• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.03a
• /
• pp.54-61
• /
• 1995

Simultaneous forward-backward extrusion upsetting has been carried out by ratray forging. Two materials has been used commericaly 6.61 aluminium ally and 0.2% steel. The effects of working conditions ; spiral feed ; initial aspect ration of specimen and lubricating condition on the backward and forward extrusion were clarified. The extrusion length increases a sthe aspect rationof the specimen increases, the backward extrusion lengthbeing relatively larger than the forward one. The effects of the spiral feed and the material on the extrusion lengthis remarkably large for the large spiral feed.

• 축산식품과학과 산업
• /
• v.10 no.1
• /
• pp.22-30
• /
• 2021

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.3
• /
• pp.247-255
• /
• 2019

This study was conducted to investigate the effects of extrusion pressure and particle size of feed ingredients on the growth performance and plasma hormone activity in juvenile olive flounder Paralichthys olivaceus. Experimental diets were prepared with extrusion pressure manipulated by screw speed [low pressure (LP), 885 rpm/min; high pressure (HP), 708 rpm/min] and different dietary particle sizes [specific surface area: small (SS), $169.9m^2/kg$; large (LS), $67.4m^2/kg$] in a two-level factorial design. Four experimental diets (LP+SS, LP+LS, HP+SS, and HP+LS) were randomly assigned to 12 tanks (3 replicates) stocked with 20 fish (initial weight, 57 g) per tank. After a 4-week feeding trial, the observable trends of the main effects of extrusion pressure and particle size on growth performance showed that LP and SS enhanced fish weight gain. The plasma insulin-like growth factor-I level was significantly higher in fish fed the LP+SS diet than in fish fed the HP+SS diet. These results indicate that manipulation of the physical qualities of feed through adjustment of extrusion pressure and feed ingredient particle size may influence the growth performance of juvenile olive flounder, which should be considered in feed manufacture.

• Preventive Nutrition and Food Science
• /
• v.17 no.3
• /
• pp.203-209
• /
• 2012

The effects of variable moisture content, screw speed and barrel temperature on the physicochemical properties of red ginseng powder extrudates were investigated. The raw red ginseng powders were processed in a co-rotating intermeshing twin-screw extruder. Primary extrusion variables were feed moisture content (20 and 30%), screw speed (200 and 250 rpm) and barrel temperature (115 and $130^{\circ}C$). Extruded red ginseng showed higher crude saponin contents (6.72~7.18%) than raw red ginseng (5.50%). Tested extrusion conditions did not significantly affect the crude saponin content of extrudates. Increased feed moisture content resulted in increased bulk density, specific length, water absorption index (WAI), breaking strength, elastic modulus and crude protein content and decreased water solubility index (WSI) and expansion (p<0.05). Increased barrel temperature resulted in increased total sugar content, but decreased reducing sugar content in the extrudate (p<0.05). Furthermore, increased barrel temperature resulted in increased amino acid content and specific length and decreased expansion and bulk density of extrudates only at a higher feed moisture content. The physicochemical properties of extrudates were mainly dependent on the feed moisture content and barrel temperature, whereas the screw speed showed a lesser effect. These results will be used to help define optimized process conditions for controlling and predicting qualities and characteristics of extruded red ginseng.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.404-413
• /
• 1995

System parameters (extrusion temperature, extrusion pressure, specific mechanical energy, mean residence time) were analysed on three different screw configurations during twin-screw extrusion of wheat bran. Experiments were conducted over a screw speed of $280{\sim}380\;rpm$, feed rate of $22{\sim}38\;kg/hr$ and moisture content of $17{\sim}33%$ using screws assembled with 3, 4, and 5 reverse screw elements (RSE) adjacent to the heating zone of the barrel. Extrusion temperature increased with increasing RSE but it decreased with increasing feed rate and moisture content. Decreasing the filling ratio of the screw resulted in a lower extrusion pressure, and increasing the length of the RSE gave similar results due to the higher temperature and lower viscosity of melted dough. It was also observed that increasing the feed rate and decreasing moisture content resulted in the reduced extrusion pressure. Specific mechanical energy (SME) decreased when the feed rate and moisture content increased, and SME increased when using RSE posses from 3 to 5. Screw configuration posses with 4 RSE yielded the longest RT, and the smaller the die hole, the higher the RT. In contrast, RT decreased when the feed rate increased. With increasing moisture content RT for 3 RSE increased, but that for 4 and 5 RSE decreased.

• Preventive Nutrition and Food Science
• /
• v.19 no.2
• /
• pp.124-127
• /
• 2014

The effect of feed moisture contents (30%, 40%, and 50%) and screw speed (200 rpm, 250 rpm, and 300 rpm) on the corn fiber gum (CFG) yield and soluble arabinoxylans (SAX) content of destarched corn fiber was investigated. The CFG yields and SAX contents of extruded, destarched corn fiber were higher than that of destarched corn fiber. In extruded, destarched corn fiber, increased screw speed and decreased feed moisture contents resulted in a higher SAX contents. The maximum yields of CFG obtained from extruded, destarched corn fiber were $79.1{\pm}19.0g/kg$ (30% feed moisture content) and $82.3{\pm}11.30g/kg$ (300 rpm screw speed). The highest SAX content was also observed at a screw speed of 300 rpm. The results of the present study show that water extraction and extrusion combined have the potential to increase CFG and SAX yields from corn fiber.

