• 한국환경과학회지
• /
• 제25권5호
• /
• pp.645-654
• /
• 2016

For the purpose of reuse the wasted by-products from the skate process to the health functional food or medicinal material, chondroitin sulfate was extracted from the skate cartilage with the method of hydrolysis with protease enzyme, and the contents of chondroitin sulfate and hydrolyzed protein were measured qualitatively and quantitatively. The effects of chondroitin sulfate on body weight or liver weight changes, hepatotoxicity elimination and anti-inflammatory actions were measured from in vivo test with feed-treated mice. From the hydrolytic extraction of skate cartilage with the mixture of 1% alcalase and 1% protease for 4 hours, the extraction yield of chondroitin sulfate was about 32.55%. The content and molecular weight of chondroitin sulfate was 26.63% and $2.85{\times}10^5Da$., respectively and the content ratio of chondroitin sulfate to protein was measured to 1 to 2.76 with gel permeation chromatography. For the odor component, trimethylamine decreased about 30% but almost not ammonia from chondroitin sulfate with the treatment of activated carbon. From the feeding chondroitin sulfate to mice, the control effect of body and liver weights decrease was measured, anti-inflammatory action and hepatotoxicity elimination action were also measured. From these results, process operation conditions for manufacturing of chondroitin sulfate were suggested.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.15-22
• /
• 2006

This paper presents a novel signal tracking algorithm for GNSS receivers using a MLE technique. In order to perform a robust signal tracking in severe signal environments, e.g., high dynamics for navigation vehicles or weak signals for indoor positioning, the MLE based signal tracking approach is adopted in the paper. With assuming white Gaussian additive noise, the cost function of MLE is expanded to the cost function of NLSE. Efficient and practical approach for Doppler frequency tracking by the MLE is derived based on the assumption of code-free signals, i.e., the cost function of the MLE for carrier Doppler tracking is used to derive a discriminator function to create error signals from incoming and reference signals. The use of the MLE method for carrier tracking makes it possible to generalize the MLE equation for arbitrary codes and modulation schemes. This is ideally suited for various GNSS signals with same structure of tracking module. This paper proposes two different types of MLE based tracking method, i.e., an iterative batch processing method and a non-iterative feed-forward processing method. The first method is derived without any limitation on time consumption, while the second method is proposed for a time limited case by using a 1st derivative of cost function, which is proportional to error signal from discriminators of conventional tracking methods. The second method can be implemented by a block diagram approach for tracking carrier phase, Doppler frequency and code phase with assuming no correlation of signal parameters. Finally, a state space form of FLL/PLL/DLL is adopted to the designed MLE based tracking algorithm for reducing noise on the estimated signal parameters.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2019년도 춘계학술발표대회
• /
• pp.451-454
• /
• 2019

In this paper, we propose a verifiable image transformation networks to transform face sketch to photo and vice versa. Face sketch-photo is very popular in computer vision applications. It has been used in some specific official departments such as law enforcement and digital entertainment. There are several existing face sketch-photo synthesizing methods that use feed-forward convolution neural networks; however, it is hard to assure whether the results of the methods are well mapped by depending only on loss values or accuracy results alone. In our approach, we use two Resnet encoder-decoder networks as image transformation networks. One is for sketch-photo and another is for photo-sketch. They depend on each other to verify their output results during training. For example, using photo-sketch transformation networks to verify the photo result of sketch-photo by inputting the result to the photo-sketch transformation networks and find loss between the reversed transformed result with ground-truth sketch. Likely, we can verify the sketch result as well in a reverse way. Our networks contain two loss functions such as sketch-photo loss and photo-sketch loss for the basic transformation stages and the other two-loss functions such as sketch-photo verification loss and photo-sketch verification loss for the verification stages. Our experiment results on CUFS dataset achieve reasonable results compared with the state-of-the-art approaches.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제22권3호
• /
• pp.262-269
• /
• 2019

Purpose: As the importance of breastfeeding has been reinforced, human milk is often stored for practical reasons. Therefore, we evaluated optimal storage and processing methods for human milk from a nutritional standpoint. Methods: Human milk samples were collected between June 2017 and February 2018. Also, data about maternal information were collected. Human milk was analyzed for macronutrients and caloric content. The samples were subdivided into groups for nutrient analysis. The control group (fresh milk) was not stored or processed. The other groups (9 groups) consisted of samples analyzed based on different storage temperatures (room temperature, refrigerated, frozen), defrosting methods (bottle warmer, room temperature thawing, microwave oven), and storage period (1 week, 1 month, 2 months) and compared with the control group. Results: There was no statistically significant difference in the nutrient content of human milk among the collected samples. A significant change in the content of macronutrients in milk samples was observed under storage condition at different temperatures for 1 week with subsequent thawing with bottle warmer compared to fresh milk. Under storage at $-20^{\circ}C$ for 1 week with subsequent thawing with different defrosting methods, a significant change in the content of macronutrients in milk samples was observed compared to fresh milk. After storage at $-20^{\circ}C$ for different periods and thawing with a bottle warmer, a significant change in macronutrient content in milk samples was observed compared to fresh milk regardless of the storage period. Conclusion: Unlike previous guidelines, changes in macronutrient content in milk samples were observed regardless of the method of storing and thawing. Apparently, it is proposed that mothers should feed fresh human milk to their babies without storing.

