• 한국임상수의학회지
• /
• 제25권4호
• /
• pp.268-273
• /
• 2008

For evaluation of immune stimulation effect of lacquer tree extracts, lymphocytes were counted by labeling of FITC-conjugated monoclonal antibody in the pheripheral blood of pigs that fed with a fodder supplemented by lacquer tree extracts. Populations of MHC-II+, CD4+, and CD8+T lymphocytes were increased more than 2% level after 1 week feed supply of the lacquer tree extracts. The increase of those T cells reached at maximum level after 2 weeks in the tested group. B lympyocytes with surface IgM were increased 5% after 1 week feed supply of the lacquer tree extracts, and their numbers reached maximum after 2 weeks in the tested group. For the assessment of cytotoxicity of the lacquer tree extracts, morphological changes were examined on the epithelial cells of small intestine from pigs fed with a fodder supplemented by 0.1 % lacquer tree extracts for 6 weeks (the tested group). Thin-sectioned tissue of small intestine was fixed with glutaraldehyde, then coated with gold particles, and the specimen was examined under scanning electron microscope. The villi on the mucus membrane of jejunum and ileum from the tested pigswere enlarged on the tip and were linked each other.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권11호
• /
• pp.1622-1633
• /
• 2002

The effects of tuna oil supplementation (0, 1, 2 and 3%) to pig diets on growth and carcass yield as well as meat quality were determined in 40 crossbred pigs. Animals were fattened from 30 to 90 kg of live-weight. Twenty-four hours after slaughter, following various early- and late-post mortem measurements, loin, backfat and belly were prepared from the carcasses. Bacon was produced from the belly part by curing and smoking. Neither performance (feed intake, daily gains, feed conversion efficiency) nor carcass quality (slaughter weight, dressing percentage, lean percentage, nutrient composition of the loin) were significantly affected by tuna oil supplementation. Tuna oil also had no clear effects on early- and late-post mortem meat quality traits, water-holding capacity and tenderness of the M. longissiumus dorsi (LD). Colour traits of LD and backfat, and backfat firmness were not significantly affected by tuna oil, either. However, there was a certain trend to elevated fat contents of LD (and bacon), but not of backfat, with increasing levels of tuna oil in feed. Pigs receiving elevated proportions of tuna oil expressed lower VLDL cholesterol and triglyceride concentrations in blood plasma, whereas the cholesterol content of LD, backfat and bacon did not reflect this trend. Effects of tuna oil on fatty acids in LD, backfat and bacon were often small in extent, except those concerning the long-chain polyunsaturated fatty acids. With 3% tuna oil in the diet, the contents of the particularly desired omega-3 fatty acids, C20:5 and C22:6, were 0.1 and 0.2 g/kg in LD. The corresponding values for backfat and bacon were 2.6 and 12.6 g/kg, and 1.3 and 9.2 g/kg, respectively. Tuna oil supplementation was associated with significant adverse effects on flavour and overall acceptance of bacon (not significant in LD although numerically the same trend was noted), but these effects on sensory ratings were limited in extent. Also shelf life of the products, determined as TBA value after different storage periods at $4^{\circ}C$ in LD, backfat and bacon, was significantly reduced. Overall, the present study suggests that omega-3 fatty acids may be enriched in pork by feeding tuna oil with few undesired side-effects, particularly those on sensory perception and shelf life, suggesting immediate consumption of the products is advisable. Most economically important traits (performance, slaughter and physical meat quality) remained unaffected.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권2호
• /
• pp.254-265
• /
• 2002

