• 한국기계연구소 소보
• /
• s.18
• /
• pp.29-35
• /
• 1988

When low sliding velocities in the boundary lubrication range are operating, irregular movements frequently occur which are a result of the stick-slip phenomenon. Such slide motions are undesirable in precision machine tools, particularly with feed back systems used in numerical and adaptive control machine tools. Accordingly, this paper reports analytical and experimental studies in the stick-slip characteristic of machine tool feeding system. The main conclusions of this study are as follows; The tendency towards stick-slip effects may be reduced by; 1). Reducing the drop in friction coefficient in the Stribeck curve(on the rising part of the friction characteristic at higher sliding speeds, the system is stable all the time) 2). Reducing the transition velocity by the use of a higher viscosity lubricating oil. 3). Increasing the stiffness(Damping)and reducing normal load(Sliding mass) Therefore, the Critical velocity is decided from the above conclusions and in designing of machine tool, feed rates(sliding velocity)must be design the more than critical velocity.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.11 no.1
• /
• pp.39-44
• /
• 2015

The fracture toughness of 2.25Cr-1Mo cast steel (SA217-WC9) samples which were taken from the check valves of feed water piping of Korean Standard Nuclear Power Plant(KSNPP) was measured by Master Curve method. The measured $T_0$ reference temperature of SA217-WC9 steel was $-30^{\circ}C$. The obtained $T_0$ was compared to the derived value from Charpy impact test data following to SINTEP procedure. The heat-to-heat variation in fracture toughness of SA217-WC9 steel was observed. It was found that the low toughness of a heat of SA217-WC9 steel was attributed to the coarse MnS inclusion originated by high sulfur content as the results of microanalyses.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.5
• /
• pp.14-21
• /
• 2010

In this study, presintered low purity alumina ceramics were machined with various tools to clarify the effects of the tool material, cutting condition and tool geometry on machinability. The main conclusions obtained were as follows. (a)The wear of tungsten carbide tool becomes smaller with the increase of the feed and clearance angle, and with the decrease of rake angle, especially exhibiting considerably smaller wear with both the decrease of rake angle and the increase of clearance angle. (b) So far as turning the ceramic presintered at low temperature, the diamond tool shows the best performance with higher feed. (c) The effect on the tool wear of the feed, clearance angle and rake angle becomes smaller in turning the ceramic presintered at higher temperature. (d) The tool wear is not severely affected by the depth of cut.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.5
• /
• pp.134-139
• /
• 1998

There have been so manu study in the ultra-precision mirror finishing. Already Using system of experiments extract factors effecting surface roughness and find optimal machining conditions in 40${\mu}{\textrm}{m}$, 30${\mu}{\textrm}{m}$, 15${\mu}{\textrm}{m}$ abrasive film. So in this study, Using Abrasive film of 12~3${\mu}{\textrm}{m}$ extract factors effecting surface roughness and results are follows; Factor A(film feed) in 12${\mu}{\textrm}{m}$ and 5${\mu}{\textrm}{m}$ abrasive film, Factor A(film feed) and B(applied force) in 9${\mu}{\textrm}{m}$ abrasive film, Factor C(grinding speed) in 3${\mu}{\textrm}{m}$ abrasive film are main factor effecting surface roughness.

• Journal of Power Electronics
• /
• v.14 no.4
• /
• pp.687-694
• /
• 2014

This paper focuses on the analysis and compensation of thrust ripples in permanent magnet linear synchronous motors (PMLSM). The main drawback in PMLSMs is the presence of thrust ripples, which are mainly due to the interaction between the permanent magnets and armature slotted core. These thrust ripples reduce the performance of the drive system in high precision applications especially at low speeds. This paper analyzes thrust ripples using the discrete wavelet transform. These undesired thrust ripples are compensated by using an adaptive feed forward controller. It is observed that this novel controller reduces about 65 percent of the thrust ripples. An extensive simulation is performed through MATLAB and it is validated through experimental results using a d-SPACE system with a DS1104 control board.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.943-953
• /
• 2007

In this paper, we propose a Cassegrain antenna with a scalar feed horn opt rating in Ka-band. For an effective EM simulation of the Cassegrain antenna, the near-field of the feed hone is used ai the equivalent source of the Cassegrain antenna using the surface equivalent theorem. A corrugated circular horn operating with $HE_{11}$ mode is used as the feed horn. The angle and feed center of the main and sub reflectors are optimized to achieve maximum antenna efficiency. The designed feed horn shows the gain of 19dBi, the side-lobe level of less than -25dB and the half power beam width of $20^{\circ}$ at 33 GHz. The Cassegrain antenna shows the gain of 41dBi, the efficiency of 60%, the side-lobe level of less than -20dB and the half power beam width of $1.2^{\circ}$.