• Structural Engineering and Mechanics
• /
• 제80권5호
• /
• pp.503-522
• /
• 2021

This paper investigates experimentally and numerically the influence of drilling process on the mechanical and thermomechanical behaviors of woven glass fiber reinforced polymer (GFRP) composite plate. Through the experimental analysis, a CNC machine with cemented carbide drill (point angles 𝜙=118° and 6 mm diameter) was used to drill a woven GFRP laminated squared plate with a length of 36.6 mm and different thicknesses. A produced temperature during drilling "heat affected zone (HAZ)" was measured by two different procedures using thermal IR camera and thermocouples. A thrust force and cutting torque were measured by a Kistler 9272 dynamometer. The delamination factors were evaluated by the image processing technique. Finite element model (FEM) has been developed by using LS-Dyna to simulate the drilling processing and validate the thrust force and torque with those obtained by experimental technique. It is found that, the present finite element model has the capability to predict the force and torque efficiently at various drilling conditions. Numerical parametric analysis is presented to illustrate the influences of the speeding up, coefficient of friction, element type, and mass scaling effects on the calculated thrust force, torque and calculation's cost. It is found that, the cutting time can be adjusted by drilling parameters (feed, speed, and specimen thickness) to control the induced temperature and thus, the force, torque and delamination factor in drilling GFRP composites. The delamination of woven GFRP is accompanied with edge chipping, spalling, and uncut fibers.

• 현장농수산연구지
• /
• 제3권1호
• /
• pp.132-141
• /
• 2001

옥수수 알곡(whole corn)을 분쇄(ground corn; GC), 파쇄(cracked corn; CC), 박편(flaked corn; FC) 및 수침(soaked corn; SC)등 가공방법을 달리하여 처리하였을 때 반추가축에 있어서 미생물의 부착양상에 미치는 영향을 구명하고자 한 본 연구의 요약은 다음과 같다. 1. 한우의 반추위내에 각 처리별 옥수수를 12 및 24시간 배양하여 주사 전자현미경을 이용하여 반추 미생물의 부착양상과 사료 기질의 형태를 조사하였다. 2. 분쇄 및 파쇄 옥수수에서 가장 많은 미생물들이 부착되어 있는 것이 관찰되었고 옥수수 알곡 및 수침 옥수수는 전분입자에 미생물의 부착을 관찰 할 수 없었으며, 단지 배양시간이 경과함에 따라 옥수수의 외피에 많은 미생물이 부착되었고 외피의 분해가 일어나는 것이 관찰되었다. 3. SEM 결과를 통하여, 옥수수의 입자가 작게 가공처리 될수록 미생물 군락의 형성이 용이하여, 반추위내 옥수수의 분해율을 향상시킨다고 판단된다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제47권2호
• /
• pp.79-89
• /
• 2023

This paper is about the development results of an automatic silkworm breeding system to reduce labor and time by automatically performing the works for silkworm droppings changing and feed its food. It consists of an automatic guided vehicle and a processing unit. The automatic guided vehicle transports a silkworm dropping changing frame mounted on a silkworm tray stand, and the processing unit takes over the dropping changing frame on it, removes excrement contained the droppings changing frame and feeds silkworm food. In the case of the current silkworm farming, because the breeding period for large silkworms (4 to 5 stage) is short to 14 days and the supply of mulberry leaves takes 98% of the total amount of mulberry leaves needed for breeding silkworms at this time, labor concentration is intensive, and all breeding works depends on manpower. Therefore, it was difficult to breed large silkworms on a large scale. Moreover, silkworms are bred by adding Silkworm bed (Seop) and mulberry in the silkworm tray, and their droppings changing is to separate silkworms and excrement by moving silkworm trays one by one, and the production cost increases due to the high-cost manpower for silkworm breeding. To solve this problem, technology for automating silkworm breeding has also been developed. However, there is still a limitation that silkworm feeding and droppings changing works are not suitable for mass breeding because a lot of labor and time are spent depending on manual work. Therefore, a new silkworm breeding system for breeding silkworm automatically is needed and so we developed an Automatic Silkworm Breeding System applying the droppings change frame, the inverting unit, the feeding silkworm food device and automatic guided vehicle.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권3호
• /
• pp.349-356
• /
• 2014