Soybean meal (SBM) is a major protein source in poultry feeds and one of the best quality ingredients because of the relatively high protein content, good amino acid profile and bioavailability. But soybean meal quality is largely dependent on the processing technology and origins. In this experiment, effects of three different soybean meals were evaluated in layer (experiment 1) and broiler (experiment 2). Soybean meal sources used in the experiments were the US-originated dehulled soybean meal (USDHSBM), India-originated non-dehulled soybean meal (India SBM) and Brazil-originated non-dehulled soybean meal (Brazil SBM). Experiment 1 was conducted during growing and laying periods and evaluated the interactive effects of soybean meal sources according to feeding periods on growth performance and egg quality. Experiment 2 was conducted during growing period (day 1-35) and finishing period (day 35-42). The growth performance was measured for the same periods and any possible interaction between soybean meal origins and crude protein levels was also studied. In experiment 1, chicks fed India SBM utilized feed more efficiently (p<0.05) than those fed Brazil SBM from day 29 to day 42. The body weights of layers during the laying period had no relation to egg production. But egg weights were significantly heavier in all the USDHSBM fed groups than other groups (p<0.001) and depended on feed protein source during growing period (p<0.001). The average egg weight of the USDHSBM fed group scored the highest value (65.4 g), followed by the Brazil SBM fed group (62.1 g) and India SBM fed group (62.1 g). There was an effect of interaction between origins of soybean meal fed group in growing and laying period on eggshell color (p<0.01). Eggshell was significantly stronger in the USDHSBM fed (for growing period) groups than other groups (p<0.05) on $31^{st}$ week. Haugh's unit (HU), albumin index and yolk index of the USDHSBM fed group in growing stage were significantly superior (p<0.001) to other groups. In experiment 2, for the 7-week, chicks on the India SBM group gained less (p<0.001) weight than other groups. While daily gain of India SBM chicks was not affected by dietary crude protein level, those of the USDHSBM and Brazil SBM chicks were linearly increased as dietary crude protein level increased from 18% to 20%. The gain per feed ratio of the USDHSBM group was the highest (0.585), followed by the Brazil SBM group (0.568) and India SBM group (0.550) (p<0.01). Therefore, in this experiment, the use of USDHSBM with excellent protein quality and amino acid digestibility could be of advantage to the economic production of layer and broiler.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.146-147
• /
• 2011

Processing a large area substrate for liquid crystal display (LCD) or solar panel applications in a capacitively coupled plasma (CCP) reactor is becoming increasingly challenging because of the size of the substrate size is no longer negligible compared to the wavelength of the applied radio frequency (RF) power. The situation is even worse when the driving frequency is increased to the Very High Frequency (VHF) range. When the substrate size is still smaller than 1/8 of the wavelength, one can obtain reasonably uniform process results by utilizing with methods such as tailoring the precursor gas distribution by adjustingthrough shower head hole distribution or hole size modification, locally adjusting the distance between the substrate and the electrode, and shaping shower head holes to modulate the hollow cathode effect modifying theand plasma density distribution by shaping shower head holes to adjust the follow cathode effect. At higher frequencies, such as 40 MHz for Gen 8.5 (2.2 m${\times}$2.6 m substrate), these methods are not effective, because the substrate is large enough that first node of the standing wave appears within the substrate. In such a case, the plasma discharge cannot be sustained at the node and results in an extremely non-uniform process. At Applied Materials, we have studied several methods of modifying the standing wave pattern to adjusting improve process non-uniformity for a Gen 8.5 size CCP reactor operating in the VHF range. First, we used magnetic materials (ferrite) to modify wave propagation. We placed ferrite blocks along two opposing edges of the powered electrode. This changes the boundary condition for electro-magnetic waves, and as a result, the standing wave pattern is significantly stretched towards the ferrite lined edges. In conjunction with a phase modulation technique, we have seen improvement in process uniformity. Another method involves feeding 40 MHz from four feed points near the four corners of the electrode. The phase between each feed points are dynamically adjusted to modify the resulting interference pattern, which in turn modulate the plasma distribution in time and affect the process uniformity. We achieved process uniformity of <20% with this method. A third method involves using two frequencies. In this case 40 MHz is used in a supplementary manner to improve the performance of 13 MHz process. Even at 13 MHz, the RF electric field falls off around the corners and edges on a Gen 8.5 substrate. Although, the conventional methods mentioned above improve the uniformity, they have limitations, and they cannot compensate especially as the applied power is increased, which causes the wavelength becomes shorter. 40 MHz is used to overcome such limitations. 13 MHz is applied at the center, and 40 MHz at the four corners. By modulating the interference between the signals from the four feed points, we found that 40 MHz power is preferentially channeled towards the edges and corners. We will discuss an innovative method of controlling 40 MHz to achieve this effect.