• Fisheries and Aquatic Sciences
• /
• v.27 no.3
• /
• pp.195-205
• /
• 2024

Amphipoda is a benthic fauna occupying aquatic environments that can be used as a live feed for mud crabs. The abundance of amphipods in the water is thought to impact the preying capacity of crablets, which in turn will affect their growth performance. This study aims to determine the preying capacity of the crablet stage of Scylla tranquebarica exposed at different densities (20, 30, and 40 amphipods / 0.5 L) of amphipod, Grandidierella megnae. The preying capacity was estimated by counting the number of amphipods ingested by an individual crablet during the 60-day rearing period. The main parameters measured were daily consumption rate (DCR), Cumulative molting (CM), Feed conversion ratio (FCR), and the specific growth rate of weight (SGR-W). The results showed that the DCR and FCR were not affected by amphipod densities but the higher the amphipod density the higher the SGR-W and CM. Based on this study, 30 amphipods / 0.5 L is recommended as the optimal density to optimize the DCR and improve the growth performance of crablets. It is also proposed that surplus live feed will potentially reduce the cannibalism rate of crablets during weaning. However, more research needs to be carried out to elucidate the benefits of crablet-feeding amphipods in communal systems.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.11
• /
• pp.1641-1648
• /
• 2015

This study was conducted to evaluate the effects of various protein sources (soybean meal, SBM; cottonseed protein, CSP; double-zero rapeseed meal, DRM) on the internal quality of refrigerated eggs. A total of 360 laying hens (32 wk of age) were randomly allotted to six treatment groups (five replicates per treatment) and fed diets containing SBM, CSP, or DRM individually or in combination with equal crude protein content (SBM-CSP, SBM-DRM, and CSP-DRM) as the protein ingredient(s). A $6{\times}3$ factorial arrangement was employed with dietary types and storage time (0 d, 2 wk, and 4 wk) as the main effects. After 12 wk of diet feeding, a total of 270 eggs were collected for egg quality determination. The egg Haugh unit (HU) in the CSP, SBM-DRM, and DRM groups were significantly lower than those in the SBM and SBM-CSP groups. The hardness and springiness of the cooked yolk in the CSP group were significantly higher than those in the other treatment groups. A lower HU, lower yolk index and higher albumen pH were observed in the DRM group compared to the SBM and SBM-CSP groups when the eggs were stored to 4 wk, and the HU was improved in the CSP-DRM group compared to the DRM group (p<0.05). Higher yolk hardness was observed in the CSP group compared to the other groups during storage (p<0.05), but the hardness of the cooked yolk in the SBM-CSP and CSP-DRM groups showed no difference in comparison to the SBM group. In conclusion, CSP may ameliorate the negative effects of DRM on the HU of refrigerated eggs, and SBM or DRM may alleviate the adverse effects of CSP on yolk hardness.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.11
• /
• pp.1651-1658
• /
• 2008

This study was conducted to determine the effects of dietary supplementation of either 100 mg/kg chito-oligosaccharide (COS) or chlortetracycline (CTC) with corn-soybean-fish meal on immunity in broiler chickens. A total of 147 one-day old male broiler chicks were randomly allocated to 3 treatments with 7 replicate pens per treatment and 7 birds per pen. The experimental diets consisted of a control diet based on corn, soybean and fish meal without COS and any antibiotic supplement and similar diets supplemented with either CTC (80 mg/kg from d 1 to 21 and 50 mg/kg from d 22 to 42) or COS (100 mg/kg from d 1 to 42). During the entire experimental period, all birds had ad libitum access to diets and water. The main immune organ indices, T-lymphocyte proliferation, serum cytokine concentrations, serum NO level and serum iNOS activity were measured on d 21 and d 42. On d 21, broilers fed 100 mg/kg COS had improved (p<0.01) indices of spleen, thymus, and bursa of Fabricius compared with the control and CTC birds. Birds receiving 100 mg/kg COS had higher (p<0.05) serum concentrations of $IL-1{\beta}$, IL-6, IgM, NO and iNOS than birds on the control treatment. Serum $Ca^{2+}$ level of birds fed 100 mg/kg COS tended to be higher (p = 0.049) than in birds fed CTC. On d 42, the birds fed 100 mg/kg COS had higher (p<0.05) concentrations of TNF-${\alpha}$ and IgM in serum than birds in both the CTC and control treatments. Birds fed 100 mg/kg COS had a higher concentration of IFN-$\gamma$ than the control group. In conclusion, dietary supplementation of COS appeared to improve the immunity of broilers by promoting the weight of the main immune organs, increasing IgM secretion, stimulating microphages to release $TNF-{\alpha}$, $IL-1{\beta}$, IL-6 and IFN-$\gamma$, and activating iNOS to induce NO.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.12
• /
• pp.1223-1231
• /
• 2010

The design is presented for a SATCOM antenna capable of simultaneous multi-band (X/Ku/Ka-Band) communications without replacement of feed horns or change of other parts in the application as a ground satellite terminal for large data transfer. The antenna is the offset configuration and consists of a dual-band(X/Ka-band) feed horn, a single-band(Ku-band) feed horn, a frequency selective surface(FSS) sub-reflector and a parabolic main-reflector. The antenna has a main reflector defining a prime focus and a frequency selective surface sub-reflector defining an image focus. A dual-band feed and a single-band feed are provided at each of the prime focus and image focus. The antenna is designed using 3D EM simulator and the gains measured in X/Ku/Ka-band of the complete antenna assembly is more than 31.6dBi, 36.8dBi, 40.8dBi, and the cross polarization is 21.7dB, 26.6dB, 25.2dB, respectively.