The objective of this study was to evaluate the effects of molasses and propionic acid on the fermentation quality and aerobic stability of total mixed ration (TMR) silages prepared with whole-plant corn in Tibet. TMR (354 g/kg DM) was ensiled with four different treatments: no additive (control), molasses (M), propionic acid (P), and molasses+propionic acid (PM), in laboratory silos (250 mL) and fermented for 45 d. Silos were opened and silages were subjected to an aerobic stability test for 12 days, in which chemical and microbiological parameters of TMR silages were measured to determined the aerobic deterioration. After 45 d of ensiling, the four TMR silages were of good quality with low pH value and ammonia/total N (AN), and high lactic acid (LA) content and V-scores. M silage showed the highest (p<0.05) LA content and higher dry matter (DM) recovery than the control and P silages. P silage had lower (p<0.05) LA content than the control silage. During aerobic exposure, lactic acid contents decreased gradually in the control and M silages, while that of P and PM silages increased, and the peak values were observed after 9 d. M silage had similar yeast counts with the control silage (> $10^5$ cfu/g FM), however, it appeared to be more stable as indicated by a delayed pH value increase. P and PM silages showed fewer yeasts (< $10^5$ cfu/g FM) (p<0.05) and were more stable than the control and M silages during aerobic exposure. It was concluded that M application increased LA content and improved aerobic stability of TMR silage prepared with whole-plant corn in Tibet. P application inhibited lactic acid production during ensiling, and apparently preserved available sugars which stimulated large increases in lactic acid during aerobic exposure stage, which resulted in greater aerobic stability of TMR silage.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.271-274
• /
• 2014

본 논문에서는 UHD급 영상의 실시간 처리를 위한 고성능 HEVC(High Efficiency Video Coding) SAO(Sample Adaptive Offset) 부호화기의 효율적인 하드웨어 구조를 제안한다. SAO는 HEVC에서 새롭게 채택된 루프 내 필터 기술 중 하나이다. 본 논문에서 제안하는 SAO 부호화기 하드웨어 구조는 메모리 접근 최소화 및 화소들의 처리를 간소화하기 위해 three-layered buffer를 사용한다. 또한 연산시간 및 연산량을 줄이기 위해서 4개의 화소들을 병렬적으로 에지 오프셋과 밴드 오프셋으로 분류하며, 화소들의 분류와 SAO 파라메터 적용을 2단계 파이프라인 구조로 구현하고, 하드웨어 면적을 줄이기 위해서 덧셈과 뺄셈, 쉬프트 연산, 그리고 재귀 비교기만을 사용한다. 본 논문에서 제안하는 SAO 부호화기 하드웨어 구조는 Verilog HDL로 설계하였으며, TSMC $0.18{\mu}m$ CMOS 표준 셀 라이브러리를 사용하여 합성한 결과 약 180k개의 게이트로 구현되었다. 또한, 110MHz의 동작주파수에서 4K UHD급 해상도인 $4096{\times}2160@30fps$의 실시간 처리가 가능하다.

• Animal Bioscience
• /
• 제36권3호
• /
• pp.451-460
• /
• 2023

Objective: This program aimed to reveal the association of feed intrinsic molecular structure with nutrient supply to animals from canola feedstocks and co-products from bio-oil processing. The special objective of this study was to quantify the relationship between molecular spectral feature and nutrient availability and develop nutrient prediction equation with vibrational molecular structure spectral profiles. Methods: The samples of feedstock (canola oil seeds) and co-products (meals and pellets) from different bio-oil processing plants in Canada (CA) and China (CH) were submitted to this molecular spectroscopic technique and their protein and carbohydrate related molecular spectral features were associated with the nutritional results obtained through the conventional methods of analyses for chemical and nutrient profiles, rumen degradable and intestinal digestible parameters. Results: The results showed that the spectral structural carbohydrates spectral peak area (ca. 1,487.8 to 1,190.8 cm^-1) was the carbohydrate structure that was most significant when related to various carbohydrate parameters of canola meals (p<0.05, r>0.50). And spectral total carbohydrate area (ca. 1,198.5 to 934.3 cm^-1) was most significant when studying the various carbohydrate parameters of canola seeds (p<0.05, r>0.50). The spectral amide structures (ca. 1,721.2 to 1,480.1 cm^-1) were related to a few chemical and nutrient profiles, Cornell Net Carbohydrate and Protein System (CNCPS) fractions, truly absorbable nutrient supply based on the Dutch protein system (DVE/OEB), and NRC systems, and intestinal in vitro protein-related parameters in co-products (canola meals). Besides the spectral amide structures, α-helix height (ca. 1,650.8 to 1,643.1 cm^-1) and β-sheet height (ca. 1,633.4 to 1,625.7 cm^-1), and the ratio between them have shown to be related to many protein-related parameters in feedstock (canola oil seeds). Multi-regression analysis resulted in moderate to high R² values for some protein related equations for feedstock (canola seeds). Protein related equations for canola meals and carbohydrate related equations for canola meals and seeds resulted in weak R² and low p values (p<0.05). Conclusion: In conclusion, the attenuated total reflectance Fourier transform infrared spectroscopy vibrational molecular spectroscopy can be a useful resource to predict carbohydrate and protein-relates nutritional aspects of canola seeds and meals.