• Journal of Ecology and Environment
• /
• 제46권2호
• /
• pp.136-143
• /
• 2022

Background: In northern Thailand, the longan flower is the principal nectar source for honey production. Microorganisms play a critical function in the agricultural ecology. The morphological characteristics of fungal species found in longan pollen were studied. Aspergillus spp. were found to be invertase-producing strains and were employed in the longan syrup production process. The purpose of this study was to evaluate the effects of invertase-added longan syrup on the adult honey bee population numbers that were fed by this syrup for 16 weeks. Results: Different fungal species were found in longan pollen samples. Aspergillus was the main genus, with three predominant sections: Nigri, Flavi, and Terrei. Other isolated species were Trichoderma spp., Rhizopus spp., Neurospora spp., Chaetomium spp., Fusarium spp. and Penicillium spp. However, Aspergillus spp. is the only fungal species that produces the enzyme invertase. The invertase-producing strains belonging to the Aspergillus section Nigri were found to be A. niger LP5 with an optimum activity at pH 6.0 and 60℃. When A. niger LP5 invertase was used for longan syrup processing, the highest levels of glucose (3.45%) and fructose (2.08%) were found in invertase added longan syrup (C), while fresh (A) and boiled longan syrup (B) had lower contents of both sugars. The sucrose content was detected in (A) at 4.25%, while (B) and (C) were at 4.02% and 3.08%, respectively. An appropriate amount of sugar to feed and maintain the honey bee population was considered. The data showed no statistically significant differences between the two selected forms of longan syrup compared to the sugar syrup examined by the adult honey bee population. Conclusions: The main species of isolated fungi from longan pollen were Aspergillus spp. The discovery of an invertase-producing strain of A. niger LP5 has enabled its application for enzyme utilization in the invert sugar preparation process. The adult worker bee populations fed by longan syrup from both boiled and invertase-added sources showed an increasing trend. Artificial syrup made from longan fruit to feed honey bees when natural food sources are limited can be applied.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권6호
• /
• pp.823-829
• /
• 2016

Eight Holstein steers ($216{\pm}48kg$ body weight) fitted with ruminal and duodenal cannulas were used to evaluate effects of wheat straw processing (ground vs pelleted) at two straw inclusion rates (7% and 14%; dry matter basis) in dry rolled or steam-flaked corn-based finishing diets on characteristics of digestion. The experimental design was a split plot consisting of two simultaneous $4{\times}4$ Latin squares. Increasing straw level reduced ruminal (p<0.01) and total tract (p = 0.03) organic matter (OM) digestion. As expected, increasing wheat straw level from 7% to 14% decreased (p<0.05) ruminal and total tract digestion of OM. Digestion of neutral detergent fiber (NDF) and starch, per se, were not affected (p>0.10) by wheat straw level. Likewise, straw level did not influence ruminal acetate and propionate molar proportions or estimated methane production (p>0.10). Pelleting straw did not affect ($p{\geq}0.48$) ruminal digestion of OM, NDF, and starch, or microbial efficiency. Ruminal feed N digestion was greater (7.4%; p = 0.02) for ground than for pelleted wheat straw diets. Although ruminal starch digestion was not affected by straw processing, post-ruminal (p<0.01), and total-tract starch (p = 0.05) digestion were greater for ground than for pelleted wheat straw diets, resulting in a tendency for increased post-ruminal (p = 0.06) and total tract (p = 0.07) OM digestion. Pelleting wheat straw decreased (p<0.01) ruminal pH, although ruminal volatile fatty acids (VFA) concentration and estimated methane were not affected ($p{\geq}0.27$). Ruminal digestion of OM and starch, and post-ruminal and total tract digestion of OM, starch and N were greater (p<0.01) for steam-flaked than for dry rolled corn-based diets. Ruminal NDF digestion was greater (p = 0.02) for dry rolled than for steam-flaked corn, although total tract NDF digestion was unaffected (p = 0.94). Ruminal microbial efficiency and ruminal degradation of feed N were not affected (p>0.14) by corn processing. However, microbial N flow to the small intestine and ruminal N efficiency (non-ammonia N flow to the small intestine/N intake) were greater (p<0.01) for steam-flaked than for dry rolled corn-based diets. Ruminal pH and total VFA concentration were not affected ($p{\geq}0.16$) by corn processing method. Compared with dry rolled corn, steam-flaked corn-based diets resulted in decreased acetate:propionate molar ratio (p = 0.02). It is concluded that at 7% or 14% straw inclusion rate, changes in physical characteristics of wheat straw brought about by pelleting negatively impact OM digestion of both steam-flaked and dry-rolled corn-based finishing diets. This effect is due to decreased post-ruminal starch digestion. Replacement of ground straw with pelleted straw also may decrease ruminal pH.