• Preventive Nutrition and Food Science
• /
• v.6 no.3
• /
• pp.163-169
• /
• 2001

To produce expanded, minimally hard extrudates from blends of raw pork meat (20%), defatted soy flour (25%), and corn starch using a single-screw extruder, various combinations of feed moisture, process temperature, and screw speed were evaluated. First series of extrusion runs were conducted according to a central composite rotatable design/response surface methodology (RSM). Upon assessing the full model for each response, insignificant terms were eliminated to determine final response surface models. Screw speed within the range evaluated was found to have no significant effect on expansion ratio (ER) or shear force (SF) of extrudates. Since examinations of the response surfaces and their generated grids of predicted values indicated that maximum ER and minimum SF were likely to be attained with a moisture-temperature combination outside the RSM experimental range, the second series of extrusion runs were conducted with several selected combinations of moisture and temperature to determine a practical optimum extrusion condition. The combination of 22.78% feed moisture, 16$0^{\circ}C$ process temperature, and 170 rpm screw speed was chosen as such a condition, and used in the final extrusion. The final product required less force to break than did commercial pretzel sticks.

• Animal Bioscience
• /
• v.36 no.10
• /
• pp.1546-1557
• /
• 2023

Objective: The present study aimed to evaluate the effects of extruded and unextruded feeding on the performance, milk composition, digestibility and ruminal fermentation of dairy cows through a meta-analysis. Methods: The database was compiled from 53 studies in Scopus and PubMed. The data were analyzed using a random effects model in OpenMEE software. Extruded feed was grouped as the experiment group while and the others as control group. The bias of publication in the main parameter of dairy performance was evaluated by a funnel plot. Results: The result showed that extruded feed enhanced the milk yield, dry matter and crude protein digestibility, butyrate and valerate acid production (p<0.05). Meanwhile, the extruded feed significantly decreased the milk fat and protein concentration (p<0.05). Also, the iso-butyrate and iso-valerate in unextruded feeding was significantly higher than the extruded feed (p<0.05). Conclusion: It was concluded from the meta-analysis that extruded feed effectively improved the milk production and milk lactose concentration, dry matter and protein digestibility, but not the milk fat and protein concentration.

• Journal of Biosystems Engineering
• /
• v.30 no.1 s.108
• /
• pp.8-16
• /
• 2005

The extrusion-cooking condition on Cordyceps pruinosa was designed using twin-screw extruder. Response surface methodology (RSM) was used to investigate extrusion-cooking using a central composition design with varying die temperature $(114-146^{\circ}C)$, feed moisture $(22-38\%)$, feed rate (4-14 ka/h) and screw speed (120-280 rpm). System parameters (die pressure and specific mechanical energy (SME)) and extrudate parameters (density and water solubility index (WSI)) were statically analyzed using RSH. Die pressure was significantly affected by temperature, moisture contents and feed rate. SM was affected by screw speed and feed rate. When die temperature is $130^{\circ}C$ and moisture content $25\%$, the optimum pressure is shown. SME is about 20 Wh/kg, when feed rate is $10\~12kg/min$ and screw speed $200\~250rpm$. WSI was affected by temperature and moisture contents. Density was not affected by any factor. WSI increases by $7\%$ from about $23\%$ to about $30\%$, as temperature is raised from $120^{\circ}C\;to\;140^{\circ}C$. The WSI of Cordyceps pruinosa pulverized after extruding (PE) is about $26.97\%$ higher than that of raw material and $10\%$ higher than that of pulverized after drying (PD). The content of unsaturated fatty acid were not significantly different in PD and PE. Anti-oxidative activity of PE was 1.67-2.2 times higher than that of PD in Cordyceps pruinosa using 1- dipheny1-2-picrylhydrazyl method (DPPH).

• Korean Journal of Poultry Science
• /
• v.17 no.4
• /
• pp.284-295
• /
• 1990

Dietary levels of 0%, 0225%, 0.45% inorganic phosphorus in the form of tricalcium phosphate were included in two different experimental diets, which contains 40% of wheat bran with or without extrusion. It is to examine the effects of extruded wheat bran containing different Bevels of inorganic phosphorus on the performance of broiler chicks, including the nutrient availabilities, compared with that of the diet containing non－extruded wheat bran. The results are as follows； 1. Regardless dietary levels of inorganic phosphorus, the weight gain in general was higher for the groups fed non－extruded wheat bran but little significance was seen between the groups of extruded and the non－extruded. However, the effect of dietary inclusion of inorganic phosphorus on the weight gain was evident and the gain was higher in the groups receiving the higher levies of inorgainc phosphorus but failed to observe the significant difference between the added groups of 0.225% and 0.45% of inorganic phosphorus, suggesting that a considerable amount of phytin phosphorus in wheat bran is available to meet the requirement. 2. For the feed intake, there was a tendency for the groups fed extruded wheat bran consuming more feed, compared with that of the non－extruded but little significance was observed. This was also true between the groups of receiving 0.225% and 0.45% inorganic phosphorus t The feed efficiency was improved by the addition of inorgainc phosphorus, but failed to observe the significance between the added groups. 4. The dry matter digestibility was improved in proportion to increasing the levels of inorganic phosphorus for the both groups of extruded and the non－extruded This indicates that addition of extruded wheat bran has little effects on improving the digestibility. 5. Within the added groups of 0.225% and 0.45% inorganic phosphorus, the protein digestibility was increased with including the extruded wheat bran in the diet However, the effect on body weight gain was not evident. 6. The calcium and phosphorus content of tibia was shown the tendency of increasing with increasing the dietary levels of inorganic phosphorus but close correlation with dietary levels of inorganic phosphorus was not noted in tibia contents of calcium and phosphorus.