be used for high-precision cutting characteristics evaluation of non-ferrous metals.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.3
• /
• pp.747-754
• /
• 1999

Food waste in school foodservices is an important factors in managing expense and in evaluating the acceptance of served meals. This study was undertaken to investigate the management of food waste and the opinion of dietitians in one hundred fourty nine elementary school foodservices, in Pusan, Korea. When serving places were compared, the classroom generated more leftover and plate waste than those of lunchroom(p<0.05). In rank for generating raw waste, the residue from vegetables was the highest in first order. Fruit, eggs, fish, and shell fish also left the most raw waste, respectively, in descending order. The residue that generated the most plate waste in the first and the second order was from soup and pot stew, and vegatables side dishes, respectively. The treatment process of food waste which was the most common in school foodservices was the fertilization by processing machine in order to make recyclable fertilizer(52.1%). Food waste at 30.8% of foodservices was processed for live stock feed. At 92.3% of investigated foodservices, food waste water was drained through a round net basket. Before treating as a waste, food residue was recycled at only 41.9% of foodservices. The main utilization of food residue was the production of soap from used oil. Most dietitians in school foodservices recognized that treating food waste was not so inconvenient, although, the problems of odor and hygiene were not solved. They also thought that the liquid residue(54.1%) and oil(30.4%) among food waste were primarily responsible for resulting environmental pollution.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.30-41
• /
• 1995

This paper proposed a simple method for measuring surface roughness of ground surface. Utilizing non-contact in-process measuring system using the diode laser. The measurement system is consisted of a laser unit with a diode laser and a cylindrical lens, a detecting unit with polygon mirror and CCD array sensor, and a signal processing unit with a computer and device. During operation, this measuring system can provide information on surface roughness in the measuring distance with a single sampling and simultaniously monitor the state of the grind wheel. The experimental results, showed that the Increase of the feed rate and the dressing speed an caused increase in the surface roughness and when the surface roughness is 4Rmax-10Rmax, the cutting speed is 1653m/min-1665m/min, the table speed is 0.2n1/min -0.9m/min, the dressing speed is 0.2mm/rev～0.4mm/rev, the stylus method and the in-process method can be obtained the same results. Thus, under limited working conditions, using the proposed system, the surface roughness of the ground surface during cylindrical grinding can be obtained through the in-process measurement method using the diode laser.

• Microbiology and Biotechnology Letters
• /
• v.3 no.3
• /
• pp.117-122
• /
• 1975

In order to develop an activated sludge which can be used for both waste treatment and protein source of animal feed, microorganisms were isolated from sewages of various wheat or sweet potato starch processing plants and their activities were tested. Out of 32 isolates which composed of two protozoan genera and 13 bacterial strains, were screened and three bacterial stranis were found to be most effective in both floe-formation and wheat starch waste liquid stabilization.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.350-363
• /
• 2006

Recently, the micro end-milling processing is demanded the high-precise technique with good surface roughness and rapid time in milli-structure parts, micro machine parts and molding industry. The cutting conditions of micro end-milling has an effect on surface roughness of cutting surface. Therefore this study was carried out to cut stainless steel using high revolution air bearing spindle and micro end-mill and analyze the cutting condition to get the optimum surface roughness by design of experiment. From this study, surface roughness have an much effect according to priority on depth of cut, revolution of spindle and feed.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.798-802
• /
• 2002

Data provider and data user are linked together by suitable data. This implies that for a successful relationship the provider knows what kind of data, whether original or processed, is needed by the user and that the user articulates his needs to the provider. The co-operation between Korea and Austria aims at identifying these needs and to provide suitable routines for the processing of satellite data. Partners of this co-operation are the Korea Aerospace Research Institute, ARC Seibersdorf research and GeoVille. While the focus of the former lies in the development and running of satellite systems, the latter two have experience in the development and set up of applications in the field of remote sensing. Based on the complementary know-how by the institutions involved, projects were set up in Korea and Austria to fulfill this need and establish a pilot data feed for governmental applications.

• Korean Journal of Materials Research
• /
• v.27 no.12
• /
• pp.716-721
• /
• 2017

SiAlON-based ceramics are some of the most typical ceramic materials used as cutting tools for HRSA(Heat Resistant Super-Alloys). SiAlON can be fabricated using ceramic processing, such as mixing, granulation, compaction, and sintering. Spray drying is a widely-used method for producing a granular powder of controlled morphology and size with flowability. In this study, we report a systematic investigation aimed at optimizing spherical granule morphology by controlling spray-drying parameters such as gas flow and feed rate. Before spray drying, the viscosities of the raw material slurries were also optimized with the amount of dispersant added.