• 유기물자원화
• /
• 제13권1호
• /
• pp.71-78
• /
• 2005

지렁이를 이용하여 음식물쓰레기를 처리하고 처리 후 발생되는 분변토는 음식물쓰레기 수분조절제 및 토양개량제로 사용하여, 기존의 음식물쓰레기 처리방법의 문제점 해결과 아울러 지렁이를 이용한 음식물쓰레기 자원화를 목적으로 연구한 결과, 음식물쓰레기 전처리 공정은 세척, 분쇄 및 혼합 등의 공정으로 이루어 졌으며, 음식물쓰레기 염분농도는 평균 0.7%로 나타나 지렁이 먹이로 적합하지 않았으나 세척수를 이용하여 세척공정을 거친 후 0.38%로 낮아져, 지렁이 생육에 적합한 염분농도 조절을 위하여 식기 세척수를 이용한 세척공정이 필요한 것으로 나타났다. 또한 지렁이를 이용한 음식물쓰레기 처리 가능성 실험에서 입자의 크기가 작을수록 처리효율이 높은 것으로 나타나 2mm이하의 분쇄공정이 필요한 것으로 나타났으며, 음식물쓰레기 수분조절을 위한 분변토 혼합은 비율이 높을수록 처리효율이 높은 것으로 나타났으나, 경제성을 고려 할 때 5:5의 비율이 가장 적합한 것으로 판단된다. 음식물쓰레기 전처리 공정을 거친 후 지렁이 퇴비화장치에 투여, 15일간 운영하면서 처리과정별 pH, EC, Eh, 염분, VS 등의 이화학적 항목을 살펴본 결과 투입에서 분변토 발생까지 지렁이 생존에 적합한 환경을 유지하여 지렁이를 이용하여 음식물쓰레기 처리가 가능한 것으로 나타났으며, 처리 후 발생된 분변토는 부숙토 제품기준에 적합한 것으로 나타나 지렁이를 이용한 음식물쓰레기 처리 후 발생된 분변토의 재활용이 가능한 것으로 나타났다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권8호
• /
• pp.1292-1300
• /
• 2020

Objective: To explore feed resources capable of replacing regular poor-quality fodder, this study was conducted to evaluate the effects of additives on the fermentation quality, in vitro digestibility and aerobic stability of mulberry leaves silage. Methods: The mulberry leaves were ensiled either untreated (control) or treated with 1×10⁶ cfu/g fresh matter Lactobacillus plantarum (L), 1% glucose (G), 3% molasses (M), a combination of 1% glucose and Lactobacillus plantarum (L+G), and a combination of 3% molasses and Lactobacillus plantarum (L+M). The fermentation quality and chemical composition were analyzed after 7, 14, 30, and 60 d, respectively. The 60-d silages were subjected to an aerobic stability test and fermented with buffered rumen fluid to measure the digestibility. Results: Inoculating lactic acid bacteria (LAB) resulted in more rapid increase in lactic acid concentrations and decline in pH of mulberry leaves silage as compared control. Higher acetic acid and lower ethanol and ammonia nitrogen concentrations (p<0.05) were observed in the LAB-inoculated silages as opposed to control during ensiling. The LAB-inoculated silages contained lower water-soluble carbohydrates compared with control during the first 14 d of ensiling, and lower neutral detergent fibre (p<0.05) concentrations as compared with non-LAB inoculated silages. Adding molasses alone increased (p<0.05) the digestibility of dry matter (DM). The aerobic stability of mulberry leaves silage was increased by LAB inoculation, whereas decreased by adding glucose or molasses. Conclusion: The LAB inoculation improved fermentation quality and aerobic stability of mulberry leaves silage, while adding glucose or molasses failed to affect the fermentation and impaired the aerobic stability. Inoculating LAB alone is recommended for mulberry leaves especially when ensiled at a relatively high DM.

• 한국분말재료학회지
• /
• 제28권6호
• /
• pp.491-496
• /
• 2021

The process optimization of directed energy deposition (DED) has become imperative in the manufacture of reliable products. However, an energy-density-based approach without a sufficient powder feed rate hinders the attainment of an appropriate processing window for DED-processed materials. Optimizing the processing of DED-processed Ti-6Al- 4V alloys using energy per unit area (E_eff) and powder deposition density (PDD_eff) as parameters helps overcome this problem in the present work. The experimental results show a lack of fusion, complete melting, and overmelting regions, which can be differentiated using energy per unit mass as a measure. Moreover, the optimized processing window (E_eff = 44~47 J/mm² and PDD_eff = 0.002~0.0025 g/mm²) is located within the complete melting region. This result shows that the Eeff and PDDeff-based processing optimization methodology is effective for estimating the properties of DED-processed materials.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.278-278
• /
• 2022

Recently, the yield potential of high yield Tongil-type rice varieties has greatly increased, reaching 817kg/10a(Geumgang No.1). Moreover, in order to promote rice consumption and strengthen the competitiveness of the rice processing industry, the R&D of high yield Tongil-type rice varieties for each processing purpose, such as rice noodles, grain feed and industrial materials, has been continuously carried out. However, because Tongil-type rice varieties or lines are generally very vulnerable to cold damage, cold tolerance test can be said to be absolutely necessary to improve the cultivation safety. This study is the result of the seedling and field cold tolerance characteristic tests carried out in 2021 of high yield Tongil-type rice breeding lines. For the cold tolerance characteristic test of seedlings, total 303 high yield rice breeding lines for processing were treated in cold water of 13℃ and irrigation depth of 4cm for 10 days from the third-leaf age, then it was evaluated by comparing the degree of discoloration and withering with the checked varieties(Boramchan, Hanahreum No.2). Also, for the test of field, total 186 high yield rice breeding lines for processing were treated in cold water of 17℃ by keeping pouring day and night from 30 days after transplanting to ripening stage, then it was evaluated by comparing the degree of discoloration, delay of heading, shortening rate of stem length and percent of fertile grain etc. with the checked varieties. And the cold tolerance evaluative criteria were classified as strong(1~3), medium(4~6) and weak(7~9) in overall cold tolerance. (Seedling test) As for the degree of cold tolerance of the check variety, 'Boramchan' and 'Hanahreum No.2' showed a response of 'medium' and 'weak', respectively. However, there was no 'strong' line in the high yield rice breeding lines, 2 lines showed a 'medium' response, and 301 lines showed a 'weak' response. Therefore, except for a few lines(0.7%), most lines(99.3%) showed a 'weak' response. (Field test) In terms of the overall cold tolerance of the check variety, both 'Boramchan' and 'Hanahreum No.2' showed a 'medium' response. Similarly, there was no 'strong' line in the case of high yield rice breeding lines, 20 lines showed a 'medium' response, and 166 lines showed a 'weak' response. Therefore, except for some(10.8%) lines, most(89.2%) lines showed a 'weak' response. From the above results, we selected about 100 individuals with less seed shattering and degeneration of the ear tip, and with a relatively high percent of fertile grain, and are continuing to select lines with improved cold tolerance in the F4~F5 group in this year. As such, most of the Tongil-type rice varieties have poor cold tolerance and thus have low cultivation safety at low temperatures. However, it is important to select improved lines through generational progress because there are some lines that still have a certain level of cold tolerance